MSI P43-C53 User Manual [ru]
P43-C53 series
MS-7519 (v3.x) Mainboard
G52-75191XM
Preface
MS-7519
Preface
Copyright Notice
The material in this document is the intellectual property of MICRO-STAR INTERNATIONAL. We take every care in the preparation of this document, but no guarantee is
given as to the correctness of its contents. Our products are under continual improvement and we reserve the right to make changes without notice.
Trademarks
All trademarks are the properties of their respective owners.
MSI® is registered trademark of Micro-Star Int’l Co.,Ltd.
￭
NVIDIA® is registered trademark of NVIDIA Corporation.
￭
ATI® is registered trademark of ATI Technologies, Inc.
￭
AMD® is registered trademarks of AMD Corporation.
￭
Intel® is registered trademarks of Intel Corporation.
￭
Windows® is registered trademarks of Microsoft Corporation.
￭
AMI® is registered trademark of American Megatrends, Inc.
￭
Award® is a registered trademark of Phoenix Technologies Ltd.
￭
Sound Blaster® is registered trademark of Creative Technology Ltd.
￭
Realtek® is registered trademark of Realtek Semiconductor Corporation.
￭
JMicron® is registered trademark of JMicron Technology Corporation.
￭
Netware® is a registered trademark of Novell, Inc.
￭
Revision History
Revision Revision History Date
V3.0 Release for PCB 3.x (Europe version) June 2010
Technical Support
If a problem arises with your system and no solution can be obtained from the user’s
manual, please contact your place of purchase or local distributor. Alternatively, please
try the following help resources for further guidance.
Visit the MSI website for FAQ, technical guide, BIOS updates, driver updates,
◙
and other information:
Contact our technical sta at:
◙
http://www.msi.com/index.php?func=service
http://ocss.msi.com
ii
MS-7519
Preface
Safety Instructions
Always read the safety instructions carefully.
￭
Keep this User’s Manual for future reference.
￭
Keep this equipment away from humidity.
￭
Lay this equipment on a reliable at surface before setting it up.
￭
The openings on the enclosure are for air convection hence protects the equipment
￭
from overheating. DO NOT COVER THE OPENINGS.
Make sure the voltage of the power source and adjust properly 110/220V before
￭
connecting the equipment to the power inlet.
Place the power cord such a way that people can not step on it. Do not place any-
￭
thing over the power cord.
Always Unplug the Power Cord before inserting any add-on card or module.
￭
All cautions and warnings on the equipment should be noted.
￭
Never pour any liquid into the opening that could damage or cause electrical
￭
shock.
If any of the following situations arises, get the equipment checked by service
￭
personnel:
The power cord or plug is damaged.
◯
Liquid has penetrated into the equipment.
◯
The equipment has been exposed to moisture.
◯
The equipment does not work well or you can not get it work according to User’s
◯
Manual.
The equipment has dropped and damaged.
◯
The equipment has obvious sign of breakage.
◯
DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT UNCONDITIONED,
STORAGE TEMPERATURE ABOVE 60oC (140oF), IT MAY DAMAGE THE EQUIPMENT.
MS-7519
Preface
CAUTION: Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by the manufacturer.
警告使用者:
這是甲類資訊產品，在居住的環境中使用時，可能會造成無線電干擾，在這種情況下，
使用者會被要求採取某些適當的對策。
廢電池請回收
For better environmental protection, waste batteries should be
collected separately for recycling special disposal.
iii
Preface
MS-7519
Preface
FCC-B Radio Frequency Interference Statement
This equipment has been tested and found
to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the
interference by one or more of the measures listed below.
Reorient or relocate the receiving antenna.
◯
Increase the separation between the equipment and receiver.
◯
Connect the equipment into an outlet on a circuit dierent from that to which the
◯
receiver is connected.
Consult the dealer or an experienced radio/television technician for help.
◯
Notice 1
The changes or modications not expressly approved by the party responsible for com-
pliance could void the user’s authority to operate the equipment.
Notice 2
Shielded interface cables and A.C. power cord, if any, must be used in order to comply
with the emission limits.
VOIR LA NOTICE D’INSTALLATION AVANT DE RACCORDER AU RESEAU.
Micro-Star International
MS-7519
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
this device may not cause harmful interference, and
1)
this device must accept any interference received, including interference that may
2)
cause undesired operation.
iv
MS-7519
Preface
MS-7519
WEEE (Waste Electrical and Electronic Equipment) Statement
ENGLISH
To protect the global environment and as an environmentalist, MSI must
remind you that...
