Nautilus Sport, Be Strong Sport T514, Be Strong Sport T516, Be Strong Sport T518 Assembly Manual
Base Model: T514, T516, T518
Display Model: LE, LE-X, LC
Sport SerieS
ASSEMBLY MANUAL
Be Strong.
™
Model : T514
Model : T516
Model : T518
P/N: 00 0- 4844 Rev D (12/ 2005)
All treAdmillS Are not creAted equAl.
I
Nautilus® Sport Series Treadmill Assembly Manual
SI MPL ICI T Y
Our treadmills are so
well designed that they’re
simple to use. Touch one
key and go.
WHISP ER- Q UIE T DES IGN
With the sturdy steel frame
and stable platform, you
can expec t smooth, quiet
performance mile after mile.
BU ILT FO R THE LON G RUN
These cutting-edge machines
are patterned after our
commercial treadmills, which
you’ll find in gyms worldwide.
35-YEA R H ER ITAG E
Nautilus has been at the
forefront of the fitness
industry since there’s been
a fitness industry.
Thank you for purchasing your Nautilus® Sport Series treadmill. For more than 30 years Nautilus has been producing
the world’s finest fitness equipment used in health clubs and homes around the globe. We hope this product meets your
every expectation and is a valuable tool on the road to accomplishing all your fitness goals.
Please carefully read through this manual to familiarize yourself with the assembly of your new Nautilus® treadmill.
Doing so will help to ensure you get the most use out of your treadmill, with enjoyable workouts in the comfort of your
home.
Nautilus, Inc.
World Headquarters
16400 S.E. Nautilus Drive
Vancouver, Washington, USA 98683
1-800-NAUTILUS (1-800-628-8458)
Fax (800) 898-9410
Nautilus.com
PREFACE
II
tAble of contentS
PRODUCT SERIAL NUMBER LOCATIONS 1
PRODUCT SPECIFICATIONS 2
IMPORTANT SAFETy PRECAUTIONS 3
BEFORE yOU ASSEMBLE 5
PARTS LIST 6
HARDWARE AND TOOL LIST 7
BASE ASSEMBLy GUIDE 8
DISPLAy ASSEMBLy GUIDE 19
WARRANTy 23
IMPORTANT CONTACT NUMBERS 24
For detailed instructions and inFormation on how
to use and care For your nautilus
®
sport series
treadmill, model t514, t516 and t518, reFer to the
owner’s manual.
7 ! 2 . ) . '
! 4 4 % . 4 ) / .
$ ! . ' % 2
1
Nautilus® Sport Series Treadmill Assembly Manual
product SeriAl number locAtionS
DI SPLAY SERI AL NUMB ER LOCATIO N
(NOR TH A MERI CA ONLY)
The display serial number is located on the back
side of the display module. The display serial
number is present on units sold in North America.
The display serial label is only visible when the
display is detached from the base.
For units sold outside of North America, please
refer to the base serial number as described in the
Base Serial Number Location section.
In North America, the serial number and model
number listed on the decal located on the back
side of the display are required when completing
the enclosed warranty card and may be required
when calling Customer Service.
BASE SERI AL NUMB ER LOCATIO N
The serial number decal on the base can
be found on the left hand incline arm. This
decal is visible without removing any parts
on the treadmill. To more easily view the
serial number decal, incline the treadmill to
15%.
The serial number and model number listed
on this decal are required when completing
the enclosed warranty card and may be
required when calling Customer Service.
All Sports Series treadmills have a serial
label located on the base.
