MURATA Ceramic Resonators User Manual

Murata
Manufacturing Co., Ltd.

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

!Note

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Ceramic Resonators
(CERALOCKr)

P16E.pdf

08.3.3

Cat.No.P16E-18

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

!Note

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

!Note

sales representatives or product engineers before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

P16E.pdf

08.3.3

for EU RoHS Compliant

• All the products in this catalog comply with EU RoHS.

• EU RoHS is "the European Directive 2002/95/EC on the Restriction of the Use
of Certain Hazardous Substances in Electrical and Electronic Equipment".

• For more details, please refer to our website 'Murata's Approach for EU RoHS'
(http://www.murata.com/info/rohs.html).

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

!Note

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

!Note

sales representatives or product engineers before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

P16E.pdf

08.3.3

CONTENTS

CERALOCKr and "CERALOCK" in this catalog are
the trademarks of Murata Manufacturing Co., Ltd.

Selection Guide 2
Part Numbering 3

1

MHz Chip Type -Tight Frequency Tolerance for Automotive- 4

Application Circuits Utilization 6

2

MHz Chip Type -Standard Frequency Tolerance for Automotive- 7

Application Circuits Utilization 11

MHz Chip Type Notice (Soldering and Mounting) for Automotive 12
MHz Chip Type Notice for Automotive 13
MHz Chip Type Packaging for Automotive 14

1

2

3

4

3

MHz Chip Type -Tight Frequency Tolerance for General Usage- 16

Application Circuits Utilization 20

4

MHz Chip Type -Standard Frequency Tolerance for General Usage- 21

Application Circuits Utilization 26

5

MHz Lead Type -Standard Frequency Tolerance for General Usage- 28

6

kHz Chip Type -Standard Frequency Tolerance for General Usage- 30

7

kHz Lead Type -Standard Frequency Tolerance for General Usage- 32

MHz Chip Type Notice (Soldering and Mounting) for General Usage 34
MHz Chip Type Notice for General Usage 38
MHz Lead Type Notice for General Usage 39
kHz Type Notice for General Usage 40

5

6

7

MHz Chip Type Packaging for General Usage 43
MHz Lead Type Packaging for General Usage 46
kHz Type Packaging for General Usage 49

Recycled Paper

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

!Note

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

!Note

sales representatives or product engineers before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Selection Guide

Start

Applications

Consumer Automotive

FunctionsFunctions

P16E.pdf

08.3.3

High Speed USB

(high-precision)

SMD

CSTCE_XT

pppp

24.00–27.20
/30.00MHz

Full Speed USB

(high-precision)

CSTCR_G15L

CSTCE_G15L

12.00MHz

CSTCE_V13L

16.00MHz

pp

6.00MHz

pp

pp

Card

(small, low-profile)

CSTCE_G

8.00–13.99MHz

CSTCE_V

14.00–20.00MHz

CSTCG_V

20.00–33.86MHz

CSBFB_J

430–519kHz

CSBFB_J

700–1250kHz

kHz

General Usage

Frequencies

CSBLA_E

375–429kHz

CSBLA_E

430–509kHz

CSBLA_E

510–699kHz

CSTCC_G

2.00–3.99MHz

CSTCR_G

4.00–7.99MHz

CSTCE_G

8.00–13.99MHz

MHz

CSTLS_G

3.40–10.00MHz

CSTLS_X

16.00–70.00MHz

CSALS_X

16.00–70.00MHz
(Two Terminals)

(high-precision)

Other

Automotive Usage

CSTCC_G_A

2.00–3.99MHz

CSTCR_G_B

4.00–7.99MHz

CSTCE_G_A

8.00–13.99MHz

Automotive

Network

SMDSMDSMDSMD LeadedSMDLeadedSMD

CSTCR_G15C

4.00–7.99MHz

CSTCE_G15C

8.00–13.99MHz

CSTCE_V13C

14.00–20.00MHz

pp

pp

pp

CSTCW_X11

CSTCZ_X12R

Notice) "CERALOCKr for general usage" and "CERALOCKr for automotive" is different in the specification of Operating Temperature Range, Environmental Characteristics,
Physical Characteristics and so on. Please choose either "for general usage" or "for automotive" according to the required specification.

