Mr Beams MB700 User Manual

Installation Instructions
Wireless Motion Sensor LED Mini Stick Anywhere Light
MB700
Thank you for purchasing the Mr Beams
Mini Stick Anywhere Light. We are committed to
eliminating darkness using the latest in
Light-Emitting Diodes (LEDs). LEDs are the most ecient and durable light sources available. We
are certain that your light will contribute to a safer
®
Tips:
Use only new alkaline AA A-Cell batteries with 1.5V rating.
Do not mix old and new batteries. If bat teries are not new, it may cause the light to malfunction.
Install batteries with polarity in correct position.
Light may activate when batteries are inser ted. Simply take light into a dark room. Allow
batteries to settle, the n test activation.
If your light will not turn o, it means that it is time to replace the bat teries.
environment and provide light where you need it at a very reasonable cost.
What is included per light:
• Wireless LED Mini Stick Anywhere Light
• 2 Screws & Double Sided Tape
• Mounting Bracket
LED Light
What you need to install:
• 1 Small Screwdriver
• 4 AAA-Cell Alkaline Batteries (per light)
Stick Anywhere Light Features:
Motion/Light Sensor: Light instantly turns on when it detects motion from up to 15 feet away. The light sensor conserves battery life by preventing the light from activating in daylight.
Auto Shut-o: Stick Anywhere Light shuts o
automatically after 20 seconds if no motion is detected. Bright LED: 15 Lumens covers up to 10 sq ft.
NOTE: Light sensor only allows light to activate in darkness. We recommend you test in a dark room or closet.
Motion & L ight
Sensor
1. Remove mounting bracket from back of light by sliding face of light down.
3. Install back of unit by screwing mounting bracket to desired location.
Battery Caution:
1) Do not mix ol d and new ba tteri es
2) Do not mix Alkali ne, Stan dard (Ca rbon-Zinc) or Rec harge able (Nickel Cad mium) or (Nic kel Meta l Hydride) batter ies
3) Do not di spose of batter ies in re
4)Batteries s hould be r ecycle d or disp osed of as p er state and loca l guide lines
www.mrbeams.com
2. Inser t 4 Fresh A AA alkaline batteries.
4. To nish installing light, slide face of light into
mounted bracket.
* Visit our website to view installation video.
* 1 year limited warranty. Visit site for details.
877.298.9082
Loading...