Nautilus E618 User Manual

4.5 (2)

E618

Manual en Español Latino Americano:

ASSEMBLY MANUAL / OWNER’S MANUAL

http://www.nautilus.com

TABLE OF CONTENTS

Important Safety Instructions

3

Safety Warning Labels / Serial Number

5

Grounding Instructions

6

Specifications

7

Before Assembly

7

Parts

8

Hardware

9

Tools

9

Assembly

10

Moving the Machine

23

Leveling the Machine

24

Features

25

Console Features

26

Bluetooth® Connectivity

29

Remote Heart Rate Monitor

31

Remote Resistance and Incline Controls

32

Suspension AdjustPedals

32

Operations

33

Power Up / Idle Mode

34

Initial Setup

34

Quick Start Program

34

User Profiles

35

Profile Programs

37

Pausing or Stopping

40

Results / Cool Down Mode

40

GOAL TRACK Statistics

41

Console Setup Mode

43

Maintenance

44

Heart Rate Chest Strap Battery Replacement

44

Maintenance Parts

45

Troubleshooting

47

Warranty

51

To validate warranty support, keep the original proof of purchase and record the following information:

Serial Number __________________________

Date of Purchase ____________________

To register your product warranty, go to: www.Nautilus.com/register Or call 1 (800) 605–3369.

If you have questions or problems with your product, please call 1 (800) NAUTILUS (628–8458).

Nautilus, Inc., (800) NAUTILUS / (800) 628-8458, www.NautilusInc.com - Customer Service: North America (800) 605-3369, csnls@nautilus.com | outside U.S. www.nautilusinternational.com | © 2015 Nautilus, Inc. ® indicates trademarks registered in the United States. These marks may be registered in other nations or otherwise protected by common law. Nautilus, the

Nautilus logo, Nautilus Trainer, Nautilus Connect, Bowflex, Schwinn, Suspension Adjust, and Universal are trademarks owned by or licensed to Nautilus, Inc. Polar®, OwnCode®, Loctite®, iTunes®, Google Play™, Under Armour® and MyFitnessPal® are trademarks of their respective owners. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Nautilus, Inc. is under license.

2

IMPORTANT SAFETY INSTRUCTIONS

This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Obey the following warnings:

Read and understand all warnings on this machine.

Carefully read and understand the Assembly instructions. Read and understand the complete Manual. Keep the Manual for future reference.

To reduce the risk of electrical shock or unsupervised usage of the equipment, always unplug this machine from the electrical outlet immediately after using and before cleaning.

Keep bystanders and children away from the product you are assembling at all times.

Do not connect power supply to the machine until instructed to do so.

The machine should never be left unattended when plugged in. Unplug from outlet when not in use, and before putting on or taking off parts.

Before each use, examine the machine for damage to power cord, loose parts or signs of wear. Do not use if found in this condition. Contact Nautilus Customer Service for repair information.

Do not drop or put objects into any opening of the machine.

Do not assemble this machine outdoors or in a wet or moist location.

Make sure assembly is done in an appropriate work space away from foot traffic and exposure to bystanders.

Some components of the machine can be heavy or awkward. Use a second person when doing the assembly steps involving these parts. Do not do steps that involve heavy lifting or awkward movements on your own.

Set up this machine on a solid, level, horizontal surface.

Do not try to change the design or functionality of this machine. This could compromise the safety of this machine and will void the warranty.

If replacement parts are necessary, use only genuine Nautilus replacement parts and hardware. Failure to use genuine replacement parts can cause a risk to users, keep the machine from operating correctly and void the warranty.

Do not use until the machine has been fully assembled and inspected for correct performance in accordance with the Manual.

Use this machine only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.

Do all assembly steps in the sequence given. Incorrect assembly can lead to injury or incorrect function.

Connect this machine to a properly grounded outlet only (see Grounding Instructions).

Keep the power cord away from heat sources and hot surfaces.

Do not operate where aerosol products are being used.

To disconnect, turn all controls to the off position, then remove plug from outlet.

Silicone lubricant is not intended for human consumption. Keep out of reach of children. Store in a safe place.

SAVE THESE INSTRUCTIONS.

3

This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Before using this equipment, obey the following warnings:

Read and understand the complete Manual. Keep the Manual for future reference.

Read and understand all warnings on this machine. If at any time the Warning labels become loose, unreadable or dislodged, contact Nautilus Customer Service for replacement labels.

Children must not be let on or near to this machine. Moving parts and other features of the machine can be dangerous to children.

Not intended for use by anyone under 14 years of age.

Consult a physician before you start an exercise program. Stop exercising if you feel pain or tightness in your chest, become short of breath, or feel faint. Contact your doctor before you use the machine again. Use the values calculated or measured by the machine’s computer for reference purposes only.

