Mr Beams MB723, MB720 User Manual

0 (0)
Installation Instructions
Wireless Motion Sensor LED Stick Anywhere Light
MB720-723
Thank you for purchasing the Mr. Beams
TM
Stick Anywhere Light. We are committed to
eliminating darkness using the latest in
Light-Emitting Diodes (LEDs). LEDs are the most ecient and durable light sources available. We
are certain that your light will contribute to a safer environment and provide light where you need it at a very reasonable cost.
What is included per light:
• Wireless LED Stick Anywhere Light
• 2 Screws & Double Sided Tape
• Mounting Bracket
What you need to install:
• 1 Small Screwdriver
• 4 AA-Cell Alkaline Batteries (per light)
Stick Anywhere Light Features:
Motion/Light Sensor: Light instantly turns on when it detects motion from up to 15 feet away. The light sensor conserves battery life by preventing the light from activating in daylight.
Auto Shut-off: Stick Anywhere Light shuts o
automatically after 30 seconds if no motion is detected. Bright LED: 10 Lumens covers up to 10 sq ft.
Tips:
Use only new alkaline AA-Cell batteries with 1.5V rating.
Do not mix old and new batteries. If bat teries are not new, it may cause the light to malfunction.
Install batteries with polarity in correct position.
Light may activate when batteries are inser ted. Simply take light into a dark room. Allow
batteries to settle, the n test activation.
If your light will not turn o, it means that it is time to replace the bat teries.
Motion & L ight
Sensor
LED Light
NOTE: Light sensor only allows light to activate in darkness. We recommend you test in a dark room or closet.
1. Remove mounting bracket from back of light. Remove battery door by turning 2 thumb screws counter clockwise.
4. Mount bracket to wall with double sided tape, holding for 10 seconds or install with 2 small screws. Note: This is a strong adhesive that may cause damage to mounting surface. Please consider your location before mounting.
2. Inser t 4 Fresh A A alkaline batteries.
5. Slide light onto mounting bracket attached to wall.
3. Close batter y door and replace
thumb screws.
* Visit our website to view installation video. * 1 year limited warranty. See enclosed card for details.
www.mrbeams.com
877.298.9082
Loading...