24.00MHz

48.00MHz

ppp

CSTCW_X_M

25.00–48.00MHz

pp

CSBLA_J

700–1250kHz

The kHz resonators have
only two terminals.

CSTCE_V

14.00–20.00MHz

CSTCW_X

20.01–70.00MHz

CSACW_X

20.01–70.00MHz
(Two Terminals)

CSTCE_V_C

14.00–20.00MHz

CSTCV_X_Q

20.01–70.00MHz

CSACV_X_Q

20.01–70.00MHz
(Two Terminals)

p

: Alphanumerics express individual specification

2

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

!Note

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

!Note

sales representatives or product engineers before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

o Part Numbering

CERALOCKr (MHz)

P16E.pdf

08.3.3

(Part Number)

CS

CE

T

w

q

16M0

e

r

tVy5u

***

3

i

qProduct ID

Product ID

CS Ceramic Resonators

wFrequency/Capacitance

Code

A
T

Frequency/Capacitance

MHz No capacitance built-in

MHz Built-in Capacitance

eStructure/Size

Code

LS
CC

CR/CE/CG

CV

CW/CZ

Structure/Size

Round Lead Type

Cap Chip Type
Small-cap Chip Type
Monolithic Chip Type

Small Monolithic Chip Type

rNominal Center Frequency
Expressed by four-digit alphanumerics. The unit is in hertz (Hz).

Decimal point is expressed by capital letter "M".

tDesign

Code

Gpp

T/Vpp

Xpp

pp indicates initial frequency tolerance and load capacity.

Thickness Expander mode

Thickness Expander mode (3rd overtone)

Design

Thickness Shear mode

CERALOCKr (kHz)

-R0

o

yInitial Frequency Tolerance

Code

5
3
2
1
H
K

Design

±0.5%
±0.3%
±0.2%
±0.1%

±0.07%

-0.025/0.02%

uLoad Capacity

Code

1
2
3
4
5
6

Design

3/5/6pF

10pF
15pF
22pF

30/33/39pF

47pF

iIndividual Specification

Code

***

With standard products, "iIndividual Specification" is omitted, and
"oPackaging" is carried up.

Individual Specification

Three-digit alphanumerics express
"Individual Specification".

oPackaging

Code

-B0

-A0

-R0

-R1

Radial taping is applied to lead type and plastic taping to chip type.

Packaging

Bulk

Radial Taping H

=18mm

0

Plastic Taping ø=180mm
Plastic Taping ø=330mm

(Part Number)

CS

q

FB

B

w

e

500KtJ58

r

***

y

-R1

u

qProduct ID

Product ID

CS Ceramic Resonators Epp

wFrequency/Capacitance

Code

Frequency/Capacitance

B kHz No capacitance built-in

eStructure/Size

Code

LA
FB

Structure/Size

Two-Terminal Lead Type

SMD Type

rNominal Center Frequency
Expressed by four-digit alphanumerics. The unit is in hertz (Hz).

Capital letter "K" following three figures expresses the unit of
"kHz". In case of 1.0MHz (1000kHz) or above, expressed by
three figures and capital letter "M" for decimal point.

tDesign

Code

Design

Area Expansion mode

Jpp

pp indicates initial frequency tolerance and load capacitance.

Area Expansion mode (Closed Type)

yIndividual Specification

Code

***

With standard products, "yIndividual Specification" is omitted, and
"uPackaging" is carried up.

Individual Specification

Three-digit alphanumerics express
"Individual Specification".

uPackaging

Code

-B0

-R1

Packaging

Bulk

Plastic Taping ø=330mm

3

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

!Note

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

!Note

sales representatives or product engineers before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

P16E.pdf

08.3.3

1

Ceramic Resonators (CERALOCKr)

MHz Chip Type -Tight Frequency Tolerance for Automotive-

4.5±0.1

Chip type "CERALOCK" with built-in load capacitors in
an extremely small package provides high accuracy.
MURATA's frequency adjustment and package technology
expertise has enabled the development of the chip
"CERALOCK" with built-in load capacitors.
Chip "CERALOCK" for automotive has achieved importance
in the worldwide automotive market. This diverse
series owes its development to MURATA's original mass
production techniques and high reliability.

