PRELIMINARY DATA SHEET
MOS FIELD EFFECT TRANSISTOR
SWITCHING
N-CHANNEL POWER MOS FET
INDUSTRIAL USE
2SK3430
DESCRIPTION
The 2SK3430 is N-channel MOS Field Effect Transistor
designed for high current switching applications.
FEATURES
•Super low on-state resistance:
★
DS(on)1
= 7.3 mΩ MAX. (VGS = 10 V, ID = 40 A)
R
★
DS(on)2
= 15 mΩ MAX. (VGS = 4 V, ID = 40 A)
R
★
•Low C
iss
iss
: C
= 2800 pF TYP.
•Built-in gate protection diode
ABSOLUTE MAXIMUM RATINGS (TA = 25°C)
GSS
D(DC)
D(pulse)
I
AS
I
E
DSS
T
T
ch
stg
AS
Drain to Source Voltage V
Gate to Source Voltage V
Drain Current (DC) I
Drain Current (pulse)
Total Power Dissipation (T
Total Power Dissipation (T
Channel Temperature T
Storage Temperature T
★
Single Avalanche Current
★
Single Avalanche Energy
Notes 1.
PW ≤ 10
2.
Starting Tch = 25 °C, RG = 25 Ω, VGS = 20 V → 0 V
Note1
C
= 25°C) P
A
= 25°C) P
Note2
Note2
µ
s, Duty cycle ≤ 1 %
ORDERING INFORMATION
PART NUMBER PACKAGE
40 V
20 V
±
80 A
±
200 A
±
84 W
1.5 W
150 °C
–55 to +150 °C
37 A
137 mJ
2SK3430
2SK3430-S
2SK3430-Z
TO-220AB
TO-262
TO-220SMD
(TO-220AB)
(TO-262)
(TO-220SMD)
THERMAL RESISTANCE
Channel to Case Rth(ch-C) 1.49
Channel to Ambient Rth(ch-A) 83.3
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC representative for
availability and additional information.
Document No. D14599EJ1V0DS00 (1st edition)
Date Published March 2000 NS CP(K)
Printed in Japan
The mark ★ shows major revised points.
C/W
°
C/W
°
©
1999,2000
2SK3430
ELECTRICAL CHARACTERISTICS (TA = 25 °C)
CHARACTERISTICS SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNIT
★
Drain to Source On-state Resi stance R
★
Gate to Source Cut-off Voltage V
Forward Transfer Admittance | yfs |VDS = 10 V, ID = 40 A2040S
Drain Leakage Current I
Gate to Source Leakage Current I
★
Input Capacitance C
Output Capacitance C
★
Reverse Transfer Capacitance C
★
Turn-on Delay Time t
★
Rise Time t
★
Turn-off Delay Time t
★
Fall Time t
Total Gate Charge Q
★
Gate to Source Charge Q
Gate to Drain Charge Q
★
Body Diode Forward Voltage V
★
Reverse Recovery Time t
★
Reverse Recovery Charge Q
DS(on)1VGS
DS(on)2VGS
R
GS(off)VDS
DSS
GSS
iss
oss
rss
d(on)ID
r
d(off)
f
G
GS
GD
F(S-D)IF
rr
rr
= 10 V, ID = 40 A 5.9 7.3 m
= 4 V, ID = 40 A 10.5 15 m
Ω
Ω
= 10 V, ID = 1 mA 1.5 2.0 2.5 V
VDS = 40 V, VGS = 0 V10
VGS = ±20 V, VDS = 0 V
10
±
A
µ
A
µ
VDS = 10 V, VGS = 0 V, f = 1 MHz 2800 pF
730 pF
320 pF
= 40 A, V
RG = 10
GS(on)
= 10 V, VDD = 20 V, 110 ns
Ω
1800 ns
170 ns
350 ns
ID = 80 A , VDD = 32 V, VGS = 10 V50nC
10 nC
14 nC
= 80 A, VGS = 0 V1.0V
IF = 80 A, VGS = 0 V, 50 ns
di/dt = 100 A/µ s77nC
TEST CIRCUIT 1 AVALANCHE CAPABILITY
PG.
VGS = 20 → 0 V
V
G
R
DD
= 25 Ω
50 Ω
I
D
D.U.T.