Under the European Union (“EU”) Directive on Waste Electrical and Electronic Equipment, Directive 2002/96/EC, which takes eect on August 13,
2005, products of “electrical and electronic equipment” cannot be discarded
as municipal waste anymore and manufacturers of covered electronic equipment will be obligated to take back such products at the end of their useful life. MSI will
comply with the product take back requirements at the end of life of MSI-branded products that are sold into the EU. You can return these products to local collection points.
DEUTSCH
Hinweis von MSI zur Erhaltung und Schutz unserer Umwelt
Gemäß der Richtlinie 2002/96/EG über Elektro- und Elektronik-Altgeräte dürfen Elek-
tro- und Elektronik-Altgeräte nicht mehr als kommunale Abfälle entsorgt werden. MSI
hat europaweit verschiedene Sammel- und Recyclingunternehmen beauftragt, die in
die Europäische Union in Verkehr gebrachten Produkte, am Ende seines Lebenszyklus
zurückzunehmen. Bitte entsorgen Sie dieses Produkt zum gegebenen Zeitpunkt ausschliesslich an einer lokalen Altgerätesammelstelle in Ihrer Nähe.
FRANÇAIS
En tant qu’écologiste et an de protéger l’environnement, MSI tient à rappeler ceci...
Au sujet de la directive européenne (EU) relative aux déchets des équipement élec-
triques et électroniques, directive 2002/96/EC, prenant eet le 13 août 2005, que les
produits électriques et électroniques ne peuvent être déposés dans les décharges ou
tout simplement mis à la poubelle. Les fabricants de ces équipements seront obligés de
récupérer certains produits en n de vie. MSI prendra en compte cette exigence relative
au retour des produits en n de vie au sein de la communauté européenne. Par conséquent vous pouvez retourner localement ces matériels dans les points de collecte.
Preface
РУССКИЙ
Компания MSI предпринимает активные действия по защите окружающей среды,
поэтому напоминаем вам, что....
В соответствии с директивой Европейского Союза (ЕС) по предотвращению
загрязнения окружающей среды использованным электрическим и электронным
оборудованием (директива WEEE 2002/96/EC), вступающей в силу 13
августа 2005 года, изделия, относящиеся к электрическому и электронному
оборудованию, не могут рассматриваться как бытовой мусор, поэтому
производители вышеперечисленного электронного оборудования обязаны
принимать его для переработки по окончании срока службы. MSI обязуется
соблюдать требования по приему продукции, проданной под маркой MSI на
территории EC, в переработку по окончании срока службы. Вы можете вернуть
эти изделия в специализированные пункты приема.
v
Preface
MS-7519
Preface
ESPAÑOL
MSI como empresa comprometida con la protección del medio ambiente, recomienda:
Bajo la directiva 2002/96/EC de la Unión Europea en materia de desechos y/o equi-
pos electrónicos, con fecha de rigor desde el 13 de agosto de 2005, los productos
clasicados como “eléctricos y equipos electrónicos” no pueden ser depositados en
los contenedores habituales de su municipio, los fabricantes de equipos electrónicos,
están obligados a hacerse cargo de dichos productos al termino de su período de vida.
MSI estará comprometido con los términos de recogida de sus productos vendidos en
la Unión Europea al nal de su periodo de vida. Usted debe depositar estos productos
en el punto limpio establecido por el ayuntamiento de su localidad o entregar a una
empresa autorizada para la recogida de estos residuos.
NEDERLANDS
Om het milieu te beschermen, wil MSI u eraan herinneren dat….
De richtlijn van de Europese Unie (EU) met betrekking tot Vervuiling van Electrische
en Electronische producten (2002/96/EC), die op 13 Augustus 2005 in zal gaan kunnen niet meer beschouwd worden als vervuiling. Fabrikanten van dit soort producten
worden verplicht om producten retour te nemen aan het eind van hun levenscyclus.
MSI zal overeenkomstig de richtlijn handelen voor de producten die de merknaam MSI
dragen en verkocht zijn in de EU. Deze goederen kunnen geretourneerd worden op
lokale inzamelingspunten.
