Order parts on-line using Multiquip’s SmartEquip website!
■ View Parts Diagrams
■ Order Parts
■ Print Specifi cation Information
Goto www.multiquip.com and click on
Order Parts
to log in and save!
Order via Fax (Dealers Only):
All customers are welcome to order parts via Fax.
Domestic (US) Customers dial:
1-800-6-PARTS-7 (800-672-7877)
Order via Phone:
Non-Dealer Customers:
Contact your local Multiquip Dealer for
parts or call 800-427-1244 for help in
locating a dealer near you.
and Password, E-mail us at: parts@multiquip.
com.
To ob ta in an MQ Acc ou nt , co nta ct you r
District Sales Manager for more information.
Use the internet and qualify for a 5% Discount
on Standard orders for all orders which include
complete part numbers.*
Fax your order in and qualify for a 2% Discount
on Standard orders for all orders which include
complete part numbers.*
Domestic (US) Dealers Call:
1-800-427-1244
International Customers should contact
their local Multiquip Representatives for
Parts Ordering information.
Note: Discounts Are Subject To Change
Note: Discounts Are Subject To Change
❒ Dealer Account Number
❒ Dealer Name and Address
❒ Shipping Address (if different than billing address)
❒ Return Fax Number
❒ Applicable Model Number
❒ Quantity, Part Number and Description of Each Part
❒ Specify Preferred Method of Shipment:✓ UPS/Fed Ex ✓ DHL
■ Priority One ✓ Truck
■ Ground
■ Next Day
■ Second/Third Day
NOTICE
All orders are treated as Standard Orders and will
ship the same day if received prior to 3PM PST.
WE ACCEPT ALL MAJOR CREDIT CARDS!
EXPLANATION OF CODE IN REMARKS COLUMN
The following section explains the different symbols and
PART NO. Column
QTY. Column
— Item quantity can be indicated by a
A/R (As Required) is generally used for hoses or other
A blank entry generally indicates that the item is not sold
separately. Other entries will be clarifi ed in the “Remarks”
Some of the most common notes found in the “Remarks”
Column are listed below. Other additional notes needed
same unique symbol will be included when this item is
— Used to list an effective serial
— Indicates that the part
part is NOT used on a specifi c model or model number
available items. Examples include battery cables, shims,
— Indicates that an item cannot
be purchased as a separate item and is either part of an
assembly/kit that can be purchased, or is not available
remarks used in the Parts section of this manual. Use the
help numbers found on the back page of the manual if there
are any questions.
Numbers Used
number, a blank entry, or A/R.
NOTICE
The contents and part numbers listed in the parts
section are subject to change without notice. Multiquip
does not guarantee the availability of the parts listed.
4 12349 BEARING ..............1 .....S/N 2345B AND ABOVE
NO. Column
Unique Symbols — All items with same unique
symbol
(@, #, +, %, or >) in the number column belong to the
same assembly or kit, which is indicated by a note in the
“Remarks” column.
Duplicate Item Numbers — Duplicate numbers indicate
multiple part numbers, which are in effect for the same
general item, such as different size saw blade guards in
use or a part that has been updated on newer versions
of the same machine.
NOTICE
When ordering a part that has more than one item
number listed, check the remarks column for help in
determining the proper part to order.
parts that are sold in bulk and cut to length.
Column.
REMARKS Column
to describe the item can also be shown.
Assembly/Kit — All items on the parts list with the
purchased.
Indicated by:
“INCLUDES ITEMS W/(unique symbol)”
Serial Number Break
number range where a particular part is used.
Indicated by:
“S/N XXXXX AND BELOW”
“S/N XXXX AND ABOVE”
“S/N XXXX TO S/N XXX”
Specifi c Model Number Use
is used only with the specifi c model number or model
number variant listed. It can also be used to show a
variant.
Indicated by:
Numbers Used — Part numbers can be indicated by a
number, a blank entry, or TBD.
TBD (To Be Determined) is generally used to show a
part that has not been assigned a formal part number
at the time of publication.
A blank entry generally indicates that the item is not sold
separately or is not sold by Multiquip. Other entries will
be clarifi ed in the “Remarks” Column.
“XXXXX ONLY”
“NOT USED ON XXXX”
“Make/Obtain Locally” — Indicates that the part can
be purchased at any hardware shop or made out of
Lead from lead-based paints.
Crystalline silica from bricks.
Cement and other masonry products.
To avoid injury you must read and understand operator’s
manual before using this machine.
This machine to be operated by qualified personnel only.
Ask for training as needed.
NOTICE
Press and hold both pitch switches down
until pitch mode light blinks before installing
float pans.
MANUAL
SMART
PITCH™
LEFT
PITCH
TWIN
PITCH
CALIFORNIA— Proposition 65 Warning
Engine exhaust and some of its constituents, and some dust created
by power sanding, sawing, grinding, drilling and other construction
activities contains chemicals known to the State of California to
cause cancer, birth defects and other reproductive harm. Some
examples of these chemicals are:
Your risk from these exposures varies, depending on how often you
do this type of work.To reduce your exposure to these chemicals:
work in a well ventilated area, and work with approved
safety equipment, such as dust masks that are specially designed
to filter out microscopic particles.
ALWAYS
Arsenic and chromium from chemically treated lumber.
WARNING
NOTICE
THROTTLE
CRUISE
WARNINGSTOP
Cold weather starting below 40°F (4°C):
Run engine 3-5 minutes while moving
steering controls before depressing
blade control pedal.
Turbocharger damage may occur.
Idle engine for 3 minutes prior to
shutting down engine.
TURBOCHARGER
COLD WEATHER STARTING
CHARGE
OR
PITCH
STEERING
LEFT
M
OT
OR
RIGHT
MOT
OR
SERVICE PORTS
ELECTRICAL
CHARGE
OR
PITCH
STEERING
P/N 22827
WARNING
ROTATING BLADE
HAZARD
Keep hands
and feet clear
of guard rings.
Stop engine
before servicing.
P/N 35168
WARNING
Avoidinjur y.
P/N21665
Do NOToperate with
guards removed.
Replace guardbefore
operating machine.
WARNING
ROTATING BLADE
HAZARD
Keep hands
and feet clear
of guard rings.
Stop engine
before servicing.
P/N35168
CHECK
GEAR DRIVE
GEAR DRIVE
CHECK
HOT
BELT DRIVE
CLOCKWISE
COUNTER
CLOCKWISE
LUBRICATION
LUBRICATION
LIFTING POINTLIFTING POINT
LUBRICATION
LUBRICATION
B
A
C
P/N
360
99
DIESEL FUEL
P/N 1
1811
WARNING
ROTATING BLADE
HAZARD
Keep hands
and feet clear
of guard rings.
Stop engine
before servicing.
APPLY MINIMAL AMOUNT OF LPS ANTI-SEIZE GREASE TO THREADS OF SCREW (ITEM 4).
3
HAND START SCREWS. FOLLOWING TIGHTENING SEQUENCE (SEE DIAGRAM ABOVE).
TORQUE SCREW ASSEMBLY (FIRST PASS) TO A VALUE OF 21 FT-LBS (28.47 N.m). FOLLOW
SAME SEQUENCE FOR FINAL TORQUE OF 41 FT-LBS (55.59 N.m).
CLEAN WITH NON-PETROLEUM BASE CLEANER BEFORE INSTALLING ITEMS 8 AND 10.