MSI IM-QM67, MS-9887 User Manual

IM-QM67

MS-9887 (v1.x) Industrial Computer Board

ii

Preface

▍

Copyright Notice

The material in this document is the intellectual property of MICRO-STAR IN­TERNATIONAL. We take every care in the preparation of this document, but no
guarantee is given as to the correctness of its contents. Our products are under
continual improvement and we reserve the right to make changes without notice.

Trademarks

All trademarks are the properties of their respective owners.

MSI® is registered trademark of Micro-Star Int’l Co.,Ltd.
NVIDIA® is registered trademark of NVIDIA Corporation.
ATI® is registered trademark of ATI Technologies, Inc.
AMD® is registered trademarks of AMD Corporation.
Intel® is registered trademarks of Intel Corporation.
Windows® is registered trademarks of Microsoft Corporation.
AMI® is registered trademark of Advanced Micro Devices, Inc.
Award® is a registered trademark of Phoenix Technologies Ltd.
Sound Blaster® is registered trademark of Creative Technology Ltd.
Realtek® is registered trademark of Realtek Semiconductor Corporation.
JMicron® is registered trademark of JMicron Technology Corporation.
Netware® is a registered trademark of Novell, Inc.

Revision History

Revision Revision History Date
V1.1 For PCB v1.x 2011 / 04

Technical Support

If a problem arises with your system and no solution can be obtained from the
user’s manual, please contact your place of purchase or local distributor. Alterna­tively, please try the following help resources for further guidance.

Visit the MSI website for FAQ, technical guide, BIOS updates,
driver updates, and other information:

http://www.msi.com/index.

php?func=service

Contact our technical staff at:

http://ocss.msi.com

￭
￭
￭
￭
￭
￭
￭
￭
￭
￭
￭
￭

◙

◙

iii

MS-9887

Safety Instructions

Always read the safety instructions carefully.
Keep this User’s Manual for future reference.
Keep this equipment away from humidity.

Lay this equipment on a reliable at surface before setting it up.

The openings on the enclosure are for air convection hence protects the
equipment from overheating. DO NOT COVER THE OPENINGS.

Make sure the voltage of the power source and adjust properly 110/220V
before connecting the equipment to the power inlet.

Place the power cord such a way that people can not step on it. Do not
place anything over the power cord.

Always Unplug the Power Cord before inserting any add-on card or mod­ule.

All cautions and warnings on the equipment should be noted.
Never pour any liquid into the opening that could damage or cause electri-

cal shock.
If any of the following situations arises, get the equipment checked by ser-

vice personnel:

The power cord or plug is damaged.
Liquid has penetrated into the equipment.
The equipment has been exposed to moisture.
The equipment does not work well or you can not get it work according

to User’s Manual.
The equipment has dropped and damaged.
The equipment has obvious sign of breakage.

DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT UNCONDI­TIONED, STORAGE TEMPERATURE ABOVE 60oC (140oF), IT MAY DAM­AGE THE EQUIPMENT.

CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with

the same or equivalent type recommended by the manufacturer.

警告使用者:
這是甲類資訊產品，在居住的環境中使用時，可能會造成無線電干擾，在這種情

況下，使用者會被要求採取某些適當的對策。

廢電池請回收
For better environmental protection, waste batteries should be
collected separately for recycling special disposal.

￭
￭
￭
￭
￭

￭
￭
￭
￭

￭
￭

◯
◯
◯
◯

◯
◯

￭

iv

Preface

▍

FCC-B Radio Frequency Interference Statement

This equipment has been tested and
found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed
to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the measures listed below.

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.
Consult the dealer or an experienced radio/television technician for help.

Notice 1

The changes or modications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.
Notice 2
Shielded interface cables and A.C. power cord, if any, must be used in order to

comply with the emission limits.

◯
◯
◯

◯

VOIR LA NOTICE D’INSTALLATION AVANT DE RACCORDER AU RESEAU.
This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

this device may not cause harmful interference, and
this device must accept any interference received, including interference that

may cause undesired operation.

1)

2)

Micro-Star International

MS-9887

v

MS-9887

WEEE (Waste Electrical and Electronic Equipment) Statement

ENGLISH

To protect the global environment and as an environmentalist, MSI must re­mind you that...

