Moulinex 043-1174-8 User Manual
USER GUIDE
GUIDE DE L’UTILISATEUR
EN FR
1.7L DIGITAL KETTLE
BOUILLOIRE NUMÉRIQUE DE 1,7 L
043-1174-8
If you have any questions or concerns please call our Moulinex
toll-free number at 1-888-670-6681.
Si vous avez des questions ou des préoccupations, veuillez
appeler notre numéro sans frais Moulinex au 1-888-670-6681.
www.moulinex.ca
contents
important safeguards
04
product diagram
06
operating your kettle
07
care and cleaning
12
contenu
importantes mises en garde
14
pièces et caractéristiques
16
fonctionnement de la bouilloire
17
entretien et nettoyage
22
EN
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions
should always be followed, including the following:
1. Read all instructions before using the kettle.
2. Do not touch hot surfaces- use handles or knobs.
3. Unplug from outlet when not in use and before cleaning. Allow
to cool before putting on or taking off parts, and before cleaning
the appliance.
4. Close adult supervision is necessary when this appliance is used
by or near children.
5. Do not operate any appliance with a damaged cord or plug or
after the appliance malfunctions, or has been damaged in any
manner. Return this appliance only to the nearest authorized
service center for examination, repair or adjustment.
6. To protect against electric shock, do not immerse this appliance
including power base, in water or any other liquid.
7. Do not use outdoors
8. Do not let cord hang over the edge of a table or counter, or touch
hot surfaces.
9. The use of accessory attachments not recommended by the
appliance manufacturer may result in fire, electric shock or injury
to persons.
10. Ensure that the kettle is properly located on the power base
before plugging into the wall or switching on. To disconnect, turn
all controls to “OFF” then remove plug from wall outlet .
11. Do not use appliance for other than intended use.
4
12. Do not place this appliance on or near a hot gas or electric burner
or in a heated oven.
13. Remove the kettle from power base before filling or pouring.
Do not attempt to remove the kettle from the power base until it
is switched off, manually or automatically.
14. Extreme caution must be used when handling or moving the kettle
and pouring from the kettle containing boiling water.
15. Scalding may occur if the lid is removed during the heating cycle.
16. This appliance is for Household Use Only.
EN
Toll free number for Moulinex: 1-888-670-6681
5
EN
PRODUCT DIAGRAM
A :Lid release button
B: Lid
C: Kettle body
D: Water level indicator
E: Control panel
F: Temperature control
G: Handle
H: Heat water : Boil water to the
desired temperature
I : Keep warm :Maintain pre-set
temperature after boiling
J: Extended boil : Keep boiling
time after boiled
K: Temperature
L: Selecting time and
temperature
M: Selecting time and
temperature
N: Function button
O: Power button
P: Connector
Q: Power base
R: Power cord
6
OPERATING YOUR KETTLE
Clean your kettle before first use
Wash the inside of the kettle and lid with mild detergent and water.
Rinse each piece thoroughly. Do not immerse the kettle or power base
in water or any other liquid. These items are not dishwasher safe.
Fill the electric kettle with fresh water to the “Max’ water level on the
water window. Boil the water, following the directions below for use of
your kettle.
ATTENTION If the kettle is filled beyond its maximum
capacity, boiling water can splash out.
EN
When the water and unit have cooled, discard the water. Rinse with
cold water and repeat.
Your electric kettle is now ready for use.
Functions
This kettle provides 3 functions :
HEAT WATER : Heats water to pre-set temperature from 40°C to
7
EN
100°C in steps of 5°C at a time.
KEEP WARM : Maintains pre-set temperature from 40°C to 90°C
in steps of 5°C at a time for 30 minutes after desired temperature is
reached.
EXTENDED BOIL : Continues to boil water at 100°C for 3-6 seconds after boiling temperature is reached( not available on all models )
The default settings are as follows:
Boil to 100°C / No keep warm/ 3 second extended boil. To adjust
default settings, use the function button to choose between
heat water , keep warm and extended boil.
Using Your Variable Temperature Kettle:
Fill the kettle with the desired amount of water, making sure that the
water lever is between the “min” and “max” level indicators.
Place the filled kettle on the base and plug the appliance in to a suitable power outlet.
To boil, simply press the power button . If you do not want the
default setting, select the function you would like to change by using
the function button to choose between Heat water , keep
warm extended boil . When you have chosen, the picture
will be lit and displayed on the LCD panel.
For HEAT WATER: Use the arrow button to select the desired
8
Loading...