The professional's choice.
PLASTER/MORTAR MIXERS
For almost 90 years MQ Essick plaster / mortar mixers have set the standard for innovation and durability. The 12 cubic foot capacity PRO series increases contractor productivity
in applications using on-site silo dispensing systems. The PRO uses a powerful hydraulic
drive to power through the toughest mix designs. A unique over-center dump design easily
discharges material into large mud tubs with minimal operator fatigue.
PRO12 (12 cubic ft.) shown with Mud Tub (sold separately)
• Reduced fatigue by enabling operator to load at waist level. Ergonomically designed
to load low and dump high.
• Adapt to any job site, while maintaining a compact footprint, with 130° swing-away
stabilizers.
• Extra thick 1/4" steel drum wrap with 3/8" ends resists wear and dents.
• Adjustable height - discharge height 24" ~ 42.5".
• Easily fits in a standard (PRO12) pickup truck bed with its compact design with
inboard hydraulic motor.
• Extended run times - up to 8 hours – with 5-gallon fuel tank. (PRO12)
• Costly waste is reduced by a spill plate that directs excess material into the tub.
• Tackle stiff mix designs, and handle up to 1-inch aggregate, with a powerful hydraulic
drive.
• Convenient access forklift pockets from any side of the mixer.
• Drive and dump controls easily accessible and located above the engine cowling.
• Greasable paddle shaft seal provides long service life.
PRO12 - retractable, swing away
stabilizers adapt to application
requirements.
PLASTER/MORTAR MIXERS
The ultimate heavy duty towable mortar mixers. The Multiquip Essick
EM120HYD has the dependability of a hydraulic drive that can handle the
toughest mixes. Mason tenders will appreciate hydraulic dump allows
effortless discharge into polyethylene MQ MudTubs. Rugged and reliable,
these units are built to last.
EM120HYD (12 cubic ft.)
*MudTub sold separately
• Reduced maintenance – by eliminating mechanical parts, maintenance and service costs are dramatically reduced.
• Built-in hydraulic s afety reli ef system – immediately disengages itself in case an object becomes wedged in the drum.
• Maintenance free-seal system requires n o greasing.
• Rugged 14 gauge e ngine cover – adds strength reducing vibration fatigue.
• MudTub – 10 cubic feet capacity c an be used for transporting up to 1,000 pounds (454 kg) of mortar or other job site
material. Available as skid or with caster wheels.
Professional masonry contractors
PLASTER/MORTAR MIXERS
Rectangular
frame, improved
wheelbarrow/mud
tub access. Includes
forklift pocket.
One piece engine
cover fabricated
of 12 gauge
material. Flip open
design provides
instant access for
routine service and
maintenance.
choose MQ Essick Mixers for their
performance and reliability. Our heavy
duty mixers are low maintenance and
are available in a full range of sizes
and drive configurations to suit any
application.
Convenient access
to engine controls
and recoil.
Optional rear
stabilizer kit.
Bolts on for
conversion to skid
mount for silo
applications. Part
number EMSTAB
EM12M (12 cubic ft.) — available with
mechanical drive transmission and
Honda GX390 engine.
• High strength cast iron paddle arms with rubber blades for a clean,
uniform mix
• Heavy d uty safet y grate with built-in bag cutter
• Rectangular frame for improved wheelbarrow and MudTub access
• Solid 5/8” axle with large B78x13” tires for smooth towing
• Forklift pocket for ease of transport and handling on site
• Heavy d uty removable tow bar made of schedule 80 steel available
Mechanical Drive
Drive gear and multiple disc
clutch are immersed in oil
and fully protected for long,
trouble-free life. Eliminates
wear components like
V-belts, external gears and
pulleys. Powers through
stiffer mixes.
with loop coupler, 2-inch ball coupler or pin-type coupler
Maintenance free seal
system protect the shaft
and bearings from wear.
Spring-loaded and selfadjusting graphite seals
require no greasing.
Essick mixers are the ideal choice for
PLASTER/MORTAR MIXERS
most jobs. Their durable construction,
easy maintenance and reliable design,
make it the right choice for masonry
contractors.
• High streng th cast iron paddle arms with rubber blades for a clean,
uniform mix.
• Durable paddle shaft manufactured of 1 3/4” square hardened steel.
• Paddle s haft seals are spring- loaded, self-adjusting and require no
greasing.
• Heavy d uty safet y grate with built-in bag cutter.
• Drum loc k secures drum while towing.
Less vibration.
Engine is mounted
solid to base,
minimizing
vibration. The
engine sits level —
for accuracy when
checking oil.