SRPSKI
Da bi zaštitili prirodnu sredinu, i kao preduzeće koje vodi računa o okolini i prirodnoj
sredini, MSI mora da vas podesti da…
Po Direktivi Evropske unije (“EU”) o odbačenoj ekektronskoj i električnoj opremi, Direktiva 2002/96/EC, koja stupa na snagu od 13. Avgusta 2005, proizvodi koji spadaju
pod “elektronsku i električnu opremu” ne mogu više biti odbačeni kao običan otpad i
proizvođači ove opreme biće prinuđeni da uzmu natrag ove proizvode na kraju njihovog
uobičajenog veka trajanja. MSI će poštovati zahtev o preuzimanju ovakvih proizvoda
kojima je istekao vek trajanja, koji imaju MSI oznaku i koji su prodati u EU. Ove proizvode možete vratiti na lokalnim mestima za prikupljanje.
POLSKI
Aby chronić nasze środowisko naturalne oraz jako rma dbająca o ekologię, MSI przypomina, że...
Zgodnie z Dyrektywą Unii Europejskiej (“UE”) dotyczącą odpadów produktów elektrycznych i elektronicznych (Dyrektywa 2002/96/EC), która wchodzi w życie 13 sierpnia
2005, tzw. “produkty oraz wyposażenie elektryczne i elektroniczne “ nie mogą być traktowane jako śmieci komunalne, tak więc producenci tych produktów będą zobowiązani
do odbierania ich w momencie gdy produkt jest wycofywany z użycia. MSI wypełni
wymagania UE, przyjmując produkty (sprzedawane na terenie Unii Europejskiej) wycofywane z użycia. Produkty MSI będzie można zwracać w wyznaczonych punktach
zbiorczych.
vi
MS-7519
Preface
MS-7519
TÜRKÇE
Çevreci özelliğiyle bilinen MSI dünyada çevreyi korumak için hatırlatır:
Avrupa Birliği (AB) Kararnamesi Elektrik ve Elektronik Malzeme Atığı, 2002/96/EC
Kararnamesi altında 13 Ağustos 2005 tarihinden itibaren geçerli olmak üzere, elektrikli
ve elektronik malzemeler diğer atıklar gibi çöpe atılamayacak ve bu elektonik cihazların
üreticileri, cihazların kullanım süreleri bittikten sonra ürünleri geri toplamakla yükümlü
olacaktır. Avrupa Birliği’ne satılan MSI markalı ürünlerin kullanım süreleri bittiğinde MSI
ürünlerin geri alınması isteği ile işbirliği içerisinde olacaktır. Ürünlerinizi yerel toplama
noktalarına bırakabilirsiniz.
ČESKY
Záleží nám na ochraně životního prostředí - společnost MSI upozorňuje...
Podle směrnice Evropské unie (“EU”) o likvidaci elektrických a elektronických výrobků
2002/96/EC platné od 13. srpna 2005 je zakázáno likvidovat “elektrické a elektronické
výrobky” v běžném komunálním odpadu a výrobci elektronických výrobků, na které se
tato směrnice vztahuje, budou povinni odebírat takové výrobky zpět po skončení jejich životnosti. Společnost MSI splní požadavky na odebírání výrobků značky MSI,
prodávaných v zemích EU, po skončení jejich životnosti. Tyto výrobky můžete odevzdat
v místních sběrnách.
MAGYAR
Annak érdekében, hogy környezetünket megvédjük, illetve környezetvédőként fellépve
az MSI emlékezteti Önt, hogy ...
Az Európai Unió („EU”) 2005. augusztus 13-án hatályba lépő, az elektromos és elektronikus berendezések hulladékairól szóló 2002/96/EK irányelve szerint az elektromos
és elektronikus berendezések többé nem kezelhetőek lakossági hulladékként, és az
ilyen elektronikus berendezések gyártói kötelessé válnak az ilyen termékek visszavételére azok hasznos élettartama végén. Az MSI betartja a termékvisszavétellel kapcsolatos követelményeket az MSI márkanév alatt az EU-n belül értékesített termékek
esetében, azok élettartamának végén. Az ilyen termékeket a legközelebbi gyűjtőhelyre
viheti.
Preface
ITALIANO
Per proteggere l’ambiente, MSI, da sempre amica della natura, ti ricorda che….
