Moultrie Pro Hunter II User manual
Instructions for Pro Hunter II Feeder Kit
7
8
THANK YOU for your purchase of a Moultrie Pro Hunter II Feeder Kit. Please read this sheet before
operating the unit. If you should have any questions about this product or any other Moultrie product,
please contact us at www.moultriefeeders.com/support. Allow us to better serve you by
activating your 1-year warranty online at http://www.moultriefeeders.com/warranty
A
CONFIGURING AND TESTING FEEDER
SET CURRENT TIME: Press the PROGRAM button and SET CURRENT TIME will appear. Press UP or DOWN to set the
hour, then press RIGHT to go to the minutes. Press UP or DOWN to set the minutes. Press the BACK button to return
to the Main Menu , or press PROGRAM to proceed through the settings.
NOTE: The timer is capable up to 10 feed times, each 1-60 seconds each, and each can operate on any day of
the week where each day can be toggled ON/OFF.
SET CURRENT DAY: Press the PROGRAM button until the Set Current Day screen appears. Press LEFT or RIGHT to
select the current day. Press BACK to return to the Main Menu, or press PROGRAM to proceed through the settings.
SET EST. FEED REMAINING: Press the PROGRAM button until the Est. Feed Remaining screen appears. Press UP or
DOWN to select the amount of feed you have in the feeder. Press BACK to return to the Main Menu, or press
PROGRAM to proceed through the settings.
SET FEED TIME: Press the PROGRAM button until the desired Feed Timer appears at the top of the screen. Press the
DOWN button until the feed time is ashing. Press PROGRAM to enter edit mode. Press UP or DOWN to set the hour.
Press the RIGHT button to go over to the minutes. Press UP or DOWN to set the minutes. Press PROGRAM or BACK to
return to the Feed Timer. The factory settings include two feeder times 7am and 6pm, each for 6 seconds.
Full Battery
Empty Battery
SET DAYS OF THE WEEK: After setting the feed time, press UP so the days of the week start ashing. Press PROGRAM
to enter edit mode. By default all days should be enabled. Press LEFT or RIGHT to highlight the desired day. Press
DOWN to disable the selected day. Press UP to re-enable the selected day. Once all desired days are selected, press
PROGRAM or BACK to return to the Feed Timer.
SET RUN DURATION: Press DOWN and LEFT until the RUN DURATION seconds are ashing. Press PROGRAM to enter
edit mode. Press UP or DOWN to set desired feed duration. Press PROGRAM or BACK to return to the Feed Timer.
SET MOTOR SPEED: Press UP or DOWN until the motor speed setting is ashing at the bottom of the screen. Press
7
PROGRAM to enter edit mode. Press RIGHT or LEFT to select the desired motor setting. Press PROGRAM or BACK to
return to the Feed Timer.
When the Feed Timer is blinking at the top of the screen, press PROGRAM or RIGHT to advance to the next feed
timer. Repeat for all required feed times.
TEST FEEDER: Press the BACK button to reach the Main Menu. Press the TEST button to enter the Test Mode. The
8
Test duration will appear (this will be the same as the duration as Feed Timer 1). Press UP or DOWN to set the Test
Duration. Press PROGRAM. Press RIGHT or LEFT to select desired motor speed. Press PROGRAM to perform test.
After a 5 second countdown, the test will commence.
FCC COMPLIANCE
This dev ice compli es with par t 15 of the FCC Rule s. Operat ion is subje ct to the fo llowing t wo conditi ons: (1) This devi ce may not cau se harmfu l interfe rence, and (2) th is device mu st accept an y interfe rence rece ived, incl uding inte rferenc e that may cau se undesir ed operat ion.
For devi ces approv ed under Par t 15, the user ’s manual or ins tructi on manual fo r an intentio nal or unint entional r adiator sh all cautio n the user ab out change s or modic ations to th e device (Se ction 15.21).