Serial Number Decal Location
LE Display
Serial Number Location
LE-X Display
Serial Number Location
LC Display
Serial Number Location
Regulatory Approvals
Meets:
Safety - EN 60335-1,
EMC Directive 89/336/EEC - European Union (EU),
EN 61000-6-3
EN 61000-6-1
Meets:
UL1647 3rd Ed
CSA C22.2 No. 68-92 CAN
Patent Information
U.S. and International Patents Pending
2
product SpecificAtionS
Treadmill deck PlaTforms
T514 T516 T518
Continuous HP 2.7 HP 3.0 HP Hyperdrive® Technology 3.0 HP Hyperdrive® Technology
User Weight Limit 350 lbs (159 kgs) 375 lbs (170 kgs) 375 lbs (170 kgs)
Maximum Grade 15% 15% 15%
Running Surface 20” x 57” ( 51cm x 1.4m) 20” x 57” (51cm x 1.4m) 20” x 60” ( 51cm x 1.5m)
Belt Ply Two Ply SuperSoft® Deck SuperSoft® Deck
Padding REACT® Deck REACT® Deck REACT® Deck
Board Surface Phenolic-Rev Phenolic-Rev Phenolic-Rev
Power Inlets Front Front Front and Rear
ROC™ Bar N/A N/A Standard
Grip Heart Rate N/A N/A Yes
Physical Dimensions
Width 30.1” (76cm) 30.1” (76cm ) 30.1” (76cm)
Length 82.8” (2.1m) 82.8” (2.1m) 85.8” (2.1m)
Height 18” (45cm) 18” (45cm) 18” (45cm)
Machine Weight 325 lbs 325 lbs 325 lbs
Shipping Weight 350 lbs 375 lbs 375 lbs
console disPlays
le le-X lc
Languages English English, French, English, French,
German, Spanish German, Spanish
Workout Programs 6 Preset, 2 Custom 9 Preset, 3 Custom 12 Preset, 3 Custom
Heart Rate Strap Yes Yes Yes
Heart Rate Program 2 Incline Controlled 2 Incline Controlled 2 Incline Controlled
Speed Range 0.5 - 12 MPH 0.5 - 12 MPH 0.5 - 12 MPH
( 0.8 - 19.3 KPH) (0.8 - 19.3 KPH) ( 0.8 - 19.3 KPH)
Optional Workout Software N /A My Nautilus™ Software, My Nautilus™ Software,
Heart Strong™ Software, Heart Strong™ Software,
My Nautilus™ LX My Nautilus™ LX
Shipping Weight Approx. 6 lbs Approx. 6 lbs Approx. 6 lbs
3
Nautilus® Sport Series Treadmill Assembly Manual
importAnt SAfety precAutionS
When using electrical equipment, always follow these
basic precautions:
IMPORTANT SAFETY INSTRUCTIONS
The following definitions apply to the word “Warning” found
throughout this manual:
Used to call attention to potential
hazards that could result in personal
injury or loss of life.
READ ALL INSTRUCTIONS BEFORE USING
THE MACHINE.
1. Do not plug the treadmill into an outlet until the final assembly
is complete and the motor cover is installed.
2. CONSULT YOUR PHYSICIAN BEFORE STARTING ANY EXERCISE
PROGRAM. Only he or she can determine the exercise program
that is appropriate for your particular age and condition. If
you have not been exercising or are pregnant or have a heart
condition or any physical limitation, failure to consult your
physician before engaging in physical exercise, such as using a
Nautilus® Sport Series treadmill , could result in serious injury
or death. If while using a Nautilus® Sport Series treadmill
you have any pain or tightness in your chest, an irregular heart
beat, shortness of breath, feel faint, light-headed or dizzy or
have any pain or discomfort, STOP and consult your physician
immediately.
3. Read, understand, and test the SAFETY STOP PROCEDURES in
the Owner’s Manual before using the treadmill.
4. The Safety Stop Cord does not turn off the electrical current
to the treadmill. The treadmill continues to draw power, even
when the display is off. To avoid electric shock, do not remove
treadmill motor covers or place hands beneath the treadmill
while the treadmill is plugged into a power source.
5. Review all of the warning labels on the treadmill before use.
6. The Nautilus® Spor t Series Treadmill, models T514, T516
and T518 are intended for home use only. The T514 maximum
user weight limit is 350 pounds (159 kilograms). The T516
and T518 maximum user weight limit is 3 75 pounds (170
kilograms) . Do not exceed the maximum user weight limits.
7. Before each use of this equipment, inspect the treadmill for
incorrect, worn, or loose components. The machine can be
safely used only when it is regularly inspected for damage or
wear. Inoperable components should be replaced, repaired, or
tightened immediately, or the equipment should be taken out
of use until repairs have been made.