Under the European Union (“EU”) Directive on Waste Electrical and Electronic
Equipment, Directive 2002/96/EC, which takes effect on August 13, 2005,
products of “electrical and electronic equipment” cannot be discarded as municipal waste
anymore and manufacturers of covered electronic equipment will be obligated to take back
such products at the end of their useful life. MSI will comply with the product take back
requirements at the end of life of MSI-branded products that are sold into the EU. You can
return these products to local collection points.

DEUTSCH

Hinweis von MSI zur Erhaltung und Schutz unserer Umwelt
Gemäß der Richtlinie 2002/96/EG über Elektro- und Elektronik-Altgeräte dürfen Elektro-

und Elektronik-Altgeräte nicht mehr als kommunale Abfälle entsorgt werden. MSI hat
europaweit verschiedene Sammel- und Recyclingunternehmen beauftragt, die in die Eu­ropäische Union in Verkehr gebrachten Produkte, am Ende seines Lebenszyklus zurück­zunehmen. Bitte entsorgen Sie dieses Produkt zum gegebenen Zeitpunkt ausschliesslich
an einer lokalen Altgerätesammelstelle in Ihrer Nähe.

FRANÇAIS

En tant qu’écologiste et an de protéger l’environnement, MSI tient à rappeler ceci...

Au sujet de la directive européenne (EU) relative aux déchets des équipement électriques
et électroniques, directive 2002/96/EC, prenant effet le 13 août 2005, que les produits
électriques et électroniques ne peuvent être déposés dans les décharges ou tout simple-

ment mis à la poubelle. Les fabricants de ces équipements seront obligés de récupérer
certains produits en n de vie. MSI prendra en compte cette exigence relative au retour des
produits en n de vie au sein de la communauté européenne. Par conséquent vous pouvez

retourner localement ces matériels dans les points de collecte.

РУССКИЙ

Компания MSI предпринимает активные действия по защите окружающей среды,

поэтому напоминаем вам, что....

В соответствии с директивой Европейского Союза (ЕС) по предотвращению
загрязнения окружающей среды использованным электрическим и электронным
оборудованием (директива WEEE 2002/96/EC), вступающей в силу 13 августа 2005
года, изделия, относящиеся к электрическому и электронному оборудованию, не могут
рассматриваться как бытовой мусор, поэтому производители вышеперечисленного
электронного оборудования обязаны принимать его для переработки по окончании
срока службы. MSI обязуется соблюдать требования по приему продукции, проданной
под маркой MSI на территории EC, в переработку по окончании срока службы. Вы
можете вернуть эти изделия в специализированные пункты приема.

vi

Preface

▍

ESPAÑOL

MSI como empresa comprometida con la protección del medio ambiente, recomienda:
Bajo la directiva 2002/96/EC de la Unión Europea en materia de desechos y/o equipos

electrónicos, con fecha de rigor desde el 13 de agosto de 2005, los productos clasicados

como “eléctricos y equipos electrónicos” no pueden ser depositados en los contenedores
habituales de su municipio, los fabricantes de equipos electrónicos, están obligados a
hacerse cargo de dichos productos al termino de su período de vida. MSI estará com­prometido con los términos de recogida de sus productos vendidos en la Unión Europea

al nal de su periodo de vida. Usted debe depositar estos productos en el punto limpio

establecido por el ayuntamiento de su localidad o entregar a una empresa autorizada para
la recogida de estos residuos.

NEDERLANDS

Om het milieu te beschermen, wil MSI u eraan herinneren dat….
De richtlijn van de Europese Unie (EU) met betrekking tot Vervuiling van Electrische en

Electronische producten (2002/96/EC), die op 13 Augustus 2005 in zal gaan kunnen
niet meer beschouwd worden als vervuiling. Fabrikanten van dit soort producten wor­den verplicht om producten retour te nemen aan het eind van hun levenscyclus. MSI zal
overeenkomstig de richtlijn handelen voor de producten die de merknaam MSI dragen
en verkocht zijn in de EU. Deze goederen kunnen geretourneerd worden op lokale inza­melingspunten.