Built to last. Heavy
duty safety grid
with auto-open
safety bar.
Wider dump chute
for faster, easier
pours.
• Rugged 14 gauge stee l engine cover adds strength and punched
ventilation provides optimal cooling and added strength.
• Solid 5/8” axle with large B78x13” tires for smooth towing.
• Forkli ft pockets facilitate loading on trucks or transport on rough terrain.
EM70S (7 cubic ft.)
Double V-belt/gear
drive. Allows larger,
heavier mixes.
Cast-steel pulleys
increase durability.
Idler wheel provides
easy, positive
engagement.
Convenient, easy
operating engine
engagement lever.
Thick tubular steel
reinforced frame
resists damage,
provides superior
strength and proper
dumping clearance.
Multiquip concrete mixers are available with either steel or polyethylene
CONCRETE MIXERS
THE EASYCLEAN™ ADVANTAGE
drums. Their durable construction and low maintenance requirements will
provide you with years of reliable service.
• Wide drum opening for easy loading of material.
• Steel or EasyClean polyethylene drums.*
• Multi-position dump wheel for safe material discharge.
• Heavy-duty one-piece cast iron ring gear for long life.
• Heavy-duty retractable tow bar made of schedule 80
steel available with loop coupler, 2" ball coupler or pin-type
coupler.
• Axle springs, selected models, and large B78x13" tires for
smooth towing to your job.**
• Rugged 14-gauge steel engine covers with punched
ventilation openings for increased cooling and added
strength.
Model MC94S (9 cubic ft.)
* 4-cubic foot models available with steel drums only.
** Axle springs not available on 4-cubic foot models.
Our polyethylene drums put an end to clean up
problems and save you time and money.
Removing dry material from a steel-drum mixer,
may take several hours and result in dents or
damage in the process.
A simple tap with a rubber mallet does the job
— cleans out in minutes without dents, rust or
cracks!
Model MC94P (9 cubic ft.)
* Polyethylene drums available in 6 and 9 cubic
foot models only.
THE ULTIMATE CONCRETE MIXER!
The MC12PH concrete mixer handles your biggest and
toughest applications. It features a 12 cubic ft. capacity
Easyclean™ drum and powerful Honda GX340 engine.
BEFORE
AFTER
MIX-N-GO
The Mix-N-Go Concrete Mixer can
mix up to three cubic feet of material,
making it ideal for homeowners and
small contractors.
Available with a polyethylene drum, the Mix-N-Go is ideal for small footings and bases, binding
block and concrete patching. It is available with a gasoline engine or electric motor for operator
convenience. It can also be used as a wheelbarrow to transport concrete, and other material
around the job site.
• Power — ¾ HP, 115 single-phase UL- and CSA-approved electric motor.
• Pneumatic tires — for convenience on rough terrain.
• Gearbox — gears immersed in oil for long trouble-free life.
• Mixer stand allows drum to rotate 360 degrees, easily removed to use as wheelbarrow.
Specifications
Model
MC3PEA Polyethylene 3.0 cubic ft.
Drum
Construction
Max. Mixing
Capacity*
Engine
¾ HP, 115V, 1ø
Electric Motor
Height
in. (mm)
34
(863.6)
Width
in. (mm)
23 - 5/8
(584.2)
Length
in. (mm)
48 - 1/2
(1219 . 2)
Stand
Weight
lb. (kg)
35
(15. 9)
Dry
Weight
lb. (kg)
138
(62.6)
Specifications
Steel-Drum Models Plaster/Mortar Mixers
Model EM70S EM90S
Capacity — c.f. (liters) 7 (93) 9 (248) 12 ( 3 4 0) 12 (3 4 0 ) 12 (340 ) 20 (.566)
Capacity — bags (portland) 1½ to 2½ 2½ to 3½ 3½ to 4 3½ to 4 3½ to 4 6 to 7
1.5 HP 1ø
Power Sources**
Drum Material Steel Steel Steel Steel Steel Steel
Average weight* —
lbs. (kg)
Length (w/tongue) x
W x H — in. (cm)
Discharge height —
in. (cm)
Tires B78 x13” B78x13” B78x13” B78x13” Stationary Stationary
Drive V-Belt V-Belt Mechanical Hydraulic Hydraulic Hydraulic
Dump Action Manual Manual Manual Hydraulic Hydraulic Hydraulic
Towable Yes Yes Yes Yes Stationary Stationary
Optional Rear Stabilizer No No Yes Ye s No No
Tow Hitch Options HBC1 2" Ball Coupler / HLC1 Loop Coupler / HPC1 1" Pin Coupler N/A N/A
115/230V Electric
4.8 HP Honda
7.9 HP Honda
69 0 ( 313) 785 (356) 1,040 (471) 1,010 (454) 1580 (716.7 ) 2004 (908.9)
98x50x56
(248x127x142)
21 (53) 21 (5 3) 17 (4 3 ) 17 (43) Up to 42.5 Inches Up to 42.5 Inches
3 HP 1ø 230V
Electric
7.9 HP Honda
98x50x77
(248x127x196)
Concrete Mixers — Steel- and Poly-Drum Models
Steel Drum Models Polyethylene Drum Models
Model MC44S MC64S MC94S MC64P MC94P MC12P H
Capacity — cubic ft.
