NCR 7702, 7703, RealPOS 5968 X, RealPOS XR7, RealPOS XR7 Plus Kit Instructions
KIT INSTRUCTIONS
X-Series Integrated Keypad
7702-K149/K349
Issue D
The product described in this document is a licensed product of NCR Corporation.
NCR is a registered trademark of NCR Corporation. NCR RealPOS is a trademark of NCR Corporation in the United States
and/or other countries. Other product names mentioned in this publication may be trademarks or registered trademarks of their
respective companies and are hereby acknowledged.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks
of HDMI Licensing LLC in the United States and other countries.
Where creation of derivative works, modifications or copies of this NCR copyrighted documentation is permitted under the terms
and conditions of an agreement you have with NCR, NCR's copyright notice must be included.
It is the policy of NCR Corporation (NCR) to improve products as new technology, components, software, and firmware become
available. NCR, therefore, reserves the right to change specifications without prior notice.
All features, functions, and operations described herein may not be marketed by NCR in all parts of the world. In some instances,
photographs are of equipment prototypes. Therefore, before using this document, consult with your NCR representative or NCR
office for information that is applicable and current.
To maintain the quality of our publications, we need your comments on the accuracy, clarity, organization, and value of this book.
Please use the link below to send your comments.
EMail: FD230036@ncr.com
Copyright © 2015–2018
By NCR Corporation
Atlanta, GA U.S.A.
All Rights Reserved
Revision Record
Issue Date Remarks
A May 2015 First Issue
B May 2017 Added Keypad Driver section
C June 2017 Added Keypad/Keyboard Remap Utility
D Aug 2018 Added K349 keytip dimensions
X-Series Integrated Keypad
This kit provides an Integrated Keypad for the following 15" Displays:
• RealPOS XR7 (7702) POS
• RealPOSXR7 Plus (7703) POS
• RealPOS 5968 X-Series Display
Note: 7702-K349 includes these keytips and lenses:
• 1x1 "00" Key, Black (Qty. 1)
• 1x2 "0" Key, Black (Qty. 1)
• 1x1 Keytip Lens (Qty. 1)
• 1x1.5 Keytip Lens (Qty. 11)
• 2x1.5 Keytip Lens (Qty. 1)
K349 Keytip Dimensions
Keytip Top Size (mm) Label size (mm)
Keytip
Height Width
1x1 13.89 13.89 1.4 13.59 13.59 1.4
1x1.5 13.89 23.39 1.4 13.59 23.09 1.4
1x2 13.89 32.94 1.4 13.59 32.64 1.4
2x1.5 32.94 23.39 1.4 32.64 23.09 1.4
Corner
Radius
Height Width
Corner
Radius
Note: The label sizes (height and width) allow 0.15 mm space from label edge to keytip
edge on opposite edges.
2 X-Series Integrated Keypad
Installation Procedure
XR7/XR7 Plus POS
1. Lay the terminal face down on a flat surface, using a protective foam/cloth.
2. Remove the Base Stand and Rear Cover assembly.
a. Loosen the captive screws (2) that secure the Rear Cover to the chassis.
b. Pivot the assembly as shown to remove it.
Loading...