In base alla Direttiva dell’Unione Europea (EU) sullo Smaltimento dei Materiali Elettrici
ed Elettronici, Direttiva 2002/96/EC in vigore dal 13 Agosto 2005, prodotti appartenenti
alla categoria dei Materiali Elettrici ed Elettronici non possono più essere eliminati come
riuti municipali: i produttori di detti materiali saranno obbligati a ritirare ogni prodotto
alla ne del suo ciclo di vita. MSI si adeguerà a tale Direttiva ritirando tutti i prodotti
marchiati MSI che sono stati venduti all’interno dell’Unione Europea alla ne del loro
ciclo di vita. È possibile portare i prodotti nel più vicino punto di raccolta
vii
Preface
MS-7519
Preface
Contents
Copyright Notice ............................................................................................ ii
Trademarks .................................................................................................... ii
Revision History............................................................................................. ii
Technical Support.......................................................................................... ii
Safety Instructions .........................................................................................iii
FCC-B Radio Frequency Interference Statement.......................................... iv
WEEE (Waste Electrical and Electronic Equipment) Statement ....................v
English ...................................................................................................... En-1
Mainboard Specications ...................................................................................En-2
Quick Components Guide ..................................................................................En-4
Screw Holes .......................................................................................................En-5
CPU (Central Processing Unit) ..........................................................................En-6
Memory ............................................................................................................En-10
Power Supply ...................................................................................................En-12
Back Panel .......................................................................................................En-13
Connectors .......................................................................................................En-15
Jumpers ...........................................................................................................En-22
Switch ...............................................................................................................En-23
Button ...............................................................................................................En-24
Slots .................................................................................................................En-25
LED Status Indicators ......................................................................................En-27
BIOS Setup ......................................................................................................En-28
Software Information ........................................................................................En-37
Deutesch ..................................................................................................De-1
Spezikationen .................................................................................................. De-2
Komponenten-Übersicht ................................................................................... De-4
Schraubenlöcher .............................................................................................. De-5
CPU (Prozessor) ............................................................................................... De-6
Speicher .......................................................................................................... De-10
Stromversorgung ............................................................................................. De-12
Rücktafel ......................................................................................................... De-13
Anschlüssen .................................................................................................... De-15
Steckbrücke .................................................................................................... De-22
Schalter ........................................................................................................... De-23
Tasten ............................................................................................................. De-24
Steckplätze ...................................................................................................... De-25
LED Statusdikatoren ....................................................................................... De-27
viii
MS-7519
Preface
MS-7519
BIOS Setup ..................................................................................................... De-28
Software-Information ....................................................................................... De-37
Français ..................................................................................................... Fr-1
Spécications ......................................................................................................Fr-2
Guide Rapide Des Composants ..........................................................................Fr-4
Trous Taraudés ...................................................................................................Fr-5
Processeur : CPU ...............................................................................................Fr-6
Mémoire ............................................................................................................Fr-10
Connecteurs d’Alimentation ..............................................................................Fr-12
Panneau arrière ................................................................................................Fr-13
Connecteurs ......................................................................................................Fr-15
Cavaliers ...........................................................................................................Fr-22
Interrupteur ........................................................................................................Fr-23
Bouton ...............................................................................................................Fr-24
Emplacements ..................................................................................................Fr-25
Indicateurs Du Statut LED .................................................................................Fr-27
Réglage BIOS ...................................................................................................Fr-28
Information De Logiciel .....................................................................................Fr-37
Русский .................................................................................................... Ru-1
Характеристики ............................................................................................... Ru-2
Размещение компонентов системной платы ................................................ Ru-4
Отверстия для винтов ..................................................................................... Ru-5
CPU (Центральный процессор) ...................................................................... Ru-6
Память ............................................................................................................ Ru-10
Разъем питания ............................................................................................. Ru-12
Задняя панель ............................................................................................... Ru-13
Коннекторы .................................................................................................... Ru-15
Перемычки ..................................................................................................... Ru-22
Переключатели .............................................................................................. Ru-23
Кнопки............................................................................................................. Ru-24
Слоты ............................................................................................................. Ru-25
Световые индикаторы ................................................................................... Ru-27
Настройка BIOS ............................................................................................. Ru-28
Сведения о программном обеспечении ...................................................... Ru-37
Preface
ix
English
P43-C53 Series
Europe version
MS-7519 Mainboard
Mainboard Specications
Processor Support
Intel® Core™2 Extreme, Core™2 Quad, Core™2 Duo, Pentium™ Dual-Core and Cel-
■
eron™ Dual-Core processor in the LGA775 package
*(For the latest information about CPU, please visit http://www.msi.com/index.
