Murata Type1GC, Type1PS Quick Start Guide

Type1GC/1PS Evaluation Board AT Command (USB) Quick Start Guide

Type1GC Evaluation Board

AT Command (USB)

Quick Start Guide

Document No. N3-0663

Document Number: N3-0663
Version: E
Release Date: 2021/03/25

Murata Manufacturing Co., Ltd.

Page 1

Type1GC/1PS Evaluation Board AT Command (USB) Quick Start Guide

Page 2

Revision History

Revision Number

Release Date

Comments

Revision A

2020/03/31

Initial

Revision B

2020/06/11

Change Chapter 4 image

Revision C

2020/06/30

Added description of UART usage

1.1 Purpose and Scope

Revision D

2020/07/28

Change to the USB procedure

1.1Purpose and Scope
3 Prerequisites

In this guide, it is assumed that you have applied the patch file
provided by Murata Manufacturing to the WICED SDK. If it has not
been applied, check the Type1GC/1PS Evaluation Board Quick
Start Guide and apply the patch file.

Building a Demo Application

5 Running AT command Application

Revision E

2021/03/25

Update for .patch platform file

Type1GC/1PS Evaluation Board AT Command (USB) Quick Start Guide

Page 3

Contents

1. About this Document ................................................................................................................. 4

1.1. Purpose and Scope .................................................................................................................. 4

1.2. Document Conventions ............................................................................................................ 4

2. Evaluation Board ....................................................................................................................... 5

3. Prerequisites ............................................................................................................................. 6

4. Setting up the WICED Studio and Building a Demo Application ..................................................... 6

5. Running AT command Application ............................................................................................ 11

Type1GC/1PS Evaluation Board AT Command (USB) Quick Start Guide

Page 4

1. About this Document

1.1. Purpose and Scope

This document provides instructions to evaluate an AT command sample application on the Murata
Type1GC EVB. Although Type1GC is supported by WICED-SDK, some modifications will be required when
using our EVB. We provice the modification as a “platform file” and AT command sample application
source code.

Note: Type1GC and 1PS is pin-to-pin compatible module.
For example, in the case of Type1PS, please use Type1PS platform files and module name 1PS instead of
1GC.

1.2. Document Conventions

Platform file – the source code to configure each platform.

Type1GC

Tera Term

USB

(For AT commands)

UART1

(For debug)