IMPORTANT SAFETY INSTRUCTIONS ............................................................................................................................................. 3
IMPORTANT LABEL LOCATIONS ............................................................................................................................................. 5
SUPPORT AND SERVICE ...........................................................................................................................................11
Overall WeightWidthLengthHeightMax User Weight Max Load Weight
202 lbs (92 kg)60 in (152 cm)62 in (157 cm)35 in (89 cm)0-350 lbs (0-158 kg)0-360 lbs (0-163 kg)
All products may be covered by US and Foreign Patents and Patents Pending.
Page 2
IMPORTANT SAFETY INSTRUCTIONS
WARNING!
Before using this product, it is essential to read the ENTIRE operations manual and ALL installation
instructions. The Owner’s manual describes equipment setup and instructs members on how to use
correctly and safely.
Read all warnings posted on the machine.
Health related injuries may result from incorrect or excessive use of exercise equipment. NAUTILUS
strongly recommends you to encourage your members to discuss their health program or tness
regimen with a health care professional, especially if you or they have not exercised for several years,
are over 35, or have known health conditions.
Safety and warning information
It is the sole responsibility of the purchaser of Nautilus®
products to read the owner’s manual, warning labels and
instruct all individuals, whether they are the end user or
supervising personnel on proper usage of the equipment.
Nautilus recommends that all commercial tness equipment be used in a supervised area. It is recommended
that the equipment be located in an access controlled
area. Control is the responsibility of the facility owner. The
extent of control is at the discretion of the owner.
Proper Usage
WARNING: It is recommended that all users of
Nautilus exercise equipment be informed of the following
information prior to its use.
Do not use any equipment in any way other than designed or intended by the manufacturer. It is imperative
that Nautilus equipment be used properly to avoid injury.
Keep hands and feet clear at all times from moving parts
to avoid injury.
Read all machine warnings and seek the instruction of a
qualied tness professional prior to using any Nautilus
strength product.
Anchoring Equipment
WARNING: All equipment MUST be secured (bolted
and tightened) to a solid, level surface, using a minimum
of 3 of the anchoring holes provided, to stabilize and
eliminate rocking or tipping over. Shim any mounting
surface that does not rest thoroughly on the oor using
at washers, DO NOT force the foot to contact the ground
with anchors.
Fasteners must have a minimum of 500 lbs. tensile capacity, be a bolt of grade 2 or better and be installed per the
bolt manufacturer’s specications.
MACHINE CLEARANCE AND SPACING
CAUTION: Due to the wide variety of ooring on
which equipment may be anchored or installed and
dierences in applicable local building codes, Core Health
& Fitness is not responsible for any damage to the ooring
that may result due to anchoring or installing equipment
to the oor and for compliance with local building codes.
Only licensed contractors or certied installers should be
used to insure proper anchoring, installation, and compliance with local building code.
For the safe operation of Leverage Strength NAUTILUS
recommends that a minimum clearance of 24 inches
(60.96cm) be maintained between and behind machines
including moving arms and levers. To insure safe entry and
exit to each unit a walkway of at least 36 inches (91.44cm)
is recommended in front of, or on the entry side of each
machine.
Check for damaged parts
CAUTION: DO NOT use any equipment that is
damaged and or has worn or broken parts. Use only
replacement parts supplied by Nautilus® and Core Health
& Fitness.
MAINTAIN LABELS AND NAMEPLATES: Do not remove labels for any reason. They contain important information. If
unreadable or missing, contact Nautilus for a replacement.
Page 3
MAINTAIN ALL EQUIPMENT: Preventative maintenance
is the key to smooth operating equipment as well as
keeping the product in safe operating condition. Failure
to conduct preventative maintenance by the owner may
cause the product to operate in an unsafe manner. Equipment needs to be inspected and maintained at regular
intervals per the preventative maintenance schedule
provided in this manual.
Ensure that any person(s) making adjustments or performing maintenance or repair of any kind is qualied to do so.
Nautilus will provide service and maintenance training at
our corporate facility upon request or in the eld if proper
arrangements are made.
WARNING - to reduce the risk of injury to
person:
1. This equipment is designed for use in a commercial
gymnasium or health club. To ensure the proper use
of the equipment in a safe manner, all users of the
equipment should read this manual before using the
machine. This machine should be made a part of your
club training program in order that the equipment is
used by your members in a safe manner as intended.