php?func=cpuform2)
FSB
1600 *(OC)/ 1333/ 1066/ 800 MHz
■
Chipset
North Bridge: Intel® P43 chipset
■
South Bridge: Intel® ICH10 chipset
■
Memory Support
4 DDR3 DIMMs support DDR3 1600 *(OC)/ 1333/ 1066/ 800 DRAM speed (240pin/
■
1.5V, total 16GB Max)
(*OC means overclocking, for more information on compatible components, please
visit http://www.msi.com/index.php?func=testreport)
LAN
Supports 10/100/1000 LAN by Realtek® RTL8111E
■
Audio
Chip integrated by Realtek® ALC892/ ALC887 (optional)
■
Flexible 8-channel audio with jack sensing
■
Compliant with Azalia 1.0 Spec
■
IDE
1 IDE port by JMicron® JMB368
■
Supports Ultra DMA 66/100/133 mode
■
Supports PIO, Bus Master operation mode
■
SATA
6 SATA 3Gb/s (SATA1~6) ports by Intel® ICH10
■
IEEE 1394 (optional)
Chip integrated by VIA® VT6315N
■
Supports 1 IEEE 1394 port (back panel) & 1 IEEE 1394 connector (front panel)
■
En-2
FDD
1 oppy port
■
Supports 1 FDD with 360 KB, 720 KB, 1.2 MB, 1.44 MB and 2.88 MB
■
Connectors
Back panel
■
1 PS/2 mouse/ keyboard port
1 Optical S/PDIF-Out port
1 Serial port
1 IEEE 1394 port (optional)
6 USB 2.0 ports
1 LAN port
6 exible audio ports
-
On-Board
■
3 USB 2.0 connectors
1 IEEE 1394 connector (optional)
1 Chassis Intrusion connector
1 Serial Port connector
1 CD-In connector
1 S/PDIF-Out connector
1 Front Panel Audio connector
1 TPM Module connector
1 Overclocking Switch
1 Power Button
-
Slots
1 PCIE x16 slot
■
2 PCIE x1 slots
■
3 PCI slots, support 3.3V/ 5V PCI bus Interface
■
Form Factor
ATX (30.5 cm X 22.0 cm)
■
Mounting
6 mounting holes
■
English
* If you need to purchase accessories and request the part numbers, you could search
the product web page and nd details on our web address http://www.msi.com/index.
php
En-3
MS-7519 Mainboard
ON
1 2 3
Quick Components Guide
Back Panel,
En-13
OC_SW1, En-23
PCIE, En-25
PCI, En-26
JAUD1, En-20
JPWR2, En-12
CPU, En-6
CPUFAN1, En-17
DDR3, En-10
SYSFAN2, En-17
JPWR1, En-12
IDE1, En-15
SYSFAN1, En-17
JBAT1, En-22
JCI1, En-16
SATA, En-16
JUSB1~3, En-19
JTPM1, En-21
JFP1/ JFP2, En-18
En-4
JCD1, En-17
JSP1, En-20
FDD1, En-15
J1394_1, En-18
JCOM1, En-19
POWER1, En-24
ON
1 2 3
Screw Holes
When you install the mainboard, you have to place the mainboard into the chassis in the
correct direction. The locations of screws holes on the mainboard are shown as below.
The side has to toward
the rear, the position
for the I/O shield of the
chassis.
English
Screw holes
Refer above picture to install standos in the appropriate locations on chassis and then
screw through the mainboard screw holes into the standos.
Important
To prevent damage to the mainboard, any contact between the mainboard circuit and
•
chassis or unnecessary standos mounted on the chassis is prohibited.
Please make sure there is no metal components placed on the mainboard or within
•
the chassis that may cause short circuit of the mainboard.
En-5
MS-7519 Mainboard
CPU (Central Processing Unit)
When you are installing the CPU, make sure to install the cooler to prevent overheating.
If you do not have the CPU cooler, consult your dealer before turning on the computer.
For the latest information about CPU, please visit
php?func=cpuform2
Important
Overheating
Overheating will seriously damage the CPU and system. Always make sure the cooling
fan can work properly to protect the CPU from overheating. Make sure that you apply
an even layer of thermal paste (or thermal tape) between the CPU and the heatsink to
enhance heat dissipation.
Replacing the CPU
While replacing the CPU, always turn o the ATX power supply or unplug the power
supply’s power cord from the grounded outlet rst to ensure the safety of CPU.
Overclocking
This mainboard is designed to support overclocking. However, please make sure your
components are able to tolerate such abnormal setting, while doing overclocking. Any
attempt to operate beyond product specications is not recommended. We do not guarantee the damages or risks caused by inadequate operation or beyond product specications.
http://www.msi.com/index.