■ Features

1. The series are high accuracy resonators whose total
tolerance is available for less than +-3,000ppm.

2. The series has high reliability and is available
for wide temperature range.

3. Oscillation circuits do not require external load
capacitors.

4. The series is available for a wide temperature range.

5. The resonators are extremely small and have a low
profile.

6. No adjustment is necessary for oscillation circuits.

■ Applications

1. Cluster panel and Control panel

2. Safety control
(Anti-lock Brake System, Electronic Stability
Control, Airbag, etc.)

3. Engine ECU, Electronic Power Steering, Immobilizer,
etc.

4. Car Air-conditioner, Power window, Remote Keyless
Entry system, etc.

5. Intelligent Transportation System
(Lane Keeping System, Millimeter wave radar, etc.)

6. Battery control for hybrid car

CSTCR_G15C

4.00-7.99MHz

CSTCE_G15C

8.00-13.99MHz

CSTCE_V13C

14.00-20.00MHz

0.30±0.20

0.2±0.2

0.4 (ref.)

(3) (2) (1)

0.4±0.1 0.4±0.1

0.75±0.1 1.5±0.1 1.5±0.1

0.10±0.10

0.1±0.1

0.50 (ref.)

0.4±0.1

0.4±0.1 1.2±0.1 1.2±0.1

3.2±0.15

0.10±0.10

0.1±0.1

3.0 max.

0.5 (ref.) 0.5 (ref.)

0.4±0.1

0.5 (ref.)

0.4±0.1

1.2±0.1 1.2±0.1

∗

4.1 max.

0.4 (ref.)

0.4±0.1

3.2±0.15

∗

3.0 max.

0.50 (ref.)
(1)(2)(3)

0.4±0.1 0.4±0.1

∗

(1)(2)(3)

0.4±0.10.4±0.1

0.4 (ref.)

1.3±0.15

0.50 (ref.)

1.3±0.15

0.9±0.1

2.0±0.1

1.1±0.1

0.70±0.10

1.1 max.

0.4±0.1

1.4 max.

0.6±0.05

: EIAJ Monthly

∗

Code

1.1 max.

0.4±0.1

: EIAJ Monthly

∗

Code

(in mm)

(in mm)

(in mm)

Part Number

Oscillating
Frequency

(MHz)

Initial

Tolerance

Temp. Stability

(%)

Temperature

Range

(°C)

CSTCR_G15C 4.00 to 7.99 ±0.1% ±0.13 -40 to 125

CSTCE_G15C 8.00 to 13.99 ±0.1% ±0.13 -40 to 125

CSTCE_V13C 14.00 to 20.00 ±0.1% ±0.13 -40 to 125

Irregular or stop oscillation may occur under unmatched circuit conditions. Please check the actual conditions prior to use.

4

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

!Note

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

!Note

sales representatives or product engineers before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

P16E.pdf

08.3.3

■ Oscillation Frequency Measuring Circuit

VDD

5pF

Rf

Rd

(1) (3)

C1 C2

(2)

To Frequency Counter

1MΩ

■ Standard Land Pattern Dimensions

CSTCR_G15C

0.4

2.6

0.4

1.1

0.41.1

0.4

1.90 ~ 2.10

CSTCE_G15C

0.4 0.40.8

0.8

1

0.4

1.90 ~ 2.10

1.5 1.5

CSTCE_V13C

0.4 0.40.8

0.8

1.2 1.2

CSTCE_G15C

Land Pattern

Land Pattern

(in mm)

(in mm)

1.2 1.2
Land Pattern

■ Oscillation Frequency Temperature Stability

CSTCR_G15C

+0.2

+0.1

0

-0.1

Oscillating Frequency Shift (%)

-0.2

-60 -40 -20 0 +20 +40 +60 +80 +100 +120 +140
Temperature (°C)

CSTCE_V13C

(in mm)

+0.2

+0.1

0

-0.1

Oscillating Frequency Shift (%)

-0.2

-60 -40 -20 0 +20 +40 +60 +80 +100 +120 +140
Temperature (°C)

+0.2

+0.1

0

-0.1

Oscillating Frequency Shift (%)

-0.2

-60 -40 -20 0 +20 +40 +60 +80 +100 +120 +140
Temperature (°C)

5

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

!Note

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

!Note

sales representatives or product engineers before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

