Motorola V880 Owner's Manual

Welcome!
Welcom to the world of Motorola digital wireless communication! We are pleased that you have chosen the Motorola V880 wireless phone.
Personal Communications Sector
600 North U.S Highway 45 Libertyville, Illinois 60048
1-800-331-6456(United States) 1-888-390-6456(TTY/TDD United States) 10800-461-4575(Canada)
MOTOROLA, the Stylized M Logo and all other trademarks indicated as such herein are trademarks of Motorola, INC. Reg. U.S Pat. & Tm. Off. TrueSync, Sidekick, Starfish and the Stylized Starfish Logo are registered tradmarks of Starfish Software, Inc., a wholly owned independent subsidiary of Motorola, Inc. All other product or service names are the property of their respective owners.
2003 Motorola, Inc.All rights reserved. Printed in the U.S.A
Software Copyright Notice
The Motorola prouducts described in this manual may include copyrighted Motorola and third party software stored in semiconductor memories or other media. Laws inthe United States and other countries preserve for Motorola and third party software, such as the exclusive rights to distribute or reproduce the copyrighted software. Accordingly, any copyrighted software contained in the Motorola products may not be modified, reverse-engineered, distributed, or reproduced i any manner to the extent allowed by law. Furthemore, the purchase of the Motorola products shall not be deemed to Motorola or any third party software provider, except for the normal, non-exclusive, royalty-free license to use that arises by operation of law in the sale of a product.
Manual number : Cover number :
Safety and General Information
IMPORTANT INFORMATION ON SAFE AND EFFICIENT OPERATION.READ THIS INFORMATION BEFORE USING YOUR PHONE.
The information provided in this document supersedes the general safety information in user guides published prior to December 1, 2002.
Exposure To Radio Frequency(RF) Energy
Your phone contains a transmitter and a receiver. When it is ON, it receives and transmits RF energy. When you communicate with your phone, the system handling your call controls the power level at which your phone transmits.
Your Motorola phone is designed to comply with local regulatory requirements in your country concerning exposure of human beings to RF energy.
Federal Communications Commission laws : the 2nd parts of J paragraph at 47 CFR
ANSI / IEEE C 95.1-1992
IEEE C 95.1-1999
NCRP Report 86, 1986
ICNIRP 1998
Canada, Department of Health & Human Services, safety regulation, 6th articcles-
Frequency 3KHz ~ 300GHz, Electromagnetic power radiation emission regulation 1999
Australia communication Associates, “Wireless communication(Electromagnatic radiation emission)
Standards 1999
4
Operational Precautions
To assure optimal phone performance and make sure human exposure to RF energy is within the guidelines set forth in the relecant standards, always adhere to the following procedures.
External Antenna Care
Use only the supplied or Motorola-approved replacement antenna. Unauthorized antennas, modifications, or attachments could damage the phone. Do NOT hold the external antenna when the phone is IN USE. Holding the external antenna affects call quality and may cause the phone to operate at a higher power level than needed. In addition, use of unauthorized antennas may result in non-compliance with the local regulatory requirements in your country.
Phone Operation
When placing or receiving a phone call, hold your phone as you would a wireline telephone.
Body-Worn Operation
To maintain compliance with RF energy exposure guidelines, if you wear a phone on your body when transmitting, always place the phone in a Motorola-supplied or approved clip, holder, holster, case, or body harness for this phone, where available. Use of accessories not approved by Motorola may exceed RF energy exposure guidelines. If you do not use one of the body-worm accessories approved or supplied by Motorola, and are not using the phone held in the normal use position, ensure the phone and its antenna are at least 1inch(2.5centimeters) from your body when transmitting.
5
Responsible driving best practices may be found in the "Wireless Phone Safety Tips" at the end of this manual and at the Motorola website : www.Motorola.com/callsmart.