Introduction to LGA 775 CPU
The pin-pad side of LGA 775 CPU. The surface of LGA 775 CPU. Remem-
Alignment Key
Yellow triangle is the Pin 1 indicator
En-6
ber to apply some thermal paste on it for
better heat dispersion.
Alignment Key
Yellow triangle is the Pin 1 indicator
CPU & Cooler Installation
When you are installing the CPU, make sure the CPU has a cooler attached on the top
to prevent overheating. Meanwhile, do not forget to apply some thermal paste on CPU
before installing the heat sink/cooler fan for better heat dispersion.
Follow the steps below to install the CPU & cooler correctly. Wrong installation will
cause the damage of your CPU & mainboard.
The CPU socket has a plastic cap on
1.
it to protect the contact from damage.
Before you install the CPU, always
cover it to protect the socket pin.
The pins of socket reveal.3. Open the load lever.4.
Remove the cap from lever hinge
2.
side (as the arrow shows).
English
Important
Conrm if your CPU cooler is rmly installed before turning on your system.
•
Do not touch the CPU socket pins to avoid damaging.
•
The availability of the CPU land side cover depends on your CPU packing.
•
En-7
MS-7519 Mainboard
Lift the load lever up and open the
5. After conrming the CPU direction for
load plate.
Visually inspect if the CPU is seated
7. Cover the load plate onto the packwell into the socket. If not, take out
the CPU with pure vertical motion
and reinstall.
6.
correct mating, put down the CPU in
the socket housing frame. Be sure to
grasp on the edge of the CPU base.
Note that the alignment keys are
matched.
Alignment Key
8.
age.
En-8
Press down the load lever lightly onto
9. Align the holes on the mainboard with
the load plate, and then secure the
lever with the hook under retention
tab.
Press the four hooks down to fasten
11. Turn over the mainboard to conrm
the cooler. Then rotate the locking
switch (refer to the correct direction
10.
the heatsink. Push down the cooler
until its four clips get wedged into the
holes of the mainboard.
12.
that the clip-ends are correctly inserted.
marked on it) to lock the hooks.
Mainboard
English
lo cking
switch
Hook
Important
Read the CPU status in BIOS.
•
Whenever CPU is not installed, always protect your CPU socket pin with the plastic
•
cap covered (shown in Figure 1) to avoid damaging.
Mainboard photos shown in this section are for demonstration of the CPU/ cooler in-
•
stallation only. The appearance of your mainboard may vary depending on the model
you purchase.
En-9
MS-7519 Mainboard
Memory
These DIMM slots are used for installing memory modules. For more information on
compatible components, please visit
DDR3
240-pin, 1.5V
Dual-Channel mode Population Rule
In Dual-Channel mode, the memory modules can transmit and receive data with two
data bus lines simultaneously. Enabling Dual-Channel mode can enhance the system
performance. The following illustrations explain the population rules for Dual-Channel
mode.
http://www.msi.com/index.php?func=testreport
48x2=96 pin 72x2=144 pin
DIMM2
DIMM3
DIMM4
1
DIMM1
2
DIMM1
DIMM2
DIMM3
DIMM4
Installed
Empty
Important
DDR3 memory modules are not interchangeable with DDR2 and the DDR3 standard
•
is not backwards compatible. You should always install DDR3 memory modules in
the DDR3 DIMM slots.
In Dual-Channel mode, make sure that you install memory modules of the same type
•
and density in dierent channel DIMM slots.
To enable successful system boot-up, always insert the memory modules into the
•
DIMM1 rst.
Due to the chipset resource deployment, the system density will only be detected up
•
to 15+GB (not full 16GB) when each DIMM is installed with a 4GB memory module.
En-10
Installing Memory Modules
The memory module has only one notch on the center and will only t in the right
1.
orientation.
Insert the memory module vertically into the DIMM slot. Then push it in until the
2.
golden nger on the memory module is deeply inserted in the DIMM slot. The plastic
clip at each side of the DIMM slot will automatically close when the memory module
is properly seated.
Manually check if the memory module has been locked in place by the DIMM slot
3.
clips at the sides.
Notch
Volt
English
Important
You can barely see the golden nger if the memory module is properly inserted in the
DIMM slot.
