Page 1
CAMERA OVERVIEW
I
Page 1
A-5/A-8 Digital Game Camera
Our Service Department will gladly answer any questions you
have. Call 800-653-3334, Monday - Friday, 8:00 AM to 5:00 PM CST.
www.moultriefeeders.com
10172013 • MCG-12589 / MCG-12646
Instructions for A-5/A-8
Digital Game Camera
THANK YOU for your purchase of the A-5/A-8 Digital Game Camera. Please read this
booklet before using the unit. If you should have any questions about this product or
any other Moultrie product, please contact us using the information on the back of
this booklet. Please register your camera at www.moultriefeeders.com/warranty
to activate your 1-year warranty.
FRONT VIEW
BOTTOM VIEW
Status Indicator LED
LCD Display
LED Flash
OFF / IR AIM / SETUP / AUTO
Select / Wakeup Button
Enter Button
Up / Down Buttons
1/4” 20 Mount
Battery Chamber
Mini USB
Port
SD Card Slot
Camera Lens
Battery Indicator LED
Motion Sensor
SIDE VIEW
External Power Port
Page 2
OFF/ IR AIM / SETUP / AUTO
IR AIM - When IR Aim is ON and the PIR Sensor detects motion, the Status LED on the front of the
camera will intermittently ash and then shut o.
Setup position selects the camera setup main screen. While in this screen, pressing the select button
will take you to the dierent categories of setup (time, date, clear, and camera ID number).
Select/Wakeup, Enter, Up/Down Buttons
The SELECT button scrolls through options. The ENTER button selects the item to be changed and
lock in the set value. The UP and DOWN buttons are used to change the values of the options.
Battery Compartment
The camera is powered by 4 C-cell alkaline batteries. Be sure to align batteries in the way depicted
on the engraved battery diagrams inside the battery compartment. This will ensure proper polarity.
Note: only use alkaline batteries, the use of any other type battery may damage the camera.
SD Card Slot
Accepts up to a 32GB SD card for photo and video storage.
NOTE: An SD Card must be installed for the camera to operate (sold separately).
USB PORT
Download still pictures and video onto your computer by connecting a mini USB cable (not included)
to the mini USB port.
EXTERNAL POWER PORT
Accepts the Moultrie Power Panel® or Moultrie Battery Box accessories (sold separately) only.
Refer to www.moultriefeeders.com for more information.
NOTE: The use of any other power source will void your warranty and possibly harm your camera.
BATTERY STATUS LED
This LED will light up and remain lit when 25% of battery life remains.
CAMERA OVERVIEW (cont)
I
Page 2
A-5/A-8 Digital Game Camera
Page 11
A-5/A-8 Digital Game Camera
Important Battery lnformation
- Only use alkaline batteries. We recommend the use of Duracell or Energizer batteries.
- Do not mix old and new batteries. Always replace ALL the batteries at the same time.
- When the camera is not in use, please remove the batteries.
Moultrie Limited Warranty
This product has been thoroughly tested and inspected before shipment. It is guaranteed from
defects in material and workmanship from the date of purchase for 1 year. Under this limited
guarantee we agree to replace or repair free of charge any part or parts which have been found to
be defective in original material or workmanship. Should you require in-warranty service, call our
Customer Service Department. If your problem cannot be addressed over the telephone, we may
need you to send us your defective product plus proof of purchase.
You must register your camera at www.moultriefeeders.com/warranty to activate
your 1-year warranty.
IMPORTANT INFORMATION
X
Page 3
Use the steps below as a guide to quickly set up your camera so it will function using the factory
default settings.
STEP 1
Open camera cover. Install 4 C-cell alkaline batteries. Make sure that the polarities on the
batteries match the polarities indicated in the battery chamber. Recommended for use:
Duracell® or Energizer ® batteries.
STEP 2
Insert SD Memory Card until you hear an audible click. Camera will not operate without SD card.
Slide the Mode switch to setup. To set the time and date, press the enter button and use the
Up/Down buttons to change settings. Press Select to lock in the setting.
STEP 3
Mount camera in desired location using a mounting
strap. Switch camera to IR AIM. Aim camera using
motion detection to determine target area. Walk in
front of at the desired distance and the camera LED
will ash indicating the area which is detected.
STEP 4
Set the Delay and Resolution. Slide the Mode switch to
Auto. The camera will start count down. Close cover
and secure. The camera will operate using default
settings. You may also customize the settings if required.