P16E.pdf

08.3.3

1

Application Circuits Utilization

■ TMP92CD54IF (Toshiba)

Vcc3=3.3V

0.1µF

H1

74 72 L

CERALOCKr

C1

■ MC68HC908AZ60AVFU (Freescale)

Vdd=5.0V

16-bit Microcomputer

Vcc5=5.0V

H2

IC : TMP92CD54IF

V2V1

C2

8-bit Microcomputer

H1: 36, 68, 86
H2: 2, 4, 15, 40, 50, 61, 75
L: 1, 3, 13, 38, 51, 63, 73, 88

CERALOCKr: CSTCE10M0G15Cpp-R0

C1=33pF (Typ.)
C2=33pF (Typ.)

■ MB90F387 (Fujitsu)

Vcc=5.0V

H

28 27 L26

CERALOCKr

C1

16-bit Microcomputer

IC : MB90F387

0.1µF

V2V1

C2

H: 1, 2, 21, 22, 24
L: 20, 23, 25, 48

CERALOCKr: CSTCE8M00G15Cpp-R0

■ ST72F561 (HS) (ST Microelectronics)

Vdd=5.0V

8-bit Microcomputer

C1=33pF (Typ.)
C2=33pF (Typ.)

EVALUATION BOARD

IC : MC68HC908AZ60AVFU

59 58 GND

1MΩ

CERALOCKr

V2V1

C1

C2

CERALOCKr: CSTCE16M0V13C-R0

■ uPD70F3283YGC (NEC Electronics)

Vdd=3.3V

10kΩ

H 14

12 13 L10

CERALOCKr

C1

32-bit Microcomputer

IC : µPD70F3283YGC

4.7µF

V2V1

C2

H: 1, 5, 9, 34, 70
L: 2, 8, 11, 15, 33, 69

CERALOCKr: CSTCE10M0G15Cpp-R0

C1=15pF (Typ.)
C2=15pF (Typ.)

C1=33pF (Typ.)
C2=33pF (Typ.)

H 60

IC : ST72F561 (HS)

1 2 L

CERALOCKr

C1

V2V1

C2

H: 9, 25, 41, 57, 58
L: 8, 24, 40, 55, 56

CERALOCKr: CSTCE8M00G15App-R0

■ M30842MCT-XXXGP (Renesas)

Vcc=5.0V

H 19

IC : M30842MCT-XXXGP (High*)

22 20 L

CERALOCKr

C1

16-bit Microcomputer

V2V1

C2

H: 23, 24, 37, 39, 59, 74, 91, 118, 122,
132, 142, 143
L: 15, 16, 21, 36, 41, 57, 76, 93,
110~113, 120, 121, 130, 140

*High: XIN-XOUT Drive Capacity Select Bit

CERALOCKr: CSTCE8M00G15Cpp-R0

C1=33pF (Typ.)
C2=33pF (Typ.)

C1=33pF (Typ.)
C2=33pF (Typ.)

6

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

!Note

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

!Note

sales representatives or product engineers before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Ceramic Resonators (CERALOCKr)

MHz Chip Type -Standard Frequency Tolerance for Automotive-

7.2±0.2

Chip type "CERALOCK" with built-in load capacitors in
an extremely small package provides high accuracy.
MURATA's frequency adjustment and package technology
expertise has enabled the development of the chip
"CERALOCK" with built-in load capacitors.
Chip "CERALOCK" for automotive has achieved importance
in the worldwide automotive market. This diverse
series owes its development to MURATA's original mass
production techniques and high reliability.

■ Features

1. The series has high reliability and is available
for wide temperature range.

2. Oscillation circuits do not require external load
capacitors.

3. The series is available in a wide frequency range.

4. The resonators are extremely small and have a low
profile.

5. No adjustment is necessary for oscillation circuits.

CSTCC_G_A

2.00-3.99MHz

0.45±0.3

0.3±0.3

0.45

(Ref.)

(3) (2) (1)

1.2±0.2

2.5±0.1 2.5±0.1

1.1±0.1

0.3±0.2

0.2±0.2

0.8±0.1

6.6 max.

0.45

(Ref.)

1.4±0.2 1.2±0.2

∗

0.45

(Ref.)

4.5±0.1

∗

(2) (1)(3)

4.1 max.