En-11
MS-7519 Mainboard
13 .+3 .3
V
1. +3. 3
V
14 .-1 2V
2. +3. 3
V
15 .Gr oun d
3
.G rou nd
16 .PS -ON
#
4. +5
V
17 .Gr oun d
5
.G rou nd
18 .Gr oun d
6. +5
V
19 .Gr oun d
7
.G rou nd
22 .+5
V
10 .+1 2V
20 .Re s
8. PW
R O
K
23 .+5
V
11
.+ 12V
21 .+5
V
9. 5VS B
24 .Gr oun d
12 .+3 .3
V
7. +12 V
3.
Gr oun d
5. +12 V
1.
Gr oun d
8. +12 V
4
.G rou nd
6. +12 V
2
.G rou nd
Power Supply
ATX 24-pin Power Connector: JPWR1
This connector allows you to connect an ATX 24-pin power supply. To connect the ATX
24-pin power supply, make sure the plug of the power supply is inserted in the proper
orientation and the pins are aligned. Then push down the power supply rmly into the
connector.
You may use the 20-pin ATX power supply as you like. If you’d like to use the 20-pin
ATX power supply, please plug your power supply along with pin 1 & pin 13.
ATX 8-pin CPU Power Connector: JPWR2
This connector provides 12V power output to the CPU.
Important
Make sure that all the connectors are connected to proper ATX power supplies to
•
ensure stable operation of the mainboard.
En-12
Back Panel
Optical S/PDIF-Out
Mouse/Keyboard
Optical S/PDIF-Out
▶
Serial Port
(optional)
IEEE 1394 Port
USB 2.0 PortUSB 2.0 Port
LAN
USB 2.0 Port
Line-In
Line-Out
Mic
RS-Out
CS-Out
SS-Out
This S/PDIF (Sony & Philips Digital Interconnect Format) connector is provided for digital audio transmission to external speakers through an optical ber cable.
Mouse/Keyboard
▶
The standard PS/2® mouse/keyboard DIN connector is for a PS/2® mouse/keyboard.
Serial Port
▶
The serial port is a 16550A high speed communications port that sends/ receives 16
bytes FIFOs. You can attach a serial mouse or other serial devices directly to the connector.
IEEE 1394 Port (optional)
▶
The IEEE1394 port on the back panel provides connection to IEEE1394 devices.
USB 2.0 Port
▶
The USB (Universal Serial Bus) port is for attaching USB devices such as keyboard,
mouse, or other USB - compatible devices. Supports data transfer rate up to 480 Mbit/s
(Hi-Speed).
English
En-13
MS-7519 Mainboard
LAN
▶
The standard RJ-45 LAN jack is for connection to
Yellow Green/ Orange
the Local Area Network (LAN). You can connect a
network cable to it.
LED Color LED State Condition
Left Yellow O LAN link is not established.
On(Steady state) LAN link is established.
On(brighter & pulsing) The computer is communicating with another computer on the LAN.
Right Green O 10 Mbits/sec data rate is selected.
On 100 Mbits/sec data rate is selected.
Orange On 1000 Mbits/sec data rate is selected.
Audio Ports
▶
These audio connectors are used for audio devices. It is easy to dierentiate between
audio eects according to the color of audio jacks.
Line-In (Blue) - Line In, is used for external CD player, tape-player or other
■
audio devices.
Line-Out (Green) - Line Out, is a connector for speakers or headphones.
■
Mic (Pink) - Mic, is a connector for microphones.
■
RS-Out (Black) - Rear-Surround Out in 4/ 5.1/ 7.1 channel mode.
■
CS-Out (Orange) - Center/ Subwoofer Out in 5.1/ 7.1 channel mode.
■
SS-Out (Gray) - Side-Surround Out 7.1 channel mode.
■
En-14
Connectors
Floppy Disk Drive Connector: FDD1
This connector supports 360 KB, 720 KB, 1.2 MB, 1.44 MB or 2.88 MB oppy disk
drive.
* The MB layout in this gure is for reference only.
IDE Connector: IDE1
This connector supports IDE hard disk drives, optical disk drives and other IDE devices.
English
* The MB layout in this gure is for reference only.
Important
If you install two IDE devices on the same cable, you must congure the drives separately to master / slave mode by setting jumpers. Refer to IDE device’s documentation
supplied by the vendors for jumper setting instructions.
En-15
MS-7519 Mainboard
1
.
C
I
N
T
R
U
2
.
G
r
o
u
n
d
Serial ATA Connector: SATA1~6
This connector is a high-speed Serial ATA interface port. Each connector can connect
to one Serial ATA device.
* The MB layout in this gure is for reference only.