Operational Warnings
For Vehicles With an Air Bag
Do not place a phone in the area over an air bag or in the air bag deployment area. Air bags inflate with great force. If a phone is placed in the air bag deployment area and the air bag inflates, the phone may be propelled with great force and cause serious injury to occupants of the vehicle.
Potentially Explosive Atmospheres
Turn off your phone prior to entering any area with a potentially explosive atmosphere, unless it is a phone type especially qualified for use in such areas and certified as "Intrinsically Safe." Do not remove, install, or charge batteries in such areas. Sparks in a potentially explosive atmosphere can cause an sxplosion or fire resulting in bodily injury or even death.
Note : The areas with potentially explosive atmospheres referred to above include fueling areas such as below decks on boats, fuel or chemical transfer or storage facilities, areas where the air contains chemicals or particles, such as grain, dust, or metal powders. Areas with potentially explosive atmospheres are often but not always posted.
Blasting Caps and Areas
To avoid possible interference with blasting operations, turn OFF your phone when your are near electrical blasting caps, in a blasting area, or in areas posted "Turn off electronic devices." Obey all signs and instructions.
6
Medical Devices Pacemakers
Pacemaker manufacturers recommend that a minimun separation of 6 inches(15centimeters) be maintained between a handheld wireless phone and pacemaker.
Persons with pacemakers should :
ALWAYS keep the phone more than 6inches(15centimeters) from your pacemaker when the
phone is turned ON.
NOT carry the phone in the breast pocket.
Use the ear opposite the pacemaker to minimize the potential for interference.
Turn OFF the phone immediately if you have any reason to suspect that interference is taking place.
Hearing Aids
Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may want to consult your hearing aid manufacturer to discuss alternatives.
Other Medical Devices
If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from RF energy. Your physician may be able to assist you in obtaining this information.
Use While Driving
Check the laws and regulations on the use of phones in the area where you drive. Always obey them. When using your phone while driving, please :
7
Give full attention to driving and to the road.
Use hands-free operation, if available.
Pull off the road and park before making or answering a call if driving conditions so require.
Operational Warnings
For Vehicles With an Air Bag
Do not place a portable phone in the area over an air bag or in the air bag deployment area. Air bags inflate with great force. If a portable phone is placed in the air bag deployment area and the air bag inflates, the phone may be propelled with great force and cause serious injury to occupants of the vehicle.
Potentially Explosive Atmospheres
Turn off your phone prior to entering any area with a potentially explosive atmosphere, unless the phone is a model specifically identified as being “Intrinsically Safe.” Do not remove, install, or charge batteries in such areas. Sparks in a potentially explosive atmosphere can cause an explosion or fire resulting in bodily injury or even death.
Note : The areas with potentially explosive atmospheres referred to above include fueling areas such as below decks on boats, fuel or chemical transfer or storage facilities, areas where the air contains chemicals or particles, such as grain, dust, or metal powders, and any other area where you would normally be advised to turn off your vehicle engine. Areas with potentially explosive atmospheres are aften but not always posted.
8
Batteries
Batteries can cause property damage and/or bodily injury such as burns if a conductive material such as jewelry, keys, or beaded chains touch exposed terminals. The conductive material may complete an electrical circuit(short circuit) and become quite hot. Exercise care in handling any charged battery, particularly when placing it inside a pocket, purse, or other container with metal objects. Use only Motorola original batteries and chargers.
Your battery or phone may contain symbols, defined as follows :
Symbol Definition
Important safety information will follow.
Your battery or phone should not be disposed of in a fire Your battery or phone may require recycling in accordance
with local laws. Contact your local regulatory authorities for more information.
Your battery or phone should not be thrown in the trash.
Your phone contains an internal lithium ion battery.