SRPSKI

Da bi zaštitili prirodnu sredinu, i kao preduzeće koje vodi računa o okolini i prirodnoj sredini,

MSI mora da vas podesti da…

Po Direktivi Evropske unije (“EU”) o odbačenoj ekektronskoj i električnoj opremi, Direktiva

2002/96/EC, koja stupa na snagu od 13. Avgusta 2005, proizvodi koji spadaju pod “elek-

tronsku i električnu opremu” ne mogu više biti odbačeni kao običan otpad i proizvođači
ove opreme biće prinuđeni da uzmu natrag ove proizvode na kraju njihovog uobičajenog
veka trajanja. MSI će poštovati zahtev o preuzimanju ovakvih proizvoda kojima je istekao
vek trajanja, koji imaju MSI oznaku i koji su prodati u EU. Ove proizvode možete vratiti na

lokalnim mestima za prikupljanje.

POLSKI

Aby chronić nasze środowisko naturalne oraz jako rma dbająca o ekologię, MSI przy­pomina, że...

Zgodnie z Dyrektywą Unii Europejskiej (“UE”) dotyczącą odpadów produktów elektryc­znych i elektronicznych (Dyrektywa 2002/96/EC), która wchodzi w życie 13 sierpnia 2005,
tzw. “produkty oraz wyposażenie elektryczne i elektroniczne “ nie mogą być traktowane
jako śmieci komunalne, tak więc producenci tych produktów będą zobowiązani do odbi­erania ich w momencie gdy produkt jest wycofywany z użycia. MSI wypełni wymagania
UE, przyjmując produkty (sprzedawane na terenie Unii Europejskiej) wycofywane z użycia.
Produkty MSI będzie można zwracać w wyznaczonych punktach zbiorczych.

vii

MS-9887

TÜRKÇE

Çevreci özelliğiyle bilinen MSI dünyada çevreyi korumak için hatırlatır:
Avrupa Birliği (AB) Kararnamesi Elektrik ve Elektronik Malzeme Atığı, 2002/96/EC Kara-

rnamesi altında 13 Ağustos 2005 tarihinden itibaren geçerli olmak üzere, elektrikli ve elek­tronik malzemeler diğer atıklar gibi çöpe atılamayacak ve bu elektonik cihazların üreti­cileri, cihazların kullanım süreleri bittikten sonra ürünleri geri toplamakla yükümlü olacaktır.
Avrupa Birliği’ne satılan MSI markalı ürünlerin kullanım süreleri bittiğinde MSI ürünlerin
geri alınması isteği ile işbirliği içerisinde olacaktır. Ürünlerinizi yerel toplama noktalarına
bırakabilirsiniz.

ČESKY

Záleží nám na ochraně životního prostředí - společnost MSI upozorňuje...
Podle směrnice Evropské unie (“EU”) o likvidaci elektrických a elektronických výrobků

2002/96/EC platné od 13. srpna 2005 je zakázáno likvidovat “elektrické a elektronické

výrobky” v běžném komunálním odpadu a výrobci elektronických výrobků, na které se
tato směrnice vztahuje, budou povinni odebírat takové výrobky zpět po skončení je­jich životnosti. Společnost MSI splní požadavky na odebírání výrobků značky MSI,
prodávaných v zemích EU, po skončení jejich životnosti. Tyto výrobky můžete odevzdat
v místních sběrnách.

MAGYAR

Annak érdekében, hogy környezetünket megvédjük, illetve környezetvédőként fellépve az

MSI emlékezteti Önt, hogy ...
Az Európai Unió („EU”) 2005. augusztus 13-án hatályba lépő, az elektromos és elek-

tronikus berendezések hulladékairól szóló 2002/96/EK irányelve szerint az elektromos és

elektronikus berendezések többé nem kezelhetőek lakossági hulladékként, és az ilyen

elektronikus berendezések gyártói kötelessé válnak az ilyen termékek visszavételére
azok hasznos élettartama végén. Az MSI betartja a termékvisszavétellel kapcsolatos
követelményeket az MSI márkanév alatt az EU-n belül értékesített termékek esetében,

azok élettartamának végén. Az ilyen termékeket a legközelebbi gyűjtőhelyre viheti.