Eyelet
Mounting
Strap
TIME/DATE:
AM
12:00 2011/1/01 CAMERA ID: 1
QUICK START INSTRUCTIONS
II
DEFAULT SETTINGS
III
Page 3
A-5/A-8 Digital Game Camera
Page 10
A-5/A-8 Digital Game Camera
Factory Settings
There are a number of ways for you download and view
the pictures, videos in the eld or at another location.
Removing the SD Card
To remove the SD Memory Card, open the camera cover
and push gently on the SD card and it will pop out slightly
allowing you to remove it. Load the SD card into the
player or card reader to view or move stored images to
another location.
Important
Make sure that the camera is in the OFF position before
removing SD card.
ln the Field
You can download the pictures or videos with the aid
of external devices. To download, use an external player
or card reader that is supported by 12V DC or Mini USB Jack.
At Home
Remove the entire camera and transport to another location to download images. To connect the
camera to a PC computer, turn the camera ON, press the MENU button once to change to SETUP
Mode. Connect the mini USB cord (not included) between the USB out port and the PC computer. The
computer will recognize the camera as a removable drive. The unit works with Windows XP/Vista/7
and Mac OS X. Copy the images and videos from the camera onto your PC for further editing or
printing. When the USB cable is disconnected, the camera will go back to SETUP mode.
VIEWING YOUR IMAGES
IX
See the full line of Moultrie camera accessories at www.moultriefeeders.com
Page 4
CAMERA SETUP
IV
Page 4
A-5/A-8 Digital Game Camera
Mounting with a Strap
Close cover and place camera on a tree or pole
approximately 3 ft. high. Thread the mounting strap
through the mounting strap slots on the back of the
camera and secure.
Hint: If you are mounting camera to cover a trail,
face the camera down the trail tilted at a slight
downward angle.
Face the camera North or South to avoid
over exposure from the sun.
Clear brush away from camera front to
avoid false triggers from the wind.
Page 9
A-5/A-8 Digital Game Camera
Battery Installation
Open the camera cover and install 4 C-Cell Alkaline
batteries. Make sure that the (+ and -) polarities match
the polarities indicated inside the battery chamber.
Note: Anytime you load or unload batteries,
make sure that the camera is OFF. If using
12V DC Power Panel Plug, do not remove
internal batteries.
Insert SD Card
You will need to open the front cover to insert an
SD memory card. You can insert a SD Card up to 32 GB.
Insert the SD card in the direction indicated on the card,
until you hear an audible click.
Note: Camera will not operate without an SD memory
card installed.
Power ON
Slide the Mode Switch to the Setup position.
The time will appear on the LCD Display. The camera
has powered up.
Memory & Storage
Your camera supports external SD memory cards ONLY and will accept up to a 32GB card. Using large
memory cards can slow the camera response. The camera cannot capture any photo or video without
external memory. Please insert an SD memory card to operate camera. Estimates are based on the
most common types of memory cards that can be purchased at electronic stores, office supply stores,
or online. Estimates may vary based on camera settings or environmental conditions.
Important
Always turn the unit o when inserting or removing an SD memory card to avoid damage and ensure
that the camera properly updates the memory information.
Auto Mode
SD Card Size: 2 GB 16 GB
HIGH 2560 x 1920 1500 12000
LOW 640 x 480 8000 64000
Video Mode
SD Card Size: 2 GB 16 GB
VGA 640 x 480 (based on 10 sec video) 204 1632
Actual capacity will vary based on image properties.
System Requirements
OS: Microsoft® Windows® XP with Service Pack 2 (Service Pack 3 recommended);
Windows Vista® Home Premium, Business, Ultimate, or Enterprise with Service Pack 1;
Windows 7 or Mac OS 10.1 or higher
Hard disk space: 100MB or above
CPU: Intel® Pentium® 4 or AMD Athlon® 64 processor or above
Memory: 1GB of RAM
Specications A-5 A-8
Operational Mode Game Detect/Video Game Detect/Video
Resolution 5.0 MP 8.0 MP
Still Resolutions JPEG JPEG
Low 640 x 480, High 2560 x 1920 Low 640 x 480, High 3200 x 2400
Video Resolutions AVI - 640 x 480 AVI - 640 x 480
SD Memory Card Up to 32 GB SD card (not included)
Up to 32 GB SD card (not included)
Power Supply 4 C-cell Alkaline batteries 4 C-cell Alkaline batteries
(not included) (not included)
CAMERA SPECIFICATIONS
VIII
NO
Trail
YES
Trail
Page 5
Page 8
A-5/A-8 Digital Game Camera
Page 5
A-5/A-8 Digital Game Camera
CAMERA SETUP (cont)
IV
Aiming Camera
After the camera has been mounted, open the cover
and slide the Mode Switch to IR Aim. Close cover.