9
Contents
contents
I. Before Using
Confirming Components 1 5 Name and Function of Each Part 1 5 Basic Keypad Operation 1 6 Menu Map 1 7 Display Icon Internal display screen 2 1
Sub-LCD menu 2 3 How to Use Battery Cell Phone and Battery Pack 2 4
Precautions When Using 2 8
External display screen 2 2
The Battery and UIM Card 2 4 Charging Battery Pack 2 5 Battery Pack Charging Progress State 2 5 Battery Pack Charging Time 2 6 Battery Pack Operating Time 2 6 Low Voltage Alert 2 7 Battery Pack Care Information 2 7
II. Basic Operation
Power ON and OFF Power ON 3 0 Placing a Call 3 0
10
Power OFF 3 0 Placing a call from Phone Book 3 1
Turbo Dialing 3 1
II. Basic Operation
II. 기본기능사용하기
Placing a Call Electronic Dialing 3 1
Receiveing a call Receiveing a call Using
Unanswered Call 3 9
Emergency Dialing 3 2 Voice Dialing 3 3
E a r m i c r o p h o n e 3 5 Setting Call Receive Mode 3 5 Using Auto Answering 3 6
III. Using Bell Control
Changing Ring type Saving Recorded Sound 4 1 Changing Receive Mode 4 2
Changing Ring Volume 4 3 Selecting Ringer Option 4 4 Setting Alert Tone 4 4
Setting Sound Effect Power Sound 4 5
Setting Etiquette Mode 4 2
Connect Tone 4 5 1 Min Timer 4 5 Svc. Area Alert 4 5
Key Sound 4 6 Folder Sound 4 6 Sel. Alert Tone 4 6
IV. Using Display
Graphic Mode Internal screen 4 8
Back Light Time Main LCD Time 5 0 Change Banner 5 1
Setting Svc. Lamp 5 1 Setting Light Color 5 2
External screen 4 8 Deleting graphic 4 9
Keypad Time 5 0
Keypad Color 5 3 SVC. Lamp Color 5 3
V. Using PIM
S c h e d u l e Entering Schedule 5 5
Using To Do List Entering To do 5 7
Using Biz. Card 5 8 Using D-day Entering D-day 6 0 Using Bio Rhythm 6 1
Checking Schedule 5 6 Clearing Schedule 5 6
Checking To do 5 7 Clearing To do 5 8
Sending Biz. Card 5 9 Checking D-day 6 1
VI. Using Tool Box
Time Set Setting Timer 6 3 Alram Set Setting Alram 6 4
C a l e n d a r 6 7
Timer Off 6 3 Alram off 6 6
Setting Alarm Sound 6 6
VI. Using Tool Box
World Time 6 7 C a l c u l a t o r 6 8 R e c o r d i n g R e c o r d i n g 6 9
Using Preview Taking a Picture 7 2
Managing a Picture Viewing picture 7 9 Sending Photos by e-mail 8 1
Photowallpaper Setting 8 1 Video Capture Taking a video 8 2
Video Play Using Options 8 8 Camera Setup 8 9
Call Waiting 9 1 Call Forward 9 1
Setting Auto Area Code 9 4
Ending Recording 6 9 Playback of Recording 7 0 Deleting Recorded Dontent 7 0
VI. 타이머기능사용하기
VII. Using Camera
Taking self-photo 7 3 Using Options 1 7 4 Using Options 2 7 7
Using Option 8 0
Using Option 8 2 Taking self-video 8 3
Using Options 1 8 4 Using Options 2 8 5
VI. 타이머기능사용하기
VIII. Using Setting
Fwd All Calls 9 2 Fwd Default 9 2 Fwd if busy 9 3 Fwd if no ans 9 3
11
VI. 타이머기능사용하기
VI. Using Setting
Set Int’l Code 9 5 Change Language 9 5 Data Mode Data Rate 9 6
U-Mail Config 9 7 Browser Setup 9 8 My Menu 9 9
Data Profile 9 6 Use 1X Data 9 6 Common Port 9 7
IX. Using Security
Using Auto Lock One-Touch Lock Feature 1 0 1 Change Code 1 0 2 Call Restrict 1 0 2 PIN Set 1 0 3 Master Reset 1 0 3 S/W Version 1 0 4