ITALIANO

Per proteggere l’ambiente, MSI, da sempre amica della natura, ti ricorda che….
In base alla Direttiva dell’Unione Europea (EU) sullo Smaltimento dei Materiali Elettrici ed

Elettronici, Direttiva 2002/96/EC in vigore dal 13 Agosto 2005, prodotti appartenenti alla

categoria dei Materiali Elettrici ed Elettronici non possono più essere eliminati come riuti
municipali: i produttori di detti materiali saranno obbligati a ritirare ogni prodotto alla ne del
suo ciclo di vita. MSI si adeguerà a tale Direttiva ritirando tutti i prodotti marchiati MSI che
sono stati venduti all’interno dell’Unione Europea alla ne del loro ciclo di vita. È possibile

portare i prodotti nel più vicino punto di raccolta

viii

Preface

▍

CONTENTS

Copyright Notice �������������������������������������������������������������������������������������������������� ii
Trademarks ���������������������������������������������������������������������������������������������������������� ii
Revision History �������������������������������������������������������������������������������������������������� ii
Technical Support ����������������������������������������������������������������������������������������������� ii
Safety Instructions ��������������������������������������������������������������������������������������������� iii
FCC-B Radio Frequency Interference Statement �������������������������������������������� iv

WEEE (Waste Electrical and Electronic Equipment) Statement ��������� v
Chapter 1 Overview ������������������������������������������������������������������������������������������1-1

Mainboard Specications ........................................................................... 1-2

Mainboard Layout ...................................................................................... 1-4

Chapter 2 Hardware Setup������������������������������������������������������������������������������� 2-1

Quick Components Guide .......................................................................... 2-2

CPU (Central Processing Unit) .................................................................. 2-3

Memory ...................................................................................................... 2-5

Power Supply ............................................................................................. 2-6

Back Panel I/O ........................................................................................... 2-7

Connector ..................................................................................................2-9

Jumper ..................................................................................................... 2-15

Slot ........................................................................................................... 2-17

▍

Thank you for choosing the IM-QM67, an excellent in­dustrial computer board from MSI.

Based on the innovative Intel® QM67 chipsets for
optimal system efciency, the IM-QM67 accommo­dates the Intel® Core™i7 / i5 / i3 or Celeron® proces­sor in rPGA-989 (Socket G2) and supports 2 DDR3
1067/1333 DIMM slots to provide the maximum of
16GB memory capacity.

In the entry-level and mid-range market segment, the
IM-QM67 provides a high-performance solution for
today’s front-end and general purpose workstation, as
well as in the future.

Chapter 1

Overview

1-2

Overview

▍

Mainboard SpecificationS

CPU

Intel® Core™i7 / i5 / i3 or Celeron® processor in
rPGA-989 (Socket G2)

■

Chipset

Intel® QM67 Chipset■

Memory

2 unbuffered non-ECC DDR3 1067/1333 DIMM
slots
Supports the maximum of 16GB

■

■

LAN

Intel® 82579LM Gigabit Fast Ethernet controller
Intel® 82574L Gigabit Fast Ethernet controller

■

■

SATA

2 SATA 6Gb/s ports (SATA1~2)
2 SATA 3Gb/s ports (SATA3~4)

■

■

Audio

Realtek® ALC887 VD2-GR Codec
Compliant with Azalia 1.0 specs

■

■

Graphics

Onboard graphics integrated in Intel® HD Graphics■

Back
Panel I/O
& Connec­tors/Pin­headers

Back Panel I/O

1 PS/2 mouse port
1 PS/2 keyboard port
1 VGA port
1 HDMI port
2 DVI-D ports
4 USB 2.0 ports
2 Gigabit LAN jacks

3 exible audio ports

■

-

-

-

-

-

-

-

-

Onboard Connectors/Pinheaders

2 USB 2.0 pinheaders (4 ports)
4 serial port connectors
1 serial port power jumper
2 SATA 6Gb/s + 2 SATA 3Gb/s connectors
2 SATA power connectors
1 front panel pinheader
1 chassis intrusion connector
1 GPIO connector
1 LVDS connector
1 LVDS power jumper

1 amplier pinheader

■

-

-

-

-

-

-

-

-

-

-

-

1-3

MS-9887

Slot

1 CFast slot
1 Mini PCI Express x 1 slot
1 32-bit 33/66MHz 3.3v PCI slot

■

■

■

Form Fac­tor

Mini-ITX: 17.0cm x 17.0cm■

Environ­mental

Operating Temperature: -10oC to 60oC
Storage Temperature: -20oC to 80oC
Humidity: 0% ~ 95% RH, Non-Condensing

