9731-0484AHub Cap
10723-0448ABall Joint, 7/16-20, Lock
11736-0242Washer, Bell, .340 x .872 x .060
12783-04568Front Hanger Bracket, Deck
13738-04141Screw, Shoulder, .435 x .3485, 5/16-18
14738-0919Steering Shaft, 5/8 Spline x 21.86
15741-04124Bearing, Flange, Hex 5/8
16741-0475Plastic Bushing .380 ID
17747-04298Drag Link, Steering
18748-0389Cap, 1.25 x .16
19748-04065Steering, Block
20748-04068Spacer, .710 ID x .125 OD x .56
21750-04418Spacer, .322 ID x .625 OD x .21
22783-04644Stabilizer Plate, Gear Segment
23638-04007Axle Assembly, LH
24638-04008Axle Assembly, RH
25683-0128BPivot Bar
26710-0726Screw, 5/16-12, 0.750
27712-04065Nut, Flange Lock, 3/8-16, GrF, Nylon
28714-04039Pin, Cotter, 5/32, 1.25
29714-0470Pin, Cotter, 1/8 x 1.25
30726-0341Push Cap, 3/4
31731-1291AEnd Cap, Pivot Bar (w/ Fitting)
32736-0316Washer, Flat, .78 x 1.59 x .060
33738-04128Screw, Shoulder, .500 x 2.380, 3/8-16
34741-0660ABearing, Flange, .760 x .941 x 1.0
35747-04299Tie Rod
36783-04601Bracket, Pivot
37731-04057AAxle End Cap, Standard
38631-04028Steering Wheel, Standard Grip
48747-04289Control Rod, Speed Selector
49750-04294Spacer, Shoulder, .38 ID x 50 OD x.15
50750-04381Spacer, Flange, .390 x .671 x .95
51750-0802Spacer, .640 ID x .76 OD x 2.63
52783-04536Support Bracket, Pedal
53683-04175Bracket, Idler
54683-04176Torque Bracket, Transmission
55710-0604AScrew, 5/16-18, 0.625
56710-3005Screw, 3/8-16, 1.25, Gr5
57710-3144Screw, 3/8-16, 2.00, Gr5
58736-0300Washer, Flat, .406 x .875 x .059
59736-04188Washer, Flat, .63 x 1.00 x .015
60736-3039Washer, Flat, .406 x 1.5 x .105
61738-0347Spacer, Shoulder, .625 ID x .169
62756-0199Pulley, Flat Idler, 2.0 OD
63656-04015Pulley Ass’y, Variable Speed, 4.75 OD
64683-04174Bracket Ass’y, Variable Speed
65710-0627Screw, 5/16-24, .750, Gr5
66710-0642Screw, 1/4-20, 0.750
67718-04012Cup, Bearing
68736-0362Washer, Flat, .330 x 1.25 x .06
69741-0600Bearing, Ball, 17 x 40 x 12
70736-0242Bell Washer, .34 x .872 x .060
71634-0104Wheel Assembly
PA RT
NO.DESCRIPTION
746-04174Shift Lever, 6-Speed
734-1730Tire Only, 20 x 8 x 8
634-0070Rim Assembly (Inc. bearings, valve stem)
IMPORTANT:
For a proper
working machine, use
Factory Approved Parts.
V-belts are designed to
engage and disengage
safely. A substitute (non
OEM) V-belt can be
dangerous by not
disengaging completely.
NOTE:Tractor features vary by model. NOT all parts listed above and pictured on the previous page are standard equipment.
NOTE:Tractor features vary by model. NOT all parts listed above and pictured on the previous page are standard equipment.
17
www.mymowerparts.com
www.mymowerparts.com
Page 17
For Parts Call 606-678-9623 or 606-561-4983
For Parts Call 606-678-9623 or 606-561-4983
Model
s 760–779
5
13
1
2
8
8
9
3
6
7
4
10
21
14
12
20
11
19
16
17
15
3
18
22
23
24
25
28
26
27
29
18
www.mymowerparts.com
www.mymowerparts.com
Page 18
For Parts Call 606-678-9623 or 606-561-4983
For Parts Call 606-678-9623 or 606-561-4983
Models 760–779
REF.
NO.
1732-0614Ring, Wire
2716-0231Ring, E Type, .750
3736-0336Flat Washer, 5/8 x 1.0 x .030*
4736-0335Washer, Thrust .635 x 1.26 x .06
5710-1325Self-tapping Screw, 1/4-20 x 1.625
6719-04017Upper Housing
7711-1109Input Shaft
8741-0335Needle Bearing, .625 x .813 x .495
9717-146414-tooth Bevel Pinion
10716-0108Retaining Ring, .437
11741-0340Sleeve Bearing, .75 x .1.0 x 1.0
12721-0338Seal, .75 x 1.0 x .125
13618-04041 Differential Assembly
14741-0336Flange Bearing, 5/8 x 3/4 x 3/4
15717-136242-tooth Bevel Gear
16717-136342-tooth Bevel Gear
17718-0228Clutch Collar
18736-0519Flat Washer, .70 x 1.125 x .031
19711-04053Drive Shaft
20736-0495Thrust Washer, 1.0 x .632 x .0
21741-0337Flange Bearing, 5/8 x 3/4 x 15/16
22611-0011Detent Shaft Assembly
23741-0862Detent Ball
24732-0863Compression Spring
25719-04018Lower Housing
26717-0678Brake Puck
27761-0202Brake Disc
28710-1206Self-tapping Screw, 1/4-20 x 2.375
29661-0001Brake Assembly
—737-0148Grease (19 oz.)