(liters)
4 ( 110) 6 (165) 9 (24 8) 6 (165) 9 (248) 12 (339 )
Capacity — bags 1/3 ½ 1 ½ 1 1.5 ~ 2
1.5 HP 1ø
Power Sources**
0.5 HP 1ø
115 V E lect.
3.5 HP Honda
115 / 230V El e c t .
4.8 HP Honda
7.9 HP Honda
9.5 Kohler
Average weight* —
lbs. (kg)
Length w/tongue x W
x H — in. (cm)
Discharge height — in.
(cm)
Drum opening — in.
(cm)
495 (225) 6 8 5 ( 311) 810 (3 67 ) 68 5 ( 3 11) 800 (363) 1000 (435.5)
87x51x54
(221x130x137)
102X51X59
(25 9X13 0X15 0)
23 (58) 23 (58) 23 (58) 23 (58) 23 (58) 23 (58)
17. 5 (4 4 ) 19 (48) 21 (53) 19 (4 8) 21 (53) 20 (50.8)
Tires B78 x13 B78 x13 B7 8x13 B78x13 B78 x13 B78 x13
Drive V-Belt V- Belt V-Belt V-Belt V-Belt V-Belt
Tow Hitch Options HBC1 2" Ball Coupler / HLC1 Loop Coupler / HPC1 1" Pin Coupler
Model Description Weight Dimensions
MUDTUB Stationary Skid 54 Lbs. (24.4 kg) 56.75” x 28.25” x 22.75” (1141 cm x 717.5 cm x 577.8 cm)
MUDTUBW Mobile w/ Casters 81 Lbs. (36.7 kg) 56.75” x 28.25” x 28.25” (1141 cm x 717.5 cm x 717.5 cm)
EM12M
(Mechanical)
5 HP 1ø 230V Electric
5 HP 3ø 230/460V
Electric
11.7 HP Honda
105x56x75
(266x142.2 x191)
1.5 HP 1ø
115 / 230V El e c t .
7.9 HP Honda
9.5 Kohler
106x 51x 63
(269x130x160)
EM120 HYD PRO12 PRO20
Honda GX39 0
11.7 Honda
110 x 51x 6 3
(279x130x160)
1.5 HP 1ø
115 / 230V El e c t .
4.8 HP Honda
7.9 HP Honda
9.5 Kohler
102X51X59
(25 9X13 0X15 0)
11.7hp 5 HP 1ø 230V
Electric
5 HP 3ø 230/460V
76.5x45.0x45.0
(19 4x11 4x114)
1.5 HP 1ø
115 / 230V El e c t .
7.9 HP Honda
9.5 Kohler
106x 51x 63
(269x130x160)
95.3x44.9x47.9
(242x113.7x121.6)
10.7 HP Honda
10 9 x5 6x67.5
(276.8x142.2x171.4)
(LxWxH)
Vanguard
18.0 HP
© COPYRIGHT 2022, MULTIQUIP INC.
* Mixer weight shown is an average; exact weight is dependent upon power source.
* Actual mix capacity based on a 9 4lb. bag of Portland cement. May var y depending on aggregate size and mix design.
** Engine power ratings are calculated by the individual engine manufacturer and the rating method may vary among engine manufacturers.
Multiquip Inc. and its subsidiary companies makes no claim, representation or warranty as to the power rating of the engine on this equipment and
disclaims any responsibility or liability of any kind whatsoever with respect to the accuracy of the engine power rating. Users are advised to consult
the engine manufacturer’s owners manual and its website for specific information regarding the engine power rating.
Your Multiquip dealer is:
Connect with us on
All features and specifications are subjec t to change without notice.
Version (03-2 2)
WWW.MULTIQUIP.COM
Loading...