
MM54HC11/MM74HC11
Triple 3-Input AND Gate
MM54HC11/MM74HC11 Triple 3-Input AND Gate
January 1988
General Description
These AND gates utilize advanced silicon-gate CMOS technology to achieve operating speeds similar to LS-TTL gates
with the low power consumption of standard CMOS integrated circuits. All gates have buffered outputs, providing
high noise immunity and the ability to drive 10 LS-TTL loads.
The 54HC/74HC logic family is functionally as well as pinout compatible with the standard 54LS/74LS logic family.
All inputs are protected from damage due to static discharge by internal diode clamps to V
and ground.
CC
Connection and Logic Diagrams
Dual-In-Line Package
Top View
Order Number MM54HC11 or MM74HC11
Features
Y
Typical propagation delay: 12 ns
Y
Wide power supply range: 2 –6V
Y
Low quiescent current: 20 mA maximum (74HC Series)
Y
Low input current: 1 mA maximum
Y
Fanout of 10 LS-TTL loads
TL/F/5298– 1
(1 OF 3 GATES)
C
1995 National Semiconductor Corporation RRD-B30M105/Printed in U. S. A.
TL/F/5298
TL/F/5298– 2

Absolute Maximum Ratings (Notes1&2)
Operating Conditions
If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales
Office/Distributors for availability and specifications.
Supply Voltage (V
CC
)
DC Input Voltage (VIN)
DC Output Voltage (V
OUT
)
Clamp Diode Current (IIK,IOK)
DC Output Current, per pin (I
OUT
)
DC VCCor GND Current, per pin (ICC)
Storage Temperature Range (T
STG
b
b
)
b
0.5 toa7.0V
1.5 to V
CC
0.5 to V
CC
g
g
b
g
65§Ctoa150§C
a
1.5V
a
0.5V
20 mA
25 mA
50 mA
Power Dissipation (PD)
(Note 3) 600 mW
Supply Voltage (V
)26V
CC
DC Input or Output Voltage 0 V
(V
IN,VOUT
)
Operating Temp. Range (T
MM74HC
MM54HC
Input Rise or Fall Times
e
2.0V(tr,tf) 1000 ns
V
CC
e
V
4.5V 500 ns
CC
e
V
6.0V 400 ns
CC
S.O. Package only 500 mW
Lead Temperature (T
)
L
(Soldering 10 seconds) 260§C
DC Electrical Characteristics (Note 4)
Symbol Parameter Conditions V
CC
A
e
T
25§C
Typ Guaranteed Limits
V
IH
Minimum High Level 2.0V 1.5 1.5 1.5 V
Input Voltage 4.5V 3.15 3.15 3.15 V
6.0V 4.2 4.2 4.2 V
V
IL
Maximum Low Level 2.0V 0.5 0.5 0.5 V
Input Voltage** 4.5V 1.35 1.35 1.35 V
6.0V 1.8 1.8 1.8 V
V
OH
Minimum High Level V
Output Voltage
e
V
IN
IH
s
I
20 mA 2.0V 2.0 1.9 1.9 1.9 V
l
l
OUT
4.5V 4.5 4.4 4.4 4.4 V
6.0V 6.0 5.9 5.9 5.9 V
e
V
V
IN
IH
s
I
4.0 mA 4.5V 4.2 3.98 3.84 3.7 V
l
l
OUT
s
I
5.2 mA 6.0V 5.7 5.48 5.34 5.2 V
l
l
OUT
V
OL
Maximum Low Level V
Output Voltage
e
VIHor V
l
I
IN
OUT
IL
s
20 mA 2.0V 0 0.1 0.1 0.1 V
l
4.5V 0 0.1 0.1 0.1 V
6.0V 0 0.1 0.1 0.1 V
e
V
VIHor V
IN
I
l
OUT
I
l
OUT
I
IN
I
CC
Note 1: Absolute Maximum Ratings are those values beyond which damage to the device may occur.
Note 2: Unless otherwise specified all voltages are referenced to ground.
Note 3: Power Dissipation temperature derating Ð plastic ‘‘N’’ package:
Note 4: For a power supply of 5V
with this supply. Worst case V
I
**V
Maximum Input V
Current
Maximum Quiescent V
Supply Current I
g
and VILoccur at V
) occur for CMOS at the higher voltage and so the 6.0V values should be used.
OZ
limits are currently tested at 20% of VCC. The above VILspecification (30% of VCC) will be implemented no later than Q1, CY’89.
IL
IH
e
IN
e
IN
OUT
10% the worst case output voltages (VOH, and VOL) occur for HC at 4.5V. Thus the 4.5V values should be used when designing
IL
s
4.0 mA 4.5V 0.2 0.26 0.33 0.4 V
l
s
5.2 mA 6.0V 0.2 0.26 0.33 0.4 V
l
VCCor GND 6.0V
g
0.1
VCCor GND 6.0V 2.0 20 40 mA
e
0 mA
b
12 mW/§C from 65§Cto85§C; ceramic ‘‘J’’ package:b12 mW/§C from 100§Cto125§C.
e
5.5V and 4.5V respectively. (The VIHvalue at 5.5V is 3.85V.) The worst case leakage current (IIN,ICC, and
CC
74HC 54HC
eb
T
40 to 85§CT
A
g
1.0
Min Max Units
)
A
b
b
40
55
eb
A
55 to 125§C
g
a
a
1.0 mA
CC
85
125
V
C
§
C
§
Units
2