I
AS
BV
DSS
V
DS
Starting T
L
DD
V
ch
TEST CIRCUIT 3 GATE CHARGE
D.U.T.
I
G
PG.
= 2 mA
50 Ω
R
L
V
DD
TEST CIRCUIT 2 SWITCHING TIME
D.U.T.
R
PG.
V
GS
0
τ
τ = 1 µs
Duty Cycle ≤ 1 %
G
V
V
GS
Wave Form
I
D
Wave Form
GS
10 %
0
I
D
10 %10
0
t
d(on)
V
90
%
I
trt
t
on
GS(on)
D
d(off)tf
%
90
90
%
%
t
off
L
R
V
DD
2
Preliminary Data Sheet D14599EJ1V0DS00
PACKAGE DRAWINGS (Unit: mm)
2SK3430
1) TO-220AB (MP-25)
10.6 MAX.
10.0
3.0±0.3
4
2 3
1
1.3±0.2
0.75±0.1
2.54 TYP.
φ
3.6±0.2
5.9 MIN.6.0 MAX.
2.54 TYP.
15.5 MAX.12.7 MIN.
0.5±0.2
1.Gate
2.Drain
3.Source
4.Fin (Drain)
4.8 MAX.
1.3±0.2
2.8±0.2
2) TO-262 (MP-25 Fin Cut)
(10)
4
1
2 3
1.3±0.2
0.75±0.3
2.54 TYP. 2.54 TYP.
1.0±0.5
8.5±0.2
12.7 MIN.
4.8 MAX.
0.5±0.2
1.Gate
2.Drain
3.Source
4.Fin (Drain)
1.3±0.2
2.8±0.2
3) TO-220SMD (MP-25Z)
(10)
4
1.0±0.5
1.4±0.2
1.0±0.3
2.54 TYP. 2.54 TYP.
Remark
123
The diode connected between the gate and source of the transistor serves as a protector against ESD.
When this device actually used, an additional protection circuit is externally required if a voltage
exceeding the rated voltage may be applied to this device.
3.0±0.5
11±0.4
2.8±0.2
8.5±0.2
(0.5R)
4.8 MAX.
(0.8R)
1.Gate
2.Drain
3.Source
4.Fin (Drain)
1.3±0.2
0.5±0.2
EQUIVALENT CIRCUIT
Drain
Body
Gate
Gate
Protection
Diode
Source
Diode
Preliminary Data Sheet D14599EJ1V0DS00
3
2SK3430
• The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
• No part of this document may be copied or reproduced in any form or by any means without the prior written
consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in
this document.
• NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual property
rights of third parties by or arising from use of a device described herein or any other liability arising from use
of such device. No license, either express, implied or otherwise, is granted under any patents, copyrights or other
intellectual property rights of NEC Corporation or others.
• Descriptions of circuits, software, and other related information in this document are provided for illustrative
purposes in semiconductor product operation and application examples. The incorporation of these circuits,
software, and information in the design of the customer's equipment shall be done under the full responsibility
of the customer. NEC Corporation assumes no responsibility for any losses incurred by the customer or third
parties arising from the use of these circuits, software, and information.
• While NEC Corporation has been making continuous effort to enhance the reliability of its semiconductor devices,
the possibility of defects cannot be eliminated entirely. To minimize risks of damage or injury to persons or
property arising from a defect in an NEC semiconductor device, customers must incorporate sufficient safety
measures in its design, such as redundancy, fire-containment, and anti-failure features.
• NEC devices are classified into the following three quality grades:
"Standard", "Special", and "Specific". The Specific quality grade applies only to devices developed based on a
customer designated "quality assurance program" for a specific application. The recommended applications of
a device depend on its quality grade, as indicated below. Customers must check the quality grade of each device
before using it in a particular application.
Standard: Computers, office equipment, communications equipment, test and measurement equipment,
audio and visual equipment, home electronic appliances, machine tools, personal electronic
equipment and industrial robots
Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support)
Specific: Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems or medical equipment for life support, etc.
The quality grade of NEC devices is "Standard" unless otherwise specified in NEC's Data Sheets or Data Books.
If customers intend to use NEC devices for applications other than those specified for Standard quality grade,
they should contact an NEC sales representative in advance.
M7 98. 8
Loading...