8. Do not wear any loose or dangling clothing or jewelry while
using the Nautilus® Sport Series treadmill. Always keep your
hands, feet, clothing, etc. clear from beneath the treadmill and
from all moving parts. Never use your treadmill with the Motor
Cover or Frame Covers removed.
9. Always wear rubber-soled athletic shoes on the Nautilus®
Sport Series treadmill. Never use the treadmill barefooted or
wearing only socks.
10. Do not start the treadmill when someone is standing on
the belt. Always stand on the foot rails on each side of the
walking belt when starting the treadmill. Be careful when
mounting or dismounting the treadmill.
11. Keep speed and incline at the lowest settings when someone
is get ting on and off the treadmill.
12.
Keep the area underneath and around the treadmill clear.
Position the treadmill on a clean, level surface and do not
place the treadmill on t hick carpet as it may interfere with
proper ventilation. We recommend the use of a treadmill mat
that may be purchased from your treadmill dealer or Nautilus,
Inc.
To reduce the risk of electrical shock, always unplug the
external power supply from the electrical outlet before
cleaning, maintaining, or repairing.
To reduce the risk of burns, electric shock, or injury to
persons: Read this manual in full before operating the
treadmill. Failure to follow these guidelines can produce
a serious or possibly fatal electrical shock hazard or other
serious injury. Consult a qualified electrician as required.
7 ! 2 . ) . '
7 ! 2 . ) . '
4
importAnt SAfety precAutionS
13. Never position the treadmill with the back end (direction of
belt travel) facing a wall or any other objects such as furniture
or other pieces of fitness equipment. Failure to do so can
prevent safe exit of the treadmill in an emergency situation
such as falling. Allow a minimum of 79 inches ( 2 meters)
behind the treadmill and 20 inches (.5 meters ) on each side.
14. Before each use of this equipment , check the power cord,
plug, plug receptacle and outlet for signs of damage. If any of
them appears frayed, loose, worn, or otherwise faulty, or if
the insulation appears worn or cracked, do not operate the
machine. Position the treadmill so that the wall plug is visible
and accessible. If the power cord is damaged, it must be
replaced with a power cord from Nautilus, Inc.
15. To avoid potential safety and electrical problems, replace wi th
manufacturers’ specified parts only.
16. Always disconnect the treadmill from the power outlet before
cleaning, maintaining, servicing, or removing the motor cover.
17. This equipment is classified Class I, Type B, ordinary
equipment. Not protected against fluid ingress. Rated for
continuous operation. Do not operate this equipment in the
presence of flammable anesthetic mix tures.
18. Do not let liquid enter the display or motor/controller area. If
liquid enters either area, the area(s) must be inspected and
tested for safety by an approved technician before it can be
used again. Do not place the treadmill near water or outdoors.
Do not use the machine in damp or wet conditions.
19. Increased risk due to leakage of electrical current may result if
this equipment is not grounded properly.
20. The treadmill must be on an appropriate, dedicated electrical
circuit carrying 15 amps (110 Volt model) or 7 amps (22 0 Volt
model). Nothing else should be connected to the circuit . Use
of a surge protector is recommended.
21. Do not stand on treadmill motor cover or front trim cover.
22. Parents and others in charge of children should be aware that
children, because of their natural play instinct and fondness for
experimenting, may be tempted to situations and behavior for
which the equipment is not intended, with resulting damage to
the equipment and injury to the children or others. Children’s
access to the equipment should therefore be controlled, and
they should be instructed about the potential for personal injury
and damage if they play with the equipment.
Failure to follow the conditions set forth below shall limit , to the
extent allowed by law, Nautilus® Inc. responsibility for the safety,
reliability, and performance of this equipment.
• Each user must read the Owner’s Manual in full before using
the product. Each user must read, unders tand, and carefully
follow all warnings, instructions, and procedures regarding
the proper use of the treadmill and its accessories.
• Do not remove the treadmill motor covers: dangerous voltages
are present. Component s such as the motor, controller, and
display are serviceable only by qualified service personnel.