AC Electrical Characteristics V
CC
Symbol Parameter Conditions Typ
t
PHL,tPLH
Maximum Propagation 12 20 ns
Delay
AC Electrical Characteristics
e
V
2.0V to 6.0V, C
CC
Symbol Parameter Conditions V
t
PHL,tPLH
t
TLH,tTHL
C
PD
C
IN
Note 5: CPDdetermines the no load dynamic power consumption, P
Maximum Propagation 2.0V 48 125 156 190 ns
Delay 4.5V 18 25 31 38 ns
Maximum Output Rise 2.0V 30 75 95 110 ns
and Fall Time 4.5V 8 15 19 22 ns
Power Dissipation (per gate) 35 pF
Capacitance (Note 5)
Maximum Input 5 10 10 10 pF
Capacitance
e
L
50 pF, t
e
e
t
6 ns (unless otherwise specified)
r
f
e
5V, T
CC
e
A
T
25§C, C
Guaranteed
e
25§C
A
e
L
Limit
e
15 pF, t
e
t
6ns
r
f
Units
74HC 54HC
eb
T
40 to 85§CT
A
eb
A
55 to 125§C
Typ Guaranteed Limits
6.0V 15 21 27 31 ns
6.0V 7 13 16 19 ns
2
e
CPDV
D
faICCVCC, and the no load dynamic current consumption, I
CC
e
CPDVCCfaICC.
S
Units
3

Physical Dimensions inches (millimeters)
Order Number MM54HC11J or MM74HC11J
Dual-In Line Package (J)
See NS Package J14A
MM54HC11/MM74HC11 Triple 3-Input AND Gate
Dual-In Line Package (N)
Order Number MM74HC11N
LIFE SUPPORT POLICY
NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL
SEMICONDUCTOR CORPORATION. As used herein:
1. Life support devices or systems are devices or 2. A critical component is any component of a life
systems which, (a) are intended for surgical implant support device or system whose failure to perform can
into the body, or (b) support or sustain life, and whose be reasonably expected to cause the failure of the life
failure to perform, when properly used in accordance support device or system, or to affect its safety or
with instructions for use provided in the labeling, can effectiveness.
be reasonably expected to result in a significant injury
to the user.
See NS Package N14A
National Semiconductor National Semiconductor National Semiconductor National Semiconductor
Corporation Europe Hong Kong Ltd. Japan Ltd.
1111 West Bardin Road Fax: (
Arlington, TX 76017 Email: cnjwge@tevm2.nsc.com Ocean Centre, 5 Canton Rd. Fax: 81-043-299-2408
Tel: 1(800) 272-9959 Deutsch Tel: (
Fax: 1(800) 737-7018 English Tel: (
National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.
Fran3ais Tel: (
Italiano Tel: (
a
49) 0-180-530 85 86 13th Floor, Straight Block, Tel: 81-043-299-2309
a
49) 0-180-530 85 85 Tsimshatsui, Kowloon
a
49) 0-180-532 78 32 Hong Kong
a
49) 0-180-532 93 58 Tel: (852) 2737-1600
a
49) 0-180-534 16 80 Fax: (852) 2736-9960