0.4 (ref.)0.4 (ref.)0.4 (ref.)

0.8±0.1 0.8±0.1

3.0±0.2

2.1 max.

0.5±0.05

t

t : 1.75±0.05
(2.00—2.99MHz)
t : 1.55±0.05
(3.00MHz—)

∗ : EIAJ code

2.0±0.1

0.4±0.05

∗ : EIAJ Monthly
Code

1.15±0.05

P16E.pdf

08.3.3

2

(in mm)

1.4 max.

■ Applications

1. Cluster panel and Control panel

2. Safety control
(Anti-lock Brake System, Electronic Stability
Control, Airbag, etc.)

3. Engine ECU, Electronic Power Steering, Immobilizer,
etc.

4. Car Air-conditioner, Power Window, Remote Keyless
Entry system, etc.

5. Electronic Toll Collection system, Car Navigation,
etc.

3.2±0.15

∗

1.3±0.15

1.1 max.

0.4±0.1

0.9±0.1

: EIAJ Monthly

∗

Code

CSTCE_V_C

14.00-20.00MHz

0.10±0.10

0.1±0.1

3.0 max.

0.5 (ref.) 0.5 (ref.)

0.4±0.1

0.5 (ref.)

0.4±0.1

1.2±0.1 1.2±0.1

(1)(2)(3)

0.4±0.10.4±0.1

(in mm)

CSTCR_G_B

4.00-7.99MHz

CSTCE_G_A

8.00-13.99MHz

CSACV_X_Q

20.01-70.00MHz

0.4±0.1 0.4±0.1 0.4±0.1

0.75±0.1 1.5±0.1 1.5±0.1

3.2±0.15

0.10±0.10

0.1±0.1

3.0 max.

0.50 (ref.)

0.4±0.1

0.4±0.1 0.4±0.1

0.4±0.1 1.2±0.1 1.2±0.1

3.7±0.2

M

∗

(0.5)

(3)

0.4±0.2

0.5 0.50.5

1.85±0.3

1.6±0.2

(0.5)

(2)

1.6±0.2

(0.5)

(1)

0.4±0.20.5±0.2

∗

1.3±0.15

1.1 max.

0.4±0.1

0.70±0.10

0.50 (ref.)

0.50 (ref.)
(1)(2)(3)

1.3±0.1

3.1±0.2

Terminals (1) and (3) are
interchangeable.
Terminal (2) should be soldered
only to fix the resonator onto P.C.B.
Terminal (2) should be electrically
floating so it cannot be connected
anywhere.

Thickness varies
with frequency.

: EIAJ Monthly Code

∗

(in mm)

(in mm)

(in mm)

Continued on the following page.

7

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

!Note

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

!Note

sales representatives or product engineers before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Continued from the preceding page.

3.7±0.2

M

∗

1.3±0.1

3.1±0.2

P16E.pdf

08.3.3

(0.7)

(3)

0.4±0.2

0.5 0.50.5

2

CSTCV_X_Q

20.01-70.00MHz

1.85±0.3

Part Number

CSTCC_G_A 2.00 to 3.99 ±0.5%

Oscillating
Frequency

(MHz)

1.6±0.2

(0.9)

(2)

1.6±0.2

(0.7)

(1)

0.4±0.20.5±0.2

Initial

Tolerance

Thickness varies
with frequency and
built-in capacitance.
*: EIAJ code

(in mm)

Temp. Stability

(%)

±0.4

[-0.6% to +0.3%:Built-in Capacitance 47pF type within Freq.2.00 to 3.49MHz]

Temperature

Range

(°C)

-40 to 125

CSTCR_G_B 4.00 to 7.99 ±0.5% ±0.15 -40 to 125

CSTCE_G_A 8.00 to 13.99 ±0.5% ±0.2 -40 to 125

CSTCE_V_C 14.00 to 20.00 ±0.5% ±0.15 -40 to 125

CSACV_X_Q 20.01 to 70.00 ±0.5% ±0.3 -40 to 125

CSTCV_X_Q 20.01 to 70.00 ±0.5% ±0.3 -40 to 125

Irregular or stop oscillation may occur under unmatched circuit conditions. Please check the actual conditions prior to use.

