Mr Beams MB750 User Manual
Installation Instructions
Wireless Motion Sensor LED Stand Anywhere Light
MB750
Thank you for purchasing the Mr Beams
Stand Anywhere Light. We are committed to
eliminating darkness using the latest in
Light-Emitting Diodes (LEDs). LEDs are the most
ecient and durable light sources available. We
are certain that your light will contribute to a safer
®
Tips:
•
Use only new alkaline AA- Cell batterie s with 1.5V rating.
•
Do not mix old and new batteries. If batteries a re not new, it may cause the light to malfunction.
•
Install batteries with polarity in correct position.
•
Light may activate when batte ries are inser ted. Simply take light into a dark room. Allow
batteries to set tle, then test activation.
•
If your light will not turn o, it means that it is time to replace the batteries.
environment and provide light where you need it at
a very reasonable cost.
What is included per light:
• Wireless LED Stand Anywhere Light
LED Light
What you need to install:
• 4 AA-Cell Alkaline Batteries (per light)
Stand Anywhere Light Features:
Motion/Light Sensor: Light instantly turns on when it
detects motion from up to 15 feet away. The light sensor
conserves battery life by preventing the light from
activating in daylight.
Auto Shut-o: Stick Anywhere Light shuts o
automatically after 20 seconds if no motion is detected.
Bright LED: 20 Lumens covers up to 20 sq ft.
NOTE: Light sensor only allows light to activate in darkness. We recommend you test in a dark room or closet.
Motion & L ight
Sensor
1. To open bat tery compartment, locate
the lid on the bottom of the light.
4. Inser t 4 AA-cell batteries with cor rect
polarity. Make sure the at ends of the
batteries are against the springs.
Battery Caution:
1) Do not mix ol d and new ba tteries
2) Do not mix Alkaline, Standard (Carbon-Zin c) or Rech argea ble (Nic kel Cadmi um)
or (Nic kel Metal Hydride) b atter ies
3) Do not di spose of b atteries in re
4) Batte ries should be re cycled or dispos ed of as per state and l ocal guidelines
www.mrbeams.com
2. Twist the lid counterclockwise to unlock.
5. Once the batteries have been inserted,
replace the lid by lining up the arrows and
turning until the arrow is pointing towards
the lock symbol.
3. Lift the lid o the bottom of the light and
use your thumb to open the batte ry door.
6. Test the motion sensor in a dark closet or bathroom.
Leave the light in the dark room for up to 5 minute s.
When you re-enter the room, the light should activate
with motion.
* Visit our website to view installation video.
* 1 year limited warranty. Visit site for details.
32333 Au rora Rd. S uite 100, Sol on, OH 44139
877.298.9082
Loading...