In addition to instructing the club members in the
proper use of the equipment, the club member should
obtain a complete physical examination form their
health care provider before beginning any exercise
program.
2. This machine is not intended to be used by children.
It is not intended to be used by persons with reduced
physical, sensory, or mental capabilities or lack of
experience and knowledge, unless given instruction
and under the personal supervision concerning use
of the machine by a person responsible for their
safety. Do not leave children unsupervised around the
machine.
become short of breath or feel faint. If you feel pain or
experience any abnormal symptoms, stop exercising
and consult your health care provider.
5. The safety and integrity of this machine can only
be maintained when the equipment is regularly
examined for damage and wear and repaired. It is the
sole responsibility of the owner of this equipment to
ensure that regular maintenance is performed. Worn
or damaged parts must be replaced immediately or
the equipment removed from service until the repair
is made.
6. Ensure all adjustment and locking features are
properly secured before using the equipment.
7. Use only replacement components supplied by
Nautilus®. Substitutes are forbidden and will void all
warranties.
8. Wear proper exercise clothing and athletic shoes
during a workout. Avoid wearing loose clothing. Tie
back long hair and keep towels away from the moving
parts.
9. Never use dumbbells or other means to incrementally
increase the weight resistance. Use only those means
provided by Nautilus. Do not exceed maximum the
user load of – 360 lbs.
10. Do not exceed the maximum specied user weight of
350 lbs.
SAVE THESE INSTRUCTIONS
3. Do not wear loose or dangling clothing or jewelry
while using selectorized strength equipment. Stay
clear of all moving components.
4. Do not over exert yourself during exercise. Stop
exercising if you feel pain or tightness in your chest,
Page 4
IMPORTANT LABEL LOCATIONS
This page shows examples of the Nautilus® Leverage Strength® warning labels and communication stickers placed on the equipment
as part of the manufacturing process. It is critical that owners maintain the integrity and placement of these stickers. If you nd any
stickers missing or damaged each sample indicated includes its corresponding part number so that replacements may be ordered.
NOTE: STICKERS AND LABELS ARE NOT SHOWN TO SCALE
050-5593
Warning
Warning
731-0512
050-5585
Instructions
Instructions
Serial Label
Serial Label
support.nautilusstrength.com
1-800-503-1221
731-7920
Warning
Warning
PN:731-7920
Pinch Point
Pinch Point
731-0517
Bolt Down Label
Bolt Down Label
Page 5
OPERATIONS
Page 6
INSTALLATION
GENERAL NOTES:
• Unless otherwise noted Loctite
242/243 or equivalent thread
locker must be used on all
threaded fasteners. (Do not use
thread locker when a Nyloc nut is
used.)
• All equipment MUST be secured to the oor using either 10mm or 3/8in. (grade 5 minimum) bolts.
• Equipment can be secured to the oor using MAXIMUM of either 20mm or 3/4in. (grade 5 minimum) bolts.
• This Installation Instructions Manual must be used in conjunction with the equipment’s Owner’s Manual. The
Owner’s manual describes equipment setup and instructs members on how to use it correctly and safely.
THREAD LOCKER APPLICATION: Clean all threads and holes, apply no more than 3-4 drops per bolt.
Thru HolesBlind Holes
Required Tools
• 13mm Box / Open-End Wrench• 4mm Hex Key Socket
• Torque Wrench
Metric Steel Bolts Torque Specications
Bolt SizeThread PitchTorque, N-m (lbs-ft)
6mm1.2510 to13.5 (8 to10)
8mm1.2525.5 to 28.5 (19 to 21)
10mm1.7555.5 to 58 (41 to 43)
12mm1.2561 to 65 (45 to 48)
• Torque all hardware to values as specied above, unless noted otherwise.
• See hardware sheet of this manual for fastener sizing information; for reference only.
• Note: All torque values are in N-m unless otherwise stated.
PACKAGING REMOVAL:
Carefully remove all packaging materials that wrap the equipment. DO NOT USE A KNIFE OR BOX CUTTER AS
YOU MAY DAMAGE THE EQUIPMENT. At this time remove any sub-components from the pallet and set aside
for later assembly.
Once all packaging has been removed, lay all parts out in a clean open area to prepare for assembly.
Should any component not be present or if you have any operational questions, please refer to Contact Information on
page 11.
Page 7
Assembly Instructions
1. Install the four (4) rubber feet onto the bottom of the
frame.