■

■

■

1-4

Overview

▍

Mainboard Layout

Mouse

Port

DVI-D Port

HDMI Port

LAN Ports

USB 2�0 Ports

Line-In

D-Sub Port

Line-Out

MIC

Keyboard

Port

DVI-D Port

Power
Connector

GPIO Connector

Top:

LAN J ac k

Bot to m:

USB 2 .0 po rt s

Top:

LAN J ac k

Bot to m:

USB 2 .0 po rt s

T:M:B:
Lin e- In

Lin e- Ou t

Mic

Top : mou se

Bot to m:

key bo ar d

Top: VG A p or t

Bot to m: HD MI po rt

Top:D VI -D po rt

Bot to m: DV I- D por t

JAM P1

JUS B2

JFP 1

J2

J_M E1

JDS W1

JCA SE1

JGP IO1

JLVD S1

JSATA_ PW R1

JSATA_ PW R2

JUS B1

SATA3

SATA4

SATA1

SATA2

COM 4

COM 2

COM 3

COM 1

PCI 1

DIM M1

DIM M2

JSP I1

SYS FAN1

CPU FAN1

Min i PCI Ex pre ss Slo t

Cod ec

Int el

QM6 7

Sup er I/ O

Chi pse t

PCI Slot

COM2~4 Power­Connector

LVDS Power
Connector

SATA Con­nectors

DIMM Slots

Back Panel

Front Panel
Connector

USB Con­nectors

Ch a s s is Intru ­sion Connector

LVDS Connector

Serial Port
Connectors

System Fan & CPU
Connectors

SATA Power
Connectors

Mini PCI Express Slot

CPU

Audio power am-

plier Connector

JME Connector

JSPI1 Connector

1-5

MS-9887

CFa st S lo t

CFast Slot

This chapter provides you with the information on

mainboard hardware congurations. Incorrect setting

of jumpers and connectors may damage your main­board. Please pay special attention not to connect
these headers in wrong direction. DO NOT adjust any
jumper while the mainboard is powered on.

Chapter 2

Hardware Setup

2-2

Hardware Setup

▍

Quick coMponentS Guide

JGPIO1, p2-12

PCI Slot, p.2-17

JDSW1, p.2-16

J2, p.2-16

JPWR1, p.2-6

SATA1~4,

p.2-9

DIMM Slot, p.2-5

Back Panel

I/O, p.2-7

JFP1, p.2-11

CPUFAN1/SYSFAN1,

p.2-10

JUSB1/2,

p.2-12

JCASE1, p.2-9

JLVDS1, p.2-11

COM1/2,

p.2-13

JAMP1, p.2-15

JSATA_PWR1/2,

p.2-10

Mini PCI Express
Slot, p.2-17

CPU, p.2-3

J_ME1, p.2-14

JSPI1, p.2-14

Top:

LAN J ac k

Bot to m:

USB 2 .0 po rt s

Top:

LAN J ac k

Bot to m:

USB 2 .0 po rt s

T:M:B:
Lin e- In

Lin e- Ou t

Mic

Top : mou se

Bot to m:

key bo ar d

Top: VG A p or t

Bot to m: HD MI po rt

Top:D VI -D po rt

Bot to m: DV I- D por t

JAM P1

JUS B2

JFP 1

J2

J_M E1

JDS W1

JCA SE1

JGP IO1

JLVD S1

JSATA_ PW R1

JSATA_ PW R2

JUS B1

SATA3

SATA4

SATA1

SATA2

COM 4

COM 2

COM 3

COM 1

PCI 1

DIM M1

DIM M2

JSP I1

SYS FAN1

CPU FAN1

Min i PCI Ex pre ss Slo t

Cod ec

Int el

QM6 7

Sup er I/ O

Chi pse t

2-3

MS-9887

cpu (centraL proceSSinG unit)

When you are installing the CPU, make sure that you install the cooler
to prevent overheating. If you do not have the CPU cooler, consult your
dealer before turning on the computer.

Important

Overheating
Overheating will seriously damage the CPU and system. Always make

sure the cooling fan can work properly to protect the CPU from overheat­ing. Make sure that you apply an even layer of thermal paste (or thermal
tape) between the CPU and the heatsink to enhance heat dissipation.