• The electrical wiring within the treadmill setting and the
electrical installation of the treadmill must comply with the
applicable local or provincial requirements.
• The equipment must be used in accordance with the
instructions for use.
• For further information or instruction on use, maintenance
or specifications, please contact your Authorized
Nautilus®
Retail Outlet.
5
Nautilus® Sport Series Treadmill Assembly Manual
before you ASSemble
Basic Assembly Principles
Here are few basic assembly tips that can make
assembly of your
Nautilus® Sport Series treadmill
quick and easy.
1. You can make the assembly process go faster
by gathering the pieces you need for each step
prior to starting the step.
2. As a general rule, and for all fasteners on your
Nautilus® Sport Series treadmill, turning toward
the right will tighten, turning towards the left
will loosen. An easy way to remember this is
by remembering the expression, “Lefty loosey,
righty tighty.”
3. The hex key and Phillips screwdriver tools
needed to assemble your Nautilus® Sport Series
treadmill are provided.
During the assembly
process a 1/2 inch Socket with Ratchet will also
be required. This tool is not provided. You may
find the use of a utility knife or scissors beneficial
during the unpacking process.
4. It is recommended that you use two people to
assemble your Nautilus® Sport Series treadmill.
Select Your Workout Area
Select where you are going to put your Nautilus®
Sport Series treadmill carefully. The best place for
your treadmill is on a hard, level surface. You will
need at least 20 inches (.5 meters) on each side of
the treadmill and 79 inches (2 meters) behind your
treadmill for dismount.
Make sure that the location you choose has a
grounded, 3-prong power outlet within reach of
the treadmill power cord.
NOTE: The Nautilus® Sport Series treadmill is
designed to plug into a grounded, non-GFI outlets
only. To determine if your outlet or circuit breaker
is GFI, look for a test and reset button on them.
If they have the test and reset button it is a GFI
outlet or circuit breaker.
Further, if you ever perform any repairs on your
treadmill that require you to lay it on its side, you
will need at least five feet to one side of your
workout area.
Machine Mat
The Nautilus® Machine Mat is an optional
accessory for the Nautilus® Sport Series treadmill
that helps keep your workout area free from debris
and dust. The rubber machine floor mat provides
a non-slip surface for you to use when mounting
and dismounting the treadmill and limits static
discharge when you touch the machine—greatly
reducing the possibility of display or running errors.
Further, a rubberized mat will protect your flooring
when you are performing repairs or maintenance
on the treadmill.
Put your Nautilus® Machine Mat in place in your
selected workout area before you start assembly
to protect your floors and your treadmill from
damage.
Positioning Your Nautilus® Sport Series
Treadmill
Take great care when moving your treadmill into
place prior to assembly.
There are two rear end caps on either side of the
walking belt for lifting of the base and two wheels
on either side of the front of the base beneath the
console. It is highly recommended that you do not
attempt to ever lift or move the treadmill without
help.
When you assemble the Nautilus® Sport Series
treadmill, you will need at least two people to set
the base in place, and lift the handlebar assembly.
6
ASSEMBLY GUIDE
pArtS liSt
Part : Base Frame Assembly
Qty: 1
Part : Right Upright Assembly
Qty: 1
P/N : 00 0-4785
Part : Lef t Upright Assembly
Qty: 1
P/N : 00 0-4786
Part : Top Plastic Motor Cover
Qty: 1
P/N : 00 0-4696
Part : Top Motor Cover Sticker (T518)
Qty: 1
P/N : 00 0-4827
Part : Top Motor Cover Sticker (T516)
Qty: 1
P/N : 00 0-4826
Part : Front Plastic Motor Cover
Qty: 1
P/N : 00 0-4695
Part : Lef t Upright Cap
Qty: 1
P/N : 00 0-4725
Part : Right Upright Cap
Qty: 1
P/N : 00 0-4724
Part : Front Motor Cover Sticker (T518)
Qty: 1
P/N : 00 0-4822
Part : Top Motor Cover Sticker (T514)
Qty: 1
P/N : 00 0-4810
Loading...