2. Use a 6mm allen key and a 16mm open-ended wrench to
secure the foot plate to the frame using four (4) pieces each
of the M10 x 30mm screw, M10 at washer, and M10 nylock
nut.
3. Use a 16mm open-ended wrench and a 17mm socket to
secure the weight catch arms to the frame using two (2)
pieces each of the M10 x 110mm bolt, pivot shaft, and M10
nylock nut and four (4) pieces of the M10 fender washer.
2
121
4. Lower the back-rest assembly into position, then insert the
shaft into the frame and through the back-rest assembly.
5. Slide the user right side cap onto the shaft then use a
13mm socket to secure one (1) piece each of the M8 washer and M8 to lock the cap in place.
6. Use a 6mm allen key to secure one (1) piece of the M8 x
16mm set screw into the user right side bearing assembly.
Repeat this step for the user left side.
Page 8
5
656
MAINTENANCE
With durable, high performance components, this equipment is designed for heavy usage with minimal maintenance
required. To keep it in top condition, perform regular daily, weekly and monthly preventive maintenance routines outlined below.
The safety and integrity of this machine can only be maintained when the equipment is regularly examined for damage
and wear and repaired. It is the sole responsibility of the owner of this equipment to ensure that regular maintenance
is performed. Worn or damaged parts must be replaced immediately or the equipment removed from service until the
repair is made.
MAINTENANCE SCHEDULE
DailyWeeklyMonthlyBi-Annually
Inspect
Seat Belt
Fasteners
Handgrips
Upholstery
Labels
Main Frame
Cleaning
Upholstery
Hand Grips
Main Frame
X
X
X
X
X
X
X
X
X
Page 9
WARNING: MAINTAIN ALL EQUIPMENT: Preventative maintenance is the key to smooth op-
erating equipment as well as keeping the product in safe operating condition. Failure to conduct
preventative maintenance by the owner may cause the product to operate in an unsafe manner.
Equipment needs to be inspected and maintained at regular intervals per the preventative maintenance schedule provided in this manual.
Cleaning
Keeping your Nautilus® units clean is an important component of preventative maintenance and
the overall aesthetics of your product. While your clients will appreciate clean equipment free of
sweat, dirt and other contaminants proper care and cleaning will extend the life of your product and
reduce premature aging and wear.
• Upholstery should be cleaned daily with a mild soap and water mix or an approved antibacterial cleaner.
• Seat Belt should be cleaned weekly. Clean belt with a damp cloth, Use only a water based solution with a mild
hand soap. DO NOT immerse. DO NOT use any other chemicals, dry with a clean cloth.
• Hand grips should be cleaned daily with a mild soap and water mix or an approved antibacterial cleaner.
• Main frame should be cleaned weekly with mild soap and water mix dampened cloth or an approved antibacterial cleaner to remove all dust and accumulated contaminants.
• Note – do not use cleaners that contain solvents, alcohol or abrasives.
Inspection
Visual inspection of your Nautilus® units will insure a safe environment for your clients and alert you
to any issues that may require maintenance prior to equipment failure. Proper, timely visual inspection is a critical component to the long term care of your product.
• Fasteners, hardware and attachments should be checked monthly for looseness. Tighten as required using
appropriate tools.
• Seat Belt should be inspected for wear or damage weekly and replaced as needed
• Handgrips should be checked for wear or damage monthly and replaced as needed.
• Upholstery should be inspected for wear or damage monthly and replaced as needed.
• Main frame and tower should be inspected every six months for signs of unusual wear, corrosion or structural
integrity issues.
Page 10
SUPPORT AND SERVICE
The Nautilus Support website provides a wealth of resources to help you get the best experience
from your Inspiration Strength unit. It is important to check the website periodically for Owner’s
Manual and Installation Instructions, Service Bulletins, and other information. The resources include:
•Contact number and email for Technical Support
Go to https://support.corehandf.com/ for support information and information on all
Nautilus products.
•Updated Owner’s Manual, Installation Instructions, Service Bulletins, Instructional Videos,
and other information. https://support.corehandf.com/NAUTILUS
Contact Information
CORE HEALTH & FITNESS
4400 NE 77th Avenue, Suite 300
Vancouver, WA 98662
Telephone: (888) 678-2476
http://www.corehandf.com
Please supply the serial number of your Inspiration and the date of purchase when you call. Use the
space in the boxes below to write down this information.