Replacing the CPU
While replacing the CPU, always turn o󰘯 the power supply or unplug the

power supply’s power cord from the grounded outlet 󰘰rst to ensure the
safety of CPU.

2-4

Hardware Setup

▍

CPU Installation

Locate the CPU socket on the mainboard. On the upper end of the
CPU socket is a socket actuator in the form of a slotted screw head.
Make sure that you open or close the socket with a 󰘱athead screw­driver before and after installing the CPU.

Turn the socket actuator counterclockwise to open the socket. Lo­cate the golden arrow on the CPU and align it to the upper right
corner of the socket. Put the CPU gently down. If the socket is com­pletely opened, the CPU pins will securely 󰘰t into the socket.

1.

2.

Turn the socket actuator clockwise to close the socket.3.

Important

Mainboard photos shown in this section are for demonstration only and
may di󰘯er from the actual look of your mainboard.

2-5

MS-9887

MeMory

These DIMM slots are intended for memory modules.

Installing Memory Modules

Locate the DIMM1 SO-DIMM slot. Align the notch on the DIMM with
the key on the slot and insert the DIMM into the slot at 45-degree
angle.

Push the DIMM gently forwards until the slot levers click and lock
the DIMM in place. Follow the same procedures to install the second
DIMM if necessary.

To uninstall the DIMM, 󰘱ip the slot levers outwards and the DIMM
will be released instantly.

Important

You can barely see the golden 󰘰nger if the DIMM is properly inserted
in the DIMM slot.

To enable successful system boot-up, always insert the DIMM into
the DIMM1 󰘰rst.

1.

2.

3.

•

•

DDR3 SO-DIMM Slot 204-pin

2-6

Hardware Setup

▍

Power Connector: JPWR1

This connector provides power to the mainboard.

4. 19~ 2 5V

2

.G rou n d

3. 19~ 2 5V

1

.G rou n d

power SuppLy

2-7

MS-9887

back paneL i/o

Keyboard Port

The standard PS/2 keyboard DIN connector is for a PS/2 keyboard.

Mouse Port

The standard PS/2 mouse DIN connector is for a PS/2 mouse.

D-Sub Port

The DB15-pin female connector is provided for monitor.

HDMI Port

The High-Denition Multimedia Interface (HDMI) is an all-digital audio/

video interface capable of transmitting uncompressed streams. HDMI

supports all TV format, including standard, enhanced, or high-denition

video, plus multi-channel digital audio on a single cable.

DVI-D Port

The DVI-D (Digital Visual Interface-Digital) connector allows you to con­nect an LCD monitor. It provides a high-speed digital interconnection be­tween the computer and its display device. To connect an LCD monitor,
simply plug your monitor cable into the DVI connector, and make sure that
the other end of the cable is properly connected to your monitor (refer to
your monitor manual for more information.)

USB Port

The USB (Universal Serial Bus) port is for attaching USB devices such as
keyboard, mouse, or other USB-compatible devices.

▶

▶

▶

▶

▶

▶

Mouse

Port

DVI-D Port

HDMI Port

LAN Ports

USB 2�0 Ports

Line-In

D-Sub Port

Line-Out

MIC

Keyboard

Port

DVI-D Port

2-8

Hardware Setup

▍

LAN Port

The standard RJ-45 LAN jack is for connection to the Local Area Network
(LAN). You can connect a network cable to it.

Speed IndicatorActivity Indicator

Left LED Right LED

Active LED 100M/1000M Speed LED

LED Color Yellow Green/Orange

10M Cable
Plug-in

No Transmission OFF OFF

Transmission Yellow (Blinking) OFF

100M Cable
Plug-in

No Transmission OFF Green (Lighting)

Transmission Yellow (Blinking) Green (Lighting)

1000M Cable
Plug-in

No Transmission OFF Orange (Lighting)

Transmission Yellow (Blinking) Orange (Lighting)

In S3/S4/S5 Standby State OFF OFF

Audio Ports

These audio connectors are used for audio devices. It is easy to differenti­ate between audio effects according to the color of audio jacks.

Line-Out (Green) - Line Out, is a connector for speakers or
headphones.

Line-In (Blue) - Line In, is used for external CD player, tapep­layer or other audio devices.