Important
Please do not fold the Serial ATA cable into 90-degree angle. Otherwise, data loss may
occur during transmission.
Chassis Intrusion Connector: JCI1
This connector connects to the chassis intrusion switch cable. If the chassis is opened,
the chassis intrusion mechanism will be activated. The system will record this status
and show a warning message on the screen. To clear the warning, you must enter the
BIOS utility and clear the record.
En-16
Fan Power Connectors: CPUFAN1,SYSFAN1,SYSFAN2
1
.G rou nd
2. +12 V
3. Sen sor
/ N
o U
se
1
.
G
r
o
u
n
d
2
.
+
1
2
V
3
.
S
e
n
s
o
r
4
.
C
o
n
t
r
o
l
4
.
R
3
.
G
r
o
u
n
d
2
.
G
r
o
u
n
d
1
.
L
The fan power connectors support system cooling fan with +12V. When connecting the
wire to the connectors, always note that the red wire is the positive and should be connected to the +12V; the black wire is Ground and should be connected to GND. If the
mainboard has a System Hardware Monitor chipset on-board, you must use a specially
designed fan with speed sensor to take advantage of the CPU fan control.
English
CPUFAN1
SYSFAN1/2
Important
Please refer to the recommended CPU fans at processor’s ocial website or consult
•
the vendors for proper CPU cooling fan.
CPUFAN1 support Smart fan control. You can install Control Center utility that will
•
automatically control the CPUFAN1 speeds according to the actual CPUFAN1 temperatures.
Fan cooler set with 3 or 4 pins power connector are both available for CPUFAN1.
•
CD-In Connector: JCD1
This connector is provided for external audio input.
En-17
MS-7519 Mainboard
1
.Grou nd
3.Sus pen d
LE
D
5.Pow er
LE
D
7.No Pi
n
8.
+
6.
-
4.
+
2.
-
Buzze r
S
peake r
1. +
3.
-
10 .No
Pi
n
5.
Re set
S
wi tch
HD D
LE
D
P
ow er
S
wi tch
P
ow er
LE
D
7.
+
9. Res erv e
d
8.
-
6.
+
4.
-
2.
+
Front Panel Connectors: JFP1, JFP2
These connectors are for electrical connection to the front panel switches and LEDs.
The JFP1 is compliant with Intel® Front Panel I/O Connectivity Design Guide.
JFP1
JFP2
IEEE1394 Connector: J1394_1 (Optional)
This connector allows you to connect the IEEE1394 device via an optional IEEE1394
bracket.
* The MB layout in this gure is for reference only.
1394 Bracket (optional)
En-18
Front USB Connector: JUSB1~3
1
.
D
C
D
3
.
S
O
U
T
1
0
.
N
o
P
i
n
5
.
G
r
o
u
n
d
7
.
R
T
S
9
.
R
I
8
.
C
T
S
6
.
D
S
R
4
.
D
T
R
2
.
S
I
N
This connector, compliant with Intel® I/O Connectivity Design Guide, is ideal for connecting high-speed USB interface peripherals such as USB HDD, digital cameras, MP3
players, printers, modems and the like.
* The MB layout in this gure is for reference only.
USB 2.0 Bracket (optional)
Important
Note that the pins of VCC and GND must be connected correctly to avoid possible
damage.
English
Serial Port Connector: JCOM1
This connector is a 16550A high speed communication port that sends/ receives 16
bytes FIFOs. You can attach a serial device.
En-19
MS-7519 Mainboard
1
.
M
I
C
L
3
.
M
I
C
R
1
0
.
H
e
a
d
P
h
o
n
e
D
e
t
e
c
t
i
o
n
5
.
H
e
a
d
P
h
o
n
e
R
7
.
S
E
N
S
E
_
S
E
N
D
9
.
H
e
a
d
P
h
o
n
e
L
8
.
N
o
P
i
n
6
.
M
I
C
D
e
t
e
c
t
i
o
n
4
.
P
R
E
S
E
N
C
E
#
2
.
G
r
o
u
n
d
S/PDIF-Out Connector: JSP1
This connector is used to connect S/PDIF (Sony & Philips Digital Interconnect Format)
interface for digital audio transmission.
* The MB layout in this gure is for reference only.
S/PDIF-Out Bracket (optional)
Front Panel Audio Connector: JAUD1
This connector allows you to connect the front panel audio and is compliant with Intel
Front Panel I/O Connectivity Design Guide.
En-20
®
Loading...