Mr Beams MB330, MB371, MB360 User Manual

Wireless Motion Sensor LED Spotlight

Light Sensor Removal Instructions

MB330/360/371

Important:

Before you begin, these instructions are for customers who nd there is ambient light in the desired location that pre­vents their light from activating. Once the sensor is removed, your light will activate, regardless of surrounding lights.
Battery life will decrease once the sensor is removed, because light will activate more often. Please note that once the

sensor is removed, your warranty is void. We appreciate your interest in our products and are more than happy

to help you customize your light for your specic need. Please call or email any questions to our customer service.
Phone: [phone] Email: [e-mail]

1. Remove front cover of Spotlight by rotating
counter-clockwise as shown above. Pull face
out from cup to reveal battery compartment.

Light Sensor

2. Remove the six screws on the
inside of the face of the Spotlight with
a small screwdriver.

3. Pull the face apart from the battery compartment.
Locate the light sensor as shown in the illustration. The
light sensor can be removed with needle nose pliers,
gently twisting until it detaches from unit.

4. Replace battery compartment into face of the light.
Screw six screws securely and twist back to base of
light. See your user manual for installation instructions.

www.mrbeams.com

32333 Au rora Rd. Suite 100 So lon, OH 4 4139

877.298.9082