Nascom N135WGSW-ST, N135WGB-SWFB, N135WGT-SW, N135WGT-ST, N135WGW-SWSD Specsheet
...
N135WG
3/8” STICK ON CONTACT SET, CENTER LEADS
DESCRIPTION
Nascom’s N35WG Series, 3/8” stick on contact, protects all nonferrous (e.g.
wood, aluminum and vinyl) doors and windows, in both residential and commercial settings.
The N35WG is the installer’s choice of contact conguration where excellent
air and side-to-side gap are required to prevent false alarms caused by shifting or warping doors and windows.
FEATURES
• 12” 22AWG WIRE LEADS • ENCAPSULATED HERMETICALLY SEALED CONTACTS
• WIDE GAP - N35 NdFeB RARE EARTH MAGNET • 3M VHB (Very High Bond) DOUBLE SIDED TAPE
• LISTED TO UL634 STANDARD • ABS HOUSINGS
ORDERING INFORMATION
CONTACT RATING
PART
NUMBER
COLOR
OPERATE
GAP
(in inches)
(Max DC/Peak AC Resistive)
SWITCHING CARRY
V I V I
CLOSED LOOP, NORMALLY OPEN, 1FA, SWITCH/MAGNET SET:
N135WGSW/ST
N135WGB/ST
N135WGG/ST
N135WGT/ST
N135WGW/ST
SNOW WHITE
BROWN
GREY
TAN
WHITE
0.75 to 1.125 200 VDC 0.5 Amps 10vA 1.5 Amps 150 mOhms
DUAL CLOSED LOOP, NORMALLY OPEN, 1FA, SWITCH/MAGNET SET:
N135WGSW/ST2CR
N135WGB/ST2CR
N135WGG/ST2CR
N135WGT/ST2CR
N135WGW/ST2CR
SNOW WHITE
BROWN
GREY
TAN
WHITE
0.75 to 1.125 200 VDC 0.5 Amps 10vA 1.5 Amps 150 mOhms
OPEN LOOP, NORMALLY CLOSED, 1FB, SWITCH/MAGNET SET:
N135WGSW/STFB
N135WGB/STFB
N135WGG/STFB
N135WGT/STFB
N135WGW/STFB
SNOW WHITE
BROWN
GREY
TAN
WHITE
0.65 to 1.00
30 VDC 0.2 Amps 3vA 0.5 Amps 100 mOhms
SINGLE POLE DOUBLE THROW, SWITCH/MAGNET SET:
N135WGSW/STSD
N135WGB/STSD
N135WGG/STSD
N135WGT/STSD
N135WGW/STSD
SNOW WHITE
BROWN
GREY
TAN
WHITE
0.65 to 1.00
30 VDC 0.2 Amps 3vA 0.5 Amps 100 mOhms
HIGH SECURITY, NORMALLY OPEN, 1FA, SWITCH/MAGNET SET:
N135WGSW/STHS
N135WGB/STHS
N135WGG/STHS
N135WGT/STHS
N135WGW/STHS
SNOW WHITE
BROWN
GREY
TAN
WHITE
0.1875 to
0.5000
300 VDC
0.25
Amps
Royne Industries LLC, dba NASCOM
|
P: 800.843.5530
|
F: 800.727.4041
10vA
0.25
Amps
|
STATIC
CONTACT
RESISTANCE
(50mV, 100mA)
150 mOhms
initial
DWG No. 131118-06 Rev. 1
www.nascominc.com
1
.313
7.95
.045
1.14
3M VBH TAPE
.350
8.89
1.375
34.93
12.000
304.80
END VIEW
TOP VIEW
.313
7.95
.045
1.14
3M VBH TAPE
1.375
34.93
.350
8.89
END VIEW
TOP VIEW
WIRING SCHEMATIC
N135WG
3/8” STICK ON CONTACT SET, CENTER LEADS
SWITCH
CONTACT
CLOSED LOOP,
NORMALLY OPEN CONTACT
DUAL CLOSED LOOP,
NORMALLY OPEN CONTACTS
DIMENSIONS - IN [mm]
SWITCH
CONTACT
OPEN LOOP,
NORMALLY CLOSED CONTACT
NC, OPEN LOOP (WHITE)
COMMON
(BROWN)
SPDT, SINGLE POLE DOUBLE THROW
NO, CLOSED LOOP (RED)
SWITCH
MAGNET
INSTALLATION INSTRUCTIONS
• Pre-t the switch and magnet in the desired location on the window.
• Clean the mounting surface area for both switch and magnet with alcohol and let dry.
• Remove the liner from the tape on the back of the switch and carefully position the switch on the window frame as close
as possible to the movable part of the window.
• Remove the liner from the tape on the back of the magnet and carefully align the magnet parallel with the switch on the
movable part of the window and as close to the window frame as possible.
• Apply rm pressure to the switch and magnet housing to ensure proper adhesion to the mounting surface.
• Connect the switch leads to the alarm system circuit. Caution! Hold wire leads, not the switch housing while cutting and
stripping to prevent damage to switch.
• Test alarm system for correct operation.
Royne Industries LLC, dba NASCOM
|
P: 800.843.5530
|
F: 800.727.4041
|
www.nascominc.com
DWG No. 131118-06 Rev. 1
2
Loading...