■ Oscillation Frequency Measuring Circuit

CSTCC_G_A

VDD

Rf

(1) (3)

C1 C2

(2)

CSACV_X_Q

22µF

0.01µF

VDD

+

To Frequency counter

Rd

CSTCE_G_A/CSTCE_V_C/CSTCR_G_B/CSTCV_X_Q

(1) (3)

C1 C2

VDD

5pF

Rf

Rd

(2)

To Frequency Counter

1MΩ

Rf

CL1 CL2

To Frequency Counter

8

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

!Note

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

!Note

sales representatives or product engineers before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

■ Standard Land Pattern Dimensions

CSTCC_G_A

CSTCR_G_B

0.8

0.8 0.8

0.70.7

P16E.pdf

08.3.3

3.8~4.4

0.4

1.90 ~ 2.10

1.2 1.2

1.4

2.5 2.5

CSTCE_G_A

0.4 0.40.8

0.8

1.2 1.2

1.2 1.2

Land Pattern

Land Pattern

(in mm)

(in mm)

2.6

1.6

2

0.4

0.4 0.4

1.5 1.5

Land Pattern

(in mm)

CSTCE_V_C

0.4

1.90 ~ 2.10

0.4 0.40.8

0.8

1.2 1.2
Land Pattern

(in mm)

CSTCV_X_Q

0.5 1.1 0.5 1.1 0.5

1.0

0.50.5

1.0

1.6 1.6

3.1±0.2

Land Pattern

(in mm)

CSACV_X_Q

0.5 1.1 0.5 1.1 0.5

1.0

0.5

1.0

0.5

1.6 1.6

3.1±0.2

Land Pattern

(in mm)

9

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

!Note

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

!Note

sales representatives or product engineers before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

■ Oscillation Frequency Temperature Stability

CSTCC_G_A

CSTCR_G_B

P16E.pdf

08.3.3

+0.2

+0.1

2

0

-0.1

Oscillating Frequency Shift (%)

-0.2

-60 -40 -20 0 +20 +40 +60 +80 +100 +120 +140
Temperature (°C)

CSTCE_G_A

+0.2

+0.1

0

-0.1

Oscillating Frequency Shift (%)

+0.2

+0.1

0

-0.1

Oscillating Frequency Shift (%)

-0.2

-60 -40 -20 0 +20 +40 +60 +80 +100 +120 +140
Temperature (°C)

CSTCE_V_C

+0.2

+0.1

0

-0.1

Oscillating Frequency Shift (%)

-0.2

-60 -40 -20 0 +20 +40 +60 +80 +100 +120 +140
Temperature (°C)

CSTCV_X_Q

+0.2

+0.1

0

-0.1

Oscillating Frequency Shift (%)

-0.2

-60 -40 -20 0 +20 +40 +60 +80 +100 +120 +140
Temperature (°C)

-0.2

-60 -40 -20 0 +20 +40 +60 +80 +100 +120 +140
Temperature (°C)

CSACV_X_Q

+0.2

+0.1

0

-0.1

Oscillating Frequency Shift (%)

-0.2

-60 -40 -20 0 +20 +40 +60 +80 +100 +120 +140
Temperature (°C)

10

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

!Note

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

!Note

sales representatives or product engineers before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Application Circuits Utilization

P16E.pdf

08.3.3

■ uPD78F9222MC-5A4 (NEC Electronics)

Vdd=5.0V

H

IC : µPD78F9222MC-5A4

2 3

CERALOCKr

C1

8-bit Microcomputer

V'dd=7.0V

10kΩ

6

L8

V2V1

C2

H: 5, 20
L: 1

CERALOCKr: CSTCR6M00G55B-R0

C1=39pF (Typ.)
C2=39pF (Typ.)

■ MB90F347D (Fujitsu)

Vcc=5.0V

H

93 92 L

CERALOCKr

C1

16-bit Microcomputer

IC : MB90F347D

V2V1

C2

H: 15, 32, 65, 90
L: 16, 35, 44, 66, 91

CERALOCKr: CSTCE8M00G55A-R0

C1=33pF (Typ.)
C2=33pF (Typ.)

