Installation Instructions
UltraBright Path Light
MB590
Thank you for purchasing the Mr Beams® UltraBright Path Light. We are committed to eliminating darkness using the latest in Light-
Emitting Diodes (LEDs). LEDs are the most efficient and durable light sources available. We are certain that your light will contribute to a safer environment and provide light where you need it at a very reasonable cost.
What is included:
•2 Motion Sensor Path Lights
•2 Stakes
What you need to install:
•4 C-Cell Alkaline Batteries
(per light)
Path Light Features:
Motion/Light Sensor: The Path Light instantly turns on when it detects motion from up to 10 feet away. The light sensor conserves battery life by preventing the light from activating in daylight.
Auto Shut-off: Path Light shuts off automatically after 30 seconds if no motion is detected.
Bright LED: 80 Lumens covers up to 180 sq ft.
Durable, Weather Resistant: Tight seals and UV resistant material allow the light to work in all weather conditions.
Tips:
•Use only new alkaline C-Cell batteries with 1.5V rating.
•Do not mix old and new batteries. If batteries are not new, it may cause the light to malfunction.
•Install batteries with polarity in correct position.
•Light may activate when batteries are inserted. Simply take light into a dark room, allow batteries to settle, then test activation.
•If your light will not turn off, it means that it is time to replace the batteries.
LED Light |
|
Cover |
Motion & Light |
|
|
|
Sensor |
Battery
Compartment
Stake 
NOTE: Light sensor only allows light to activate in darkness. We recommend you test in a dark room or closet.
Battery Installation
1. Remove light |
2. Twist head of light |
3. Separate |
4. Insert 4 C-Cell batteries |
5. Re-insert battery |
6. Twist head of light clockwise |
from package. |
counter clockwise until |
battery |
into battery compartment. |
compartment into cover. |
until it clicks into place. Align |
|
it clicks out of place. |
compartment |
Make sure flat ends match |
Match arrows for proper |
lock with arrow when closing |
|
|
from cover. |
up with springs. |
placement. |
to ensure the unit is sealed for |
|
|
|
|
|
weatherproof operation. |
Mounting with Stake
1. Use the arrow indicator on the |
2. Gently hammer stake into |
top of the stake to determine the |
desired location with light |
direction of light after installation. |
direction arrow pointing to path. |
3. Slide light cover into |
4. Twist cover counter |
5. When installing multiple lights, ensure |
stake. |
clockwise until it locks |
that there is proper distance between |
|
into place. |
the lights to enable light sensor. |
Battery Caution:
1)Do not mix old and new batteries
2)Do not mix Alkaline, Standard (Carbon-Zinc) or Rechargeable (Nickel Cadmium) or (Nickel Metal Hydride) batteries
3)Do not dispose of batteries in fire
4)Batteries should be recycled or disposed of as per state and local guidelines
www.mrbeams.com
*Visit our website to view installation video.
*1 year limited warranty. Visit site for details.
600 Beta Drive, Unit 100, Mayfield Village, OH 44143
877.298.9082
Loading...