Mic (Pink) - Mic, is a connector for microphones.

▶

▶

■

■

■

2-9

MS-9887

connector

Chassis Intrusion Connector: JCASE1

This connector is provided to connect the chassis intrusion switch cable.
If the chassis is opened, the chassis intrusion mechanism will be acti­vated. The system will record this status and show a warning message
on the screen. To clear the warning, you must enter the BIOS utility and
clear the record.

1

.

C

I

N

T

R

U

2

.

G

r

o

u

n

d

Serial ATA Connector: SATA1 ~ SATA4

This connector is a high-speed Serial ATA interface port. Each connector
can connect to one Serial ATA device.

Important

Please do not fold the Serial ATA cable into 90-degree angle. Otherwise,
data loss may occur during transmission.

2-10

Hardware Setup

▍

Fan Power Connector: CPUFAN1 / SYSFAN1

The fan power connectors support system cooling fan with +12V. When
connecting the wire to the connectors, always note that the red wire is the
positive and should be connected to the +12V; the black wire is Ground
and should be connected to GND. If the mainboard has a System Hard­ware Monitor chipset on-board, you must use a specially designed fan
with speed sensor to take advantage of the CPU fan control.

1

.

G

r

o

u

n

d

2

.

+

1

2

V

3

.

S

e

n

s

o

r

Important

Please refer to the recommended CPU fans at processor’s ofcial

website or consult the vendors for proper CPU cooling fan.

Fan cooler set with 3- or 4-pin power connector are both available
for CPUFAN1.

SATA Power Connector: JSATA_PWR1 /2

The connector provides the power to the SATA device.

4. +12 V

3

.G rou n d

2

.G rou n d

1. 5V

•

•

2-11

MS-9887

LVDS Flat Panel Connector: JLVDS1

The LVDS (Low Voltage Differential Signal) connector provides a digital

interface typically used with at panels. After connecting an LVDS inter­faced at panel to the JLVDS1, be sure to check the panel datasheet and

set the J2 jumper for proper power voltage.

39.G N

D

27.G N

D

25

.

LV

DS1_ DA

TA

3 N

23.
LV

DS1_ CK

N

21.
LV

DS1_ DA

TA

2 N

19.
LV

DS1_ DATA

1 N

17.
LV

DS1_ DA

TA0 N

15.B ackli gh t

E

nabl e

13.B ackli gh t

C

ontr o

l

11

.

LDDC _CLK

9.LC D_VDD

7.+3 .3

V

5.+1 2V

3.+1 2V

1.+1 2V

40.G N

D

28.G N

D

26

.

LV

DS1_ DA

TA

3 P

24.
LV

DS1_ CK

P

22.
LV

DS1_ DATA

2 P

20.
LV

DS1_ DA

TA

1 P

18.
LV

DS1_ DA

TA

0 P

16.G ND

14.
LV

DS_V DDE

N

12.L DDC_D A

TA

10.L CD_VD D
8

.GN

D

6

.GN

D

4.+1 2V

2.+1 2V

37

.

LV

DS2_ DA

TA

3 N

35.
LV

DS2_ CK

N

33.
LV

DS2_ DATA

2 N

31.
LV

DS2_ DATA

1 N

29.
LV

DS2_ DA

TA0 N

38.

LV

DS2_ DA

TA

3 P

36.
LV

DS2_ CK

P

34.
LV

DS2_ DATA

2 P

32.
LV

DS2_ DATA

1 P

30.
LV

DS2_ DATA

0 P

Front Panel Connectors: JFP1

These connectors are for electrical connection to the front panel switches
and LEDs. The JFP1 is compliant with Intel® Front Panel I/O Connectivity
Design Guide.

1.
+

3.

-

10 . No

Pi

n

5.

­Re s et S

wi t ch

HD D LE

D

P

ow e r

S

wi t ch

P

ow e r LE

D

7.
+

9. R eser ve

d

8.

-

6.
+

4.

-

2.
+

2-12

Hardware Setup

▍

Front USB Connector: JUSB1 / JUSB2

This connector, compliant with Intel I/O Connectivity Design Guide, is
ideal for connecting high-speed USB interface peripherals such as USB
HDD, digital cameras, MP3 players, printers, modems and the like.