■ M30260F8AGP (Renesas)

Vcc=5.0V

H 7

IC : M30260F8AGP (High*)

23 24 L

CERALOCKr

C1

16-bit Microcomputer

V2V1

C2

H: 11, 46, 47, 48
L: 4, 9, 44

*High: XIN-XOUT Drive Capacity Select Bit

CERALOCKr: CSTCE10M0G55A-R0

■ MC68HC908AZ60AVFU (Freescale)

Vdd=5.0V

EVALUATION BOARD

IC : MC68HC908AZ60AVFU

59 58 GND

CERALOCKr

C1

8-bit Microcomputer

1MΩ

V2V1

C2

CERALOCKr: CSTCE16M0V53C-R0

C1=33pF (Typ.)
C2=33pF (Typ.)

C1=15pF (Typ.)
C2=15pF (Typ.)

2

■ ST72F324J6T3 (MS) (ST Microelectronics)

Vdd=5.0V

H

IC : ST72F324J6T3 (MS)

42 41 L

CERALOCKr

C1

8-bit Microcomputer

V2V1

C2

H: 13, 21, 32, 43
L: 14, 22, 33, 39, 40

CERALOCKr: CSTCR4M00G55B-R0

C1=39pF (Typ.)
C2=39pF (Typ.)

■ PIC12F675-I/P (HS) (Microchip)

Vdd=5.0V

H

IC : PIC12F675-I/P(HS)

2 3 L

CERALOCKr

C1

8-bit Microcomputer

1MΩ

V2V1

C2

H: 1
L: 4, 8

CERALOCKr: CSTCE8M00G52A-R0

C1=10pF (Typ.)
C2=10pF (Typ.)

11

One heat stress, shown in the profile at right, is applied to
resonator; then, after being placed in natural conditions
for 1 hour, the resonator is measured.
(a) Pre-heating conditions should be +150 to +180°C for

60 to 120 seconds. Ascending time up to +150°C
should be longer than 30 seconds.

(b) Heating conditions should be within 40 seconds at

+230°C min., but peak temperature should be Iower
than +260°C.

1. Soldering Conditions

(1) Reflow

HCFC, Isopropanol, Tap water, Demineralized water,
Cleanthrough750H, Pine alpha 100S, Techno care FRW

2. Wash

3. Notice for Mounting

(1) Cleaning Solvents

dT<=60°C (dT=Component-solvent)
*1 ex. In case the component at +90°C immerses into
cleaning solvent at +60°C, then dT=30°C.

(2) Temperature Difference : dT *1

5 minutes max. by air blow at +80°C max.

(4) Drying

(a) Total washing time should be within 10 minutes.
(b) The component may be damaged if it is washed with

chlorine, petroleum, or alkali cleaning solvent.

(a) The component is recommended for use with

placement machines which employ optical placement
capabilities. The component might be damaged by
excessive mechanical force. Please make sure to
evaluate by using placement machines before going
into mass production. Do not use placement
machines which utilize mechanical positioning. Please
contact Murata for details beforehand.

(b) Please insure the component is thoroughly evaluated

in your application circuit.

(c) Please do not apply excess mechanical stress to the

component and terminals during soldering.

(5) Others

(a) Ultrasonic Wash

1 minute max. in above solvent at +60°C max.
(Frequency: 28kHz, Output: 20W/l)

(b) Immersion Wash

5 minutes max. in above solvent at +60°C max.

(c) Shower or Rinse Wash

5 minutes max. in above solvent at +60°C max.

(3) Conditions

Components shall be measured after soldering on PCB
at +350±5°C for 3.0±0.5 seconds and leaving in natural
condition for 24 hours. The soldering iron shall not touch
the components while soldering.

(2) Soldering Iron

150

230
180

30 sec.

min.

40 sec.

max.

Peak

(260˚C max.)

Pre-heating

(150-180˚C)

Heating
(230˚C)

Gradual
Cooling

120 sec.

min.

60-120 sec.

Temperature (˚C)

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

!Note

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

!Note

sales representatives or product engineers before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

MHz Chip Type Notice (Soldering and Mounting) for Automotive

■ CSTCC/CSTCR/CSTCE_V/CSTCE_G/CSTCV/CSACV Series

2

P16E.pdf

08.3.3

12

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

!Note

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

!Note

sales representatives or product engineers before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

MHz Chip Type Notice for Automotive

■ Notice (Storage and Operating Conditions)

1. Product Storage Condition
Please store the products in room where the
temperature/humidity is stable. And avoid
such places where there are large temperature
changes. Please store the products under the
following conditions:
Temperature: -10 to + 40 degrees C
Humidity: 15 to 85% R.H.