NOTE: Thi s equipme nt has been te sted and fo und to compl y with the li mits for a Cl ass B digita l device, pu rsuant to pa rt 15 of the FCC Ru les. Thes e limits are d esigned t o provide re asonable p rotect ion agains t harmful i nterfer ence in a resi dential in stallati on. This eq uipment
genera tes, uses an d can radia te radio fr equency e nergy and, i f not insta lled and use d in accorda nce with th e instruc tions, may c ause harm ful inter ference t o radio comm unicatio ns. Howeve r, there is no gua rantee tha t interfe rence will n ot occur in a pa rticul ar install ation.
If this eq uipment do es cause ha rmful int erfere nce to radio o r televisio n recepti on, which ca n be determ ined by turn ing the equ ipment o an d on, the user i s encourag ed to try to co rrect t he interf erence by on e or more of the f ollowing m easures:
– Reorie nt or reloc ate the rece iving ante nna.
– Increa se the sepa ration be tween the e quipment a nd receive r.
– Connec t the equip ment into an o utlet on a ci rcuit di erent fro m that to whic h the receiv er is connec ted.
– Consult t he dealer or a n experi enced radi o/TV tec hnician fo r help.
If mounting the Moultrie Quick Lock Feeder Kit to:
STOP
READ THIS FIRST
BEFORE
PROCEEDING
MFG-13448_Pro Hunter II_2020 Manual-ENGLISH_12-7-20_FINAL.indd 1MFG-13448_Pro Hunter II_2020 Manual-ENGLISH_12-7-20_FINAL.indd 1 12/7/20 10:46 AM12/7/20 10:46 AM
• a Moultrie 30 or 55-gallon barrel* or Moultrie 6.5-gallon bucket, refer to Section C.
• a Moultrie 30-Gallon Quick-Lock Hopper, refer to Section D.
• any other containers, please visit our website at www.moultriefeeders.com
B
ADJUSTING FUNNEL HEIGHT
To adjust funnel height:
With a Phillips-head screwdriver,
loosen screw.
With screw loosened, use tabs to position funnel
in one of the two positions by either pushing
down or up depending on desired position.
Once the funnel is in desired position,
retighten the screw with Phillips-head
screwdriver. Do not overtighten.
C
ASSEMBLE WITH MOULTRIE QUICK-LOCK ADAPTER
55-Gallon or 30-Gallon Barrel*
Assemble Quick-Lock adapter by snapping bolt tabs in place as shown.
Turn the metal drum upside down and slide the belly band ring
around perimeter and make sure that belly band is snug against
the bottom structure ring as shown (Moultrie barrel only).
Slide the bolt through the belly band ring, spacer and
lock washer as shown. Tighten nut on bolt until metal
belly band ring tabs are touching spacer on each side.
Mount Quick-Lock adapter using (3) 1/4” x 1” bolts, nuts and
washers provided in the pre-drilled holes (Moultrie barrel only).
Or use the Quick-Lock adapter as a template to mark and drill
the mounting holes (non-Moultrie barrel).
Bolt Tabs
Assembled
Quick-Lock
Adapter
Connect Quick-Lock feeder kit to assembled adapter as shown.
*Can also be used on a 6.5-gallon bucket.
Belly Band
Ring
Bolt
Spacer
Lock
Washer
Nut
Quick-Lock
Adapter
Belly Band
Ring
DO NOT EXCEED 200 LBS
OF FEED IN 30-GAL FEEDERS
Quick-Lock
Feeder Kit
1
DO NOT EXCEED 400 LBS
OF FEED IN 55-GAL FEEDERS
1
2
ALIGN LUGS AND
L-SLOTS
NOTE: DO NOT LOAD FEEDER until it is standing up and in place (see Section D-4).
MFG-13448_Pro Hunter II_2020 Manual-ENGLISH_12-7-20_FINAL.indd 2MFG-13448_Pro Hunter II_2020 Manual-ENGLISH_12-7-20_FINAL.indd 2 12/7/20 10:46 AM12/7/20 10:46 AM
Loading...