X. Using Radio Comm.
Using Bluetooth H e a d s e t 1 0 6
Using IrDA Dial-up Network 1 1 4
12
N e t w o r k 1 0 9 OBEX Push 1 1 1 F T P 1 1 2 PC Sync 1 1 3 My Info 1 1 4
Phone Book data and file transport 1 1 6
XI. Using Phone Book
Storing a Number Storing a Number from a Menu 1 1 9 Correcting Phone BookCorrecting Phone Book 1 2 3
Deleting Phone Book Deleting the whole Phone Book 1 2 5
Searching Phone Book 1 2 7
Storing a Number on idle Mode 1 2 0
Correcting Name and E-mail Adds 1 2 4
Correcting Group 1 2 4
Deleting Stored List 1 2 6 Deleting Individual Items 1 2 6
Deleting Group 1 2 7
View All 1 2 8 Recall By Loc 1 2 8 Recall By Group 1 2 9
Recall By Name 1 2 9 Using [OPTION] 1 3 0 Memory Status 1 3 1
View my Num 1 3 1 Copy Entries 1 3 2
XlI.Using Functions During a Call
Adjusting Tone Volume During a Call 1 3 4
Taking Note During a Call 1 3 4
Searching Menu During a Call 1 3 4
Sending My Number 1 3 5
M u t i n g 1 3 5 Using Speaker Phone 1 3 6 Viewing Call History Information 1 3 6
Using [PBOOK] 1 3 4
Using [MSG] 1 3 5
XlII. Using SMS Features
Checking Message Text Message 1 3 8 Sending Message 1 4 0
Setting Message Receive Function 1 4 3
Memory Status 1 4 4 Deleting Message Delete received message 1 4 5
Voice Message 1 4 0 Sending a New Message 1 4 1
Sending a Stored Message 1 4 1 Move to Message 1 4 2
Alert Freqency 1 4 3 View Msg 1 4 3 Msg Sound 1 4 4 Save To 1 4 4
Deleting saved message 1 4 5
XIV. Using E-mail
Sending E-mail New e-mail 1 4 7 Checking New E-mail Using the folder menu 1 5 2
Managing Data Folder 1 5 5 E-mail Setting Receiving & View Setting 1 5 7
Sending stored e-mail 1 5 0 Using the e-mail menu 1 5 3
Replaying/Forwarding e-mail 1 5 5 Data Folder 1 5 6 Send & New Mail Setting 1 5 8
Register Account Setting 1 5 8 O t h e r s 1 5 9 View Mail Setting 1 2 9
XV. Using Data Folder
Using Data Folder Display All 1 6 1
User Folder 1 6 4 My Data 1 6 6 P i c t u r e 1 6 8 R i n g 1 6 9 v C a r d 1 6 9 O t h e r s 1 7 0
XVI. Using U-Max
Accessing U-Info Accessing U-Info 1 7 2 Accessing U-Magic Accessing U-Magic 1 7 3
Accessing U-Map Accessing U-Map 1 7 6
U-Info MENU 1 7 2 U-Magic MENU 1 7 3
Key usage in U-Magic 1 7 4 Download U-Magic applications 1 7 4 Execute U-Magic applications 1 7 5
U-Map Menu 1 7 6
XVIl. Appendix
T r o u b l e s h o o t i n g 1 7 8 Specific Absorption Rate data 1 7 9 Specification and Characteristics 1 8 1
13
Before Using
1. Confirming Components 1 5
2. Name and Function of Each Part1 5
3. Basic Keypad Operation 1 6
4. Menu Map 1 7
5. Display Icon 2 1
6. How to Use Battery 2 4
7. Precautions When Using 2 8
1. Confirming Components
P h o n e
B a t t e r y ( 5 5 0 m A h / 8 7 0 m A h )
U s e r’s Manual
Before Using
2. Name and Function of Each Part
A n t e n n a
I r D A
Camera lens
Camera Flash
and Light
External LCD
Service Lamp
S p e a k e r
Volume Button
Camera Key
R e c e i v e r
LCD Screen
Earpiece Terminal Navigation Key
T r a n s m i t t e r
Wireless Data Communication Cable Connection Port
15
Before Using
3. Basic Keypad Operation
16
To Place or receive a call.