2. Expire Date on Storage
Expire date (Shelf life) of the products is six
months after delivery under the conditions of a
sealed and an unopened package. Please use the
products within six months after delivery. If you
store the products for a long time (more than six
months), use carefully because the products may
be degraded in the solderability and/or rusty.
Please confirm solderability and characteristics
for the products regularly.

3. Notice on Product Storage
(1) Please do not store the products in a chemical
atmosphere (Acids, Alkali, Bases, Organic gas,
Sulfides and so on), because the characteristics
may be reduced in quality, and/or be degraded in
the solderability due to the storage in a
chemical atmosphere.

(2) Please do not put the products directly on the
floor without anything under them to avoid damp
places and/or dusty places.
(3) Please do not store the products in the places
such as: in a damp heated place, in a place where
direct sunlight comes in, in place applying
vibrations.
(4) Please use the products immediately after the
package is opened, because the characteristics
may be reduced in quality, and/or be degraded in
the solderability due to storage under the poor
condition.
(5) Please do not drop the products to avoid cracking
of ceramic element.

4. Others
Conformal coating of the component is acceptable.
However, the resin material, curing temperature, and
other process conditions should be evaluated to
confirm that stable electrical characteristics are
maintained.
Please be sure to consult with our sales representative
or engineer whenever and prior to using the products.

P16E.pdf

08.3.3

2

■ Notice (Rating)

The component may be damaged if excess mechanical
stress is applied.

■ Notice (Handling)

"CERALOCK" may stop oscillating or oscillate
irregularly under improper circuit conditions.

13

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

!Note

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

!Note

sales representatives or product engineers before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

MHz Chip Type Packaging for Automotive

■ Minimum Quantity

Part Number Plastic Tape ø180mm Plastic Tape ø330mm Bulk Dimensions

CSTCC_G_A
CSTCR_G_B

2

CSTCR_G15C
CSTCE_G_A
CSTCE_G15C
CSTCE_V_C
CSTCE_V13C
CSTCV_X_Q
CSACV_X_Q

The order quantity should be an integral multiple of the "Minimum Quantity" shown above.

c Dimensions of Reel

a b

2,000
3,000
3,000
3,000
3,000
3,000
3,000
2,000
2,000

6,000
9,000
9,000
9,000
9,000
9,000
9,000
6,000
6,000

500
500
500
500
500
500
500
500
500

P16E.pdf

08.3.3

a
a
a
b
b
b
b
a
a

(pcs.)

Trailer Leader

160-190

0

–1.5

ø13.0±0.2

13.0

(ø180 )

+1.0
0

2.0±0.5

17.0±1.0

■ Dimensions of Taping

4.0±0.1

(9.5)

4.0±0.1

The cover film peel strength force 0.1 to 0.7N
The cover film peel speed 300mm/min.

10˚

CSTCR_G15C

2.0±0.05

Cover Film

Empty Components

W0.1

ø1.5

Y0

(3) (2) (1)

W0.1

ø1.5

Y0

2.2±0.1
3˚ max.

Empty

160 min.

400-560

4.7±0.1

0.3±0.05

Cover Film

5.5±0.05 1.75±0.1

12.0±0.2

(1.85 max.)

1.25±0.05

Trailer

160-190

Empty Components

0

–1.5

ø13.0±0.2

9.0

(ø180 )

+1.0
0

2.0±0.5

13.0±1.0

CSTCE_G15C

4.0±0.1

2.0±0.05

(5.2)

4.0±0.1

The cover film peel strength force 0.1 to 0.7N
The cover film peel speed 300mm/min.

10°

Cover Film

(3) (2) (1)

ø1.0

1.50±0.1

ø1.5

+0.2

-0.0

+0.1

-0.0

Empty

160 min.

3° max.

Leader

Cover Film

400-560

3.40±0.1

0.25±0.05

1.75±0.1

3.5±0.05

0.90±0.10

(in mm)

8.0±0.2

(1.30 max.)

14

Direction of Feed

(in mm)

Direction of Feed

Continued on the following page.

(in mm)