Stand in front of the camera. The Status LED will
ash red when it detects movement. Use this process
to guide your camera to cover the desired target area.
MOULTRIE ACCESSORIES (Sold Separately)
V
Using a Deluxe Tree Mount
The camera can also be mounted directly to a tree using
a mounting bracket that attaches directly to a tree or
pole. Strap the tree mount to the tree and secure, then
attach the camera to the tree mount using the tree
mount socket located on the back of the camera.
Using the Moultrie Camera Power Panel
Place near the tree where the camera is mounted. Place
for best exposure to sun. To attach to a tripod secure
the power panel to the tripod angled upward for best
exposure. Plug the power panel to the Power Panel
Plug. This will extend the life of your camera in the field.
Note: Leave internal batteries in the camera during use.
The Camera Power Panel needs 4 hours of sunlight to
fully power the camera.
Using the Moultrie Battery Box
Extend the eld life of your Moultrie camera with a
long-lasting, rechargeable external power source.
Place near the tree where the camera is mounted.
Plug the Battery Box to the Power Panel Plug.
This will extend the life of your camera in the field.
Photo Mode
To operate the camera in Photo mode, slide the Resolution
button to the HI or LO position. Slide the Mode switch
to AUTO position. The LCD display will count down for
10 seconds. After the LCD goes o, the camera is ready
for capturing photos.
Video Mode
To operate the camera in Video mode, slide the Resolution
button to the VID position. Slide the Mode switch to AUTO
position. The LCD display will count down for 10 seconds.
After the LCD goes o, the camera is ready for capturing
video. (10 second video clips at 30 frames per second).
CAPTURE MODES
VII
FCC Statements
Moultrie Products, LLC
MCG-12589/ MCG-12646
Note: Changes and modifications not expressly approved by the party responsible could void the user’s authority to operate this device.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: THE MANUFAC TURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
NOTE: This device complies with the limits for a Class B digital device, pursuant to Par t 15 of the FCC Rules. These limits are designed to provide
reasonable
protection against harmful interference in a residential installation. This device generates,
uses, and can radiate radio frequency energy
and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference
will not occur in a particular installation. If this device does cause harmful interference to radio or television reception,
which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- lncrease the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Page 6
Page 6
A-5/A-8 Digital Game Camera
Page 7
A-5/A-8 Digital Game Camera
SETUP AND PROGRAMMING
VI
Navigating Dierent Settings
During the Setup mode, you can program the camera
for dierent settings. The Enter button will start the
programming process when the selection ashes. The
Up/Down buttons will move from one value to the next.
The Enter button will then lock in any selections. Then
press the Select button again to move to the next setting.
Turning Power ON/OFF
Open the camera cover. Turn the Mode switch to
the Setup position. The time will appear on the LCD display.
If you want to turn the unit o, slide the selector switch to
OFF. The LCD will show “OFF” and then power down.
Note: If there is no activity for 2 minutes the camera will shut
o automatically to save battery life.
Setting Time and Date
While the camera is in the Setup mode, the LCD display will
show the time. Press the Enter button and the selection will
ash. Use the UP/Down buttons to change the selection.
Press the Enter button to lock in the selection. Press the
Select button to move to the next selection. Repeat the
process to set the year, month and day.
Reset Picture Count/Erase Images/Format Card
After the camera’s time and date have been set,
you can reset the picture count on the camera.
Press the Select button until “Clr” shows in the
LCD display. Press Enter button and use the Up/Down
buttons to choose between Yes or No.
Press the
Enter button to conrm the selection.
“Yes” will reset le number to start from 0001
and erase all images stored on the SD card.
NOTE: This will also format your SD card
for use in your camera.
Setting Camera ID
Press the Enter button to select an identity for your
camera. Use the Up/Down buttons to choose between
nine dierent numbers (1-9) to help identify your cameras
(i.e. CAMERA 3 will be marked on the info strip given 3 was
selected). Press Enter to lock in your selection. Press the
Select button and the LCD will display the time again.
Setting Time Delay
To set the time delay, slide the Delay switch
to the desired time. There are 4 time delay
settings, 1 min, 5 mins, 10 mins and 30 mins.
Setting Image Quality or Type
Slide the Resolution switch to the desired setting.
Choose one of 3 settings:
High Photo, Low Photo or Video.
Sleep Mode
After all your settings have been made, slide the
Mode switch to Auto and close the cover.
Note: If there is no activity within 2 minutes, the camera
will enter sleep mode to conserve battery life. The camera
will then power up and become active when motion
is detected.
Loading...