1. VC
C

3. USB0

-

10 .NC

5. USB0

+

7

.G roun d

9. No
Pi

n

8

.G roun d

6. USB1

+

4. USB1

-

2. VC
C

Important

Note that the pins of VCC and GND must be connected correctly to avoid
possible damage.

GPIO Connector: JGPIO1

This connector is provided for the General-Purpose Input/Output (GPIO)
peripheral module.

10.N_GPO

3

8.N_GPO

2

12.No

Pi

n

6.N_GPO

1

4.N_GPO

0

2.5V
Output

1.3.3V

Output

3.N_GPI

0

5.N_GPI

1

7.N_GPI

2

9.N_GPI

3

11

.GN

D

2-13

MS-9887

Serial Port Connector: COM1 (RS-232/-422/-485)
Serial Port Connector: COM2~4 (RS-232)

This connector is a 16550A high speed communications port that sends/
receives 16 bytes FIFOs. You can attach a serial device to it through an
optional serial port bracket.

8.CT
S

3

.TX

D

1.DC D

6.DS
R

5.GN
D

4.DT
R

7.
RT

S

2.RX
D

9.VC C_CO

M

RS-232

PIN SIGNAL DESCRIPTION

1
2
3
4
5
6
7
8
9

DCD
RXD
TXD
DTR
GND
DSR
RTS
CTS
VCC_COM

Data Carrier Detect
Receive Data
Transmit Data
Data Terminal Ready
Signal Ground
Data Set Ready
Request To Send
Clear To Send
Power Source

RS-232

RS-422

8. NC

3

.T X

+

1

.T X

-

6. NC

5

.G N

D

4. RX

-

7. NC

2. RX
+

9. NC

PIN SIGNAL DESCRIPTION

1
2
3
4
5
6
7
8
9

422 TXD­422 RXD+
422 TXD+
422 RXD­GND
NC
NC
NC
NC

Transmit Data, Negative
Receive Data, Positive
Transmit Data, Positive
Receive Data, Negative
Signal Ground
No Connection
No Connection
No Connection
No Connection

RS-422

RS-485

8. NC

3. DA
TA

+

1. DA
TA

-

6. NC

5

.G N

D

4. NC

7. NC

2. NC

9. NC

PIN SIGNAL DESCRIPTION

1
2
3
4
5
6
7
8
9

485 TXD­NC
485 TXD+
NC
GND
NC
NC
NC
NC

Transmit Data, Negative
No Connection
Transmit Data, Positive
No Connection
Signal Ground
No Connection
No Connection
No Connection
No Connection

RS-485

2-14

Hardware Setup

▍

J_ME1 Connector: J_ME1

This connector is provided for setting ME rmware update.

JSPI1 Connector: JSPI1

This connector is provided for engineer debug only.

Enable

Disable

J_ME1

1

1

1

2-15

MS-9887

JuMper

Audio Amplier Connector: JAMP1

The JAMP1 is used to connect audio ampliers to enhance audio per­formance.

1

PIN SIGNAL

1
2
3
4

AMP_L­AMP_L+
AMP_R­AMP_R+

2-16

Hardware Setup

▍

Serial Port Power Jumper: J2

This jumper species the operation voltage of the onboard serial ports.

Important

Avoid adjusting the jumper when the system is on; it will damage the
mainboard.

LVDS Power Jumper: JDSW1

Use this jumper to specify the LVDS power.

Important

Avoid adjusting the jumper when the system is on; it will damage the
mainboard.

5V

12V

J1

3.3V

5V

J2

1

1

1

1

1

1

2-17

MS-9887

SLot

Mini PCI (Peripheral Component Interconnect) Ex­press Slot

The mini PCI Express slot supports the mini PCI Express interface expan­sion card such as wireless LAN, TV tuner, and Robson NAND Flash.

Mini PCI-E Slot

32-bit PCI Slot

PCI (Peripheral Component Interconnect) Slot

The PCI slot supports LAN card, SCSI card, USB card, and other add-on

cards that comply with PCI specications.

Important

When adding or removing expansion cards, make sure that you unplug

the power supply rst. Meanwhile, read the documentation for the expan­sion card to congure any necessary hardware or software settings for
the expansion card, such as jumpers, switches or BIOS conguration.

CFast Slot

This socket supports CompactFlash cards.