Serial Number
Date of Purchase
You may download the latest version of the Installation Guide, as well as view instructional videos,
by visiting the support website at:
Customer Support
Contact your local distributor, or Core Health &
Fitness directly at: 1-800-503-1221
support@corehandf.com
https://support.corehandf.com/NAUTILUS
Page 11
WARRANTY
Core Health & Fitness, LLC Limited Warranty
Commercial Fitness Products
CORE HEALTH & FITNESS, LLC, warrants to the original purchaser that its Commercial Fitness Products are free of defects in
workmanship and materials. Mechanical parts are covered for a period of two (2) years from date of purchase. Electronic
parts are covered for one (1) year from the date of purchase. Labor is covered for a period of one (1) year from the date of
purchase. Frames are warranted for 10 years from the date of purchase.
During the applicable warranty period, CORE HEALTH & FITNESS, LLC, will either repair or replace, at its option, defective
part(s) at no charge. The Manufacturer does not warrant the heart rate system performance on its products, as the heart
rate system performance varies, based on a user’s physiology, fitness level, age, method of use and other factors. Furthermore, the heart rate system is not for medical use.
In order to implement the provisions of this limited warranty, the original purchaser must contact Customer Support at
(888) 678-2476. Be prepared to provide the product serial number and a detailed description of the problem. Proof of
purchase or warranty registration will be needed to verify warranty effectivity and obtain warranty service and/or parts.
Do not return defective part(s) for repair or replacement without prior authorization.
CORE HEALTH & FITNESS, LLC, reserves the right to review defective part(s). All costs of shipping defective part(s) to and
from CORE HEALTH & FITNESS, LLC, for inspection shall be borne solely by the original purchaser. Any repair or modification of defective part(s) by anyone other than an Authorized Technical Representative or Authorized Service Provider will
void this warranty. If CORE HEALTH & FITNESS, LLC, determines, in its sole discretion, that it is impractical to ship defective
part(s) to CORE HEALTH & FITNESS, LLC, CORE HEALTH & FITNESS, LLC, may designate, in its sole discretion, a repair facility
to inspect and estimate the cost to repair such defective part(s). The cost, if any, of shipping defective part(s) to and from
such repair facility and of such estimate shall be borne solely by the original consumer purchaser. Defective part(s) must
remain available for inspection until the claim is finalized. Whenever claims are settled, CORE HEALTH & FITNESS, LLC,
reserves the right to be subrogated under any existing insurance policies the claimant may have.
EXCLUSIONS
This limited warranty does not apply to cosmetic damage, imperfections that are within design specification(s) or that do
not materially alter functionality, or damage due to acts of God, accident, abuse, misuse, negligence, lack of normal maintenance, abnormal service or handling that differs from that specified for this model, improper installation or operation.
In addition, alteration or modification of the product, or repair by anyone other than a CORE HEALTH & FITNESS, LLC, technical representative or authorized service provider will void this warranty. This warranty is valid only in the continental
United States. It is the purchaser’s responsibility to maintain the product per the owner’s manual instructions that comes
with each product. Failure to follow the maintenance instructions shall void the manufacturer’s warranty.
DISCLAIMER OF WARRANTIES; LIMITATION OF LIABILITY
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. REPAIR OR REPLACEMENT AS
PROVIDED ABOVE SHALL BE THE SOLE AND EXCLUSIVE REMEDY AVAILABLE TO THE PURCHASER. CORRECTION OF DEFECTS,
IN THE MANNER AND FOR THE PERIOD OF TIME DESCRIBED ABOVE, SHALL CONSTITUTE COMPLETE FULFILLMENT OF ALL
LIABILITIES AND RESPONSIBILITIES OF CORE HEALTH & FITNESS, LLC TO THE PURCHASER WITH RESPECT TO CONTRACT,
NEGLIGENCE, STRICT LIABILITY OR OTHERWISE. CORE HEALTH & FITNESS, LLC SHALL NOT BE LIABLE OR IN ANY WAY
RESPONSIBLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES BASED UPON BREACH OF ANY EXPRESS OR IMPLIED
WARRANTY ON THIS PRODUCT OR OTHERWISE.
Some states do not allow the exclusion or limitation of implied warranties or incidental or consequential damages, so the
above exclusions and limitations may not apply to you. This warranty gives you specific legal rights, and you may also
have other rights, which may vary, from state to state.
From P/N: 620-8360. REV: A. DOC., WARRANTY, COMMERCIAL Eective November, 2015