Before each use, examine this machine for loose parts or signs of wear. Do not use if found in this condition.

Monitor the Pedals and Crank Arms closely. Contact Nautilus Customer Service for repair information.

Maximum user weight limit: 350 lbs. (158.8 kg). Do not use if you are over this weight.

This machine is for home use only.

Do not wear loose clothing or jewelry. This machine contains moving parts. Do not put fingers or other objects into moving parts of the exercise equipment.

Set up and operate this machine on a solid, level, horizontal surface.

Make the Foot Pedals stable before you step on them. Use caution when you step on and off the machine.

Disconnect all power before servicing this machine.

Do not operate this machine outdoors or in moist or wet locations.

Keep at least 24” (0.6 m) on each side of the machine clear. This is the recommended safe distance for access and passage around and emergency dismounts from the machine. Keep third parties out of this space when machine is in use.

Do not over exert yourself during exercise. Operate the machine in the manner described in this manual.

Correctly adjust and safely engage all Positional Adjustment Devices. Make sure that the Adjustment Devices do not hit the user.

Keep the Foot Pedals clean and dry.

Exercise on this machine requires coordination and balance. Be sure to anticipate that changes in speed and resistance level can occur during workouts, and be attentive in order to avoid loss of balance and possible injury.

A machine should never be left unattended when plugged in. Unplug from outlet when not in use, and before putting on or taking off parts.

Prior to use, read and understand the owner’s manual. The appliance is not to be used by persons with functional limitations and impairments, reduced physical, sensory or mental capabilities, or lack of experience and knowledge.

4

SAFETY WARNING LABELS AND SERIAL NUMBER

WARNING!

• Injury or death is possible if caution is not used while using this machine.

• Keep children and pets away.

• Read and follow all warnings on this machine.

• Refer to the Owner’s Manual for additional warnings and safety information.

• The heart rate displayed is an approximation and should be used for reference only.

• Not intended for use by anyone under 14 years of age.

• The maximum user weight for this machine is 350 lbs ( 158 kg ).

• This machine is for home use only.

Serial Number

Product Specification

FCC Compliance

!Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

The machine and power supply comply with Part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This machine and power supply have been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

5

Grounding Instructions

This product must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

Improper connection of the equipment-grounding conductor can result in a risk of electric shock.

Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product – if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

This machine is for use on a nominal 120-V circuit, and has a grounding plug that looks like the plug illustrated below. A temporary adapter that looks like the adapter illustrated may be used to connect this plug to a 2-pole receptacle as shown if a properly grounded outlet is not available.

The temporary adapter should be used only until a properly grounded outlet can be installed by a qualified electrician. The green colored rigid ear, lug, or the like extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box cover. Whenever the adapter is used, it must be held in place by a metal screw.

 

Grounded

 

 

Outlet

Adapter

 

 

Metal Screw

 

Grounded

 

Grounding Pin

Outlet Box

Tab for

 

Grounding

 

 

 

 

Screw

6

SPECIFICATIONS

66.9” (170 cm)

 

73”

27”

(185.5 cm)

(68.5 cm)

 

Maximum User Weight: 350 lbs. (158.8 kg) Maximum Pedal Height - with full incline: 28” (72 cm)

Machine Weight:

209.7 lbs. (95.1 kg)

Power Requirements:

 

 

Operational Voltage:

120V AC

Operating Current:

2 A

 

Heart Rate Chest Strap:

1 CR2032 battery

Regulatory Approvals:

UL listed, Rated 120V AC, 60Hz Input, 2 A.

WARNING: This product, its packaging, and components contain chemicals known to the State of California to cause cancer, birth defects, or reproductive harm. This Notice is provided in accordance with California’s Proposition 65. If you would like additional information, please refer to our website at www.nautilus.com/prop65.

Before Assembly

Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a hard, level surface. Allow a workout area of a minimum 75” x 121” (1.9m x 3m). Be sure that the workout space you are utilizing has adequate height clearance, taking into consideration the height of the user and the maximum height of the pedals with the incline fully engaged.

Basic Assembly Tips

Follow these basic points when you assemble your machine:

Read and understand the “Important Safety Instructions” before assembly.

Collect all the pieces necessary for each assembly step.

Using the recommended wrenches, turn the bolts and nuts to the right (clockwise) to tighten, and the left (counterclockwise) to loosen, unless instructed otherwise.

When attaching 2 pieces, lightly lift and look through the bolt holes to help insert the bolt through the holes.

The assembly can require 2 people.