PA RT
NO.DESCRIPTION
736-0337Flat Washer, 5/8 x 1.0 x .040*
736-0349Flat Washer, 5/8 x 1.0 x .020*
*Use applicable flat washer (12a, 12b or 12c) in this application allowing .0150/.0020 in. end-play
NOTE: If rebuilding the upper housing, include two ounces (2 oz.) of Unirex® N3 grease (Part No. 737-0289) in the input shaft cavity.
19
www.mymowerparts.com
www.mymowerparts.com
Page 19
For Parts Call 606-678-9623 or 606-561-4983
For Parts Call 606-678-9623 or 606-561-4983
Model
7
47
s 760–779
41
48
11
44
37
9
36
29
9
45
6
1
28
24
33
14
35
46
5
42
19
11
44
2
25
30
27
12
13
38
3
51
34
22
26
10
4
19
19
43
17
15
18
8
50
20
40
32
21
49
39
23
16
20
www.mymowerparts.com
www.mymowerparts.com
Page 20
For Parts Call 606-678-9623 or 606-561-4983
For Parts Call 606-678-9623 or 606-561-4983
Models 760–779
IMPORTANT:
For a proper
working machine, use
Factory Approved Parts.
V-belts are designed to
engage and disengage
safely. A substitute (non
OEM) V-belt can be
dangerous by not
disengaging completely.
9710-0726Screw, 5/16-12, 0.750
10710-0751Screw, 1/4-20, .620, Gr5
11710-0778Screw, 1/4-20, 1.500
12710-0817Screw, 5/16-18, 1.250
13710-3005Screw, 3/8-16, 1.25, Gr5
14710-3008Screw, 5/16-18, .75, Gr5
15711-04069Pin, Grasscatcher, 1/4-20
16712-0206Nut, Hex, 1/2-13, Gr5
17712-04063Nut, Flange Lock, 5/16-18, GrF, Nylon
18712-04064Nut, Flange Lock, 1/4-20, GrF, Nylon
19712-04065Nut, Flange Lock, 3/8-16, GrF, Nylon
20712-0417ANut, Flange, 5/8-18
21712-0641Nut, Hex, M16-1.5
22712-3006Nut, Hex, 1/4-20, Gr5
23712-3083Nut, Hex Lock, 1/2-13, Gr8, Nylon
24714-0104Pin, Cot, .072 Dia. x 1.13 Lg
25717-04074Gear, Deck Adjustment
26726-0233Nut, Push, .25 ID x .50 OD
27732-0308ASpring, Extension, .50 Dia. x 6.37
28732-04287Spring, Extension, .50 Dia. x 6.375
29734-0973Wheel, Deck 5.0 x 1.38
30736-0119Washer, Lock, 5/16
31736-0187Washer, Flat, .64 x 1.24 x .06
32736-0225Washer, Lock, 5/8, Internal Tooth
33736-0267Washer, Flat, .385 x .87 x .06
34736-0270Washer, Bell, .265 x.75 x .062
35736-0289Bushing, Shoulder, .320 ID x .135
36738-0373Screw, Shoulder, .498 x 1.53, 3/8-16
37738-04146Plug, Screw, M16 x 1.5
38738-04162Spacer, Shoulder, .8540 x .190
39742-0610ABlade, 19.38”, Star 3-in-1
40747-04322Deck Rod, Front Adjustable
41731-2363Mulch Plug
42747-04381Control Rod, Brake
43748-04069Pivot Cup, Deck Lift
44750-0566ASpacer, .260 x .372 x 1.030
45754-04062Belt, V-Type
46756-04129Idler Pulley, 4.25” Dia.
47712-3087Wing Nut, 1/4-20
48783-04602Cover, Belt, 5.66 Dia.
49783-1297Deck Skirt
50710-0599Screw, 1/4-20, .500
51731-1032BChute Assembly, Discharge
PA RT
NO.DESCRIPTION
683-04166Deck Shell, 38” (w/o Wheel Brackets)
NOTE:Tractor features vary by model. NOT all parts listed above and pictured on the previous page are standard equipment.
21
www.mymowerparts.com
www.mymowerparts.com
Page 21
For Parts Call 606-678-9623 or 606-561-4983
For Parts Call 606-678-9623 or 606-561-4983
Model
s 760–779
13
46
39
11
43
47
9
44
10
12
31
11
43
32
45
37
2
40
19
26
28
1
45
4
23
27
5
9
28
50
25
15
30
19
33
20
19
48
38
36
41
42
3
21
22
8
29
24
18
14
17
6
7
49
16
22
www.mymowerparts.com
www.mymowerparts.com
Page 22
For Parts Call 606-678-9623 or 606-561-4983
For Parts Call 606-678-9623 or 606-561-4983
Models 760–779
IMPORTANT:
For a proper
working machine, use
Factory Approved Parts.
V-belts are designed to
engage and disengage
safely. A substitute (non
OEM) V-belt can be
dangerous by not
disengaging completely.