7

PARTS

 

 

3

 

 

 

 

26

 

 

5

6

25

 

2

 

 

7

 

 

 

4

 

 

 

1

 

 

24

 

 

 

 

 

 

 

 

8

 

 

 

 

 

23

19

12

 

9

 

10

 

 

 

 

 

9

21

 

11

10

 

 

 

 

 

 

22

 

 

 

 

 

 

20

 

 

 

14

 

 

 

 

 

 

 

 

 

13

 

 

18

 

 

 

 

 

17

 

 

15

 

 

 

 

 

 

 

 

16

 

 

 

A decal has been applied to all right (“ R ”) and left (“ L ”) parts to assist with assembly.

Item

Qty

Description

Item

Qty

Description

 

 

 

 

 

 

1

1

Console Mast

15

1

Left Pedal

2

1

Console Junction Cover

16

1

Frame

3

1

Console

17

1

Front Stabilizer

4

1

Static Handlebar

18

1

Lower Right Handlebar Arm

5

1

Water Bottle Holder Shroud, Right

19

1

Upper Right Handlebar Arm

6

1

Water Bottle Holder

20

1

Upper Shroud

7

1

Water Bottle Holder Shroud, Left

21

1

Shroud Cap

 

 

 

 

 

 

8

1

Upper Left Handlebar Arm

22

1

Right Leg

9

2

Handlebar Shroud, Outer

23

1

Right Pedal

10

2

Handlebar Shroud, Inner

24

1

MP3 Cord

11

1

Rail Assembly

25

1

Power Cord

12

1

Arm Pivot Rod

26

1

Heart Rate (HR) Chest Strap

13

1

Left Leg

27

1

Silicone Lubricant, Bottle (not shown)

14

1

Lower Left Handlebar Arm

 

 

 

 

 

 

 

 

 

8

HARDWARE / TOOLS

A

B

C

D

E

F

G

H

I

J

Item

Qty

Description

Item

Qty

Description

 

 

 

 

 

 

A

6

Button Head Hex Screw, M8x16 (with

G

8

Lock Washer, M8

 

 

Loctite® adhesive)

 

 

 

B

4

Serrated Washer, M8

H

2

Pivot Sleeve

C

8

Wide Washer, M8

I

5

Phillips Head Self tap Screw, M4.2x16

D

4

Button Head Hex Screw, M8x16

J

4

Phillips Head Screw, M5x12

E

2

Hex Head Screw, M8x20

 

 

 

F

6

Wave Washer

 

 

 

Note: Select pieces of Hardware have been provided as spares on the Hardware Card. Be aware that there may be remaining Hardware after the proper assembly of your machine.

Tools

Included

Not Included

6 mm

(recommended)

#2

13 mm

15 mm

19 mm

9

ASSEMBLY

1. Attach Front Stabilizer to Frame

Note: Hardware (*) is pre-installed and not on the Hardware Card.

6mm

X4

*

16

*

*

17

10

2. Attach Rail Assembly to Frame Assembly

Note: Hardware (*) is pre-installed and not on the Hardware Card. Separate the Rail mount plates (11a) and lift to align the holes and install the hardware.

The plastic scratch guard strips on the Rails help to protect the finish during assembly.

11a

11

11

3. Connect the Cables and Attach the Console Mast to Frame Assembly

NOTICE: Put the Console Mast through the opening in the Upper Shroud. Before you connect the cables, remove the wire tie that holds the Frame cables in place on the mount plate. Do not crimp cables. Fully tighten the hardware.

1

6mm

X4

D

B

20

12

4. Attach Legs to Frame Assembly

X2

22

F

13

X2

C

G

A

6mm

13

5. Install Water Bottle Holder on the Console Mast

NOTICE: Route the cable (1a) from the left side of the Mast to the rear of the crossbar and through the opening (7a) in the Water Bottle Holder Shroud. Do not crimp cables.

Repeat on the right side.

Install hardware and Water Bottle Holder. Push down until it snaps in place.

7 1a

5

1a 7a

X5

6

 

I

14

6. Install Arm Pivot Rod and Lower Handlebar Arms to Frame Assembly

Note: Be sure to put Wave Washers (F) on Arm Pivot Rod before attaching the Lower Handlebar Arms.

13 mm

X2

18

 

 

 

C

G 12

E

14

X2

F

15

Nautilus E618 User Manual

7. Attach Left Pedal to Leg and Lower Handlebar Arm

NOTICE: Attach the Pedal to the Leg first. Make sure the Pivot Sleeve (H) engages the Handlebar knuckle cover.

Repeat step on opposite side with the Right Pedal (Item 23 ).

15

F

6mm

C G A

15

H

A G C 6mm

H

23

16

Loading...
+ 36 hidden pages