Short press : To dispaly a calling number list
To turn the power ON/OFF and end a call
To end a selected feature to return to the idle screen
To use Idle screen feature
Left : One-touch for ‘Phone Book’ Right : One-touch for ‘M e s s a g e ’ Up : One-touch for ‘U - M a i l ’M e n u Down : Short press : ‘Data Folder’
Long press : ‘Call History’
To use menu feature - Menu search feature
Dial buttons - To enter numbers and characters
Quick dialing for an international call
To set/reset Etiquette feature
To set/reset One-touch lock feature
One-touch for Camera menu
Camera Preview Preparng
To delete characters or number while entering them
Short press : To delete characters one by one Long press : To delete the whole characters
To move to the upper menu or previous display screen
One-touch for ‘U - M a p ’
To search lists and control volume during a call
If you press and hold the volume button as the folder
is shut, the sub LCD light becomes on.
U-Info, U-Mail, U-Magic, U-Map, UNI-Info(U-Max)
To use menu and message features - [OK] feature
To move to the top menu in Idle screen
To use menu and message features - [OPTION] features
To move to the top ‘MY MENU’in Idle screen
To use menu and message features - [BACK] or
[CANCEL] features
MENU
4. Menu Map
1. Bell Control
2. Display
Before Using
3. PIM
1. Ringer Style
1. Melody (1~18)
2. Natural Sound (1~4)
3. Ringer (1~9)
2. Ring/Vib Bell Only
Vib. Only
Vib. Then Bell L a m p
3. Ring Volume (1~5
s t e p s
)
4. Ringer Option
To Set Volume,
Low to High
5. Alert Tone
1. Connect Tone
2. 1 Min Timer
3. Svc. Area Alert
6. Sound Effect
1. Power Sound
2. Key Sound
3. Folder Sound
4. Sel. Alert Tone
1. Graphic Mode
1. Idle Mode
2. Power On
3. Power Off
4. In Calling
5. Sub LCD
6. Menu BG
2. Back Light Time
1. Main LCD Time
2. Keypad Time
3. Change Banner
4. Svc. Lamp
5. Light Color
1. Keypad Color Blue, Amber
5. Light Color
2. Svc. Lamp Color Green, Amber
3. PIM
1. Schedule
2. To do list (1~20)
3. Biz. Card
4. D-day
5. Bio Rhythm
17
Before Using
MENU
1. Timer Set
2. Alarm Set
3. Calendar
4. World Time
5. Calculator
6. Recording
1. Recording Note
2. Recored Sound
3. Voice Dialing
18
4. Tool Box
5. Camera
1. Preview
2. Photo Manager
3. Photo Mail
4. PhotoWallpaper
5. Video Capture
6. Video Play
7. Camera Setup
1. Shutter Sound
2. Light Setup
1. Answer Option
1. Answer Machine Auto Answering Answer Ment Sel Answering Rec. Answering Play
2. Call Answer Flip Answer Auto Answer
2. Calling Option
1. Call Waiting
2. Call Forward
3. Auto Area Code
4. Set Int’l Code
6. Setting
5. Change Language Chinese, English
6. Data Mode
1. Data Rate
2. Data Profile
3. Use 1X Data
4. Common Port
7. U-Mail Config
1. U-Mail Sound
2. Setup
3. Data Reset
8. Browser Setup
1. Linger Time
MENU
Before Using
7. Security(Enter Code)
1. Auto Lock
2. Emergency Calls (1~4)
3. Change Code
4. Call Restrict
1. Int’l Call
2. Outgoing Call
5. PIN Set
1. Require PIN
2. PIN Change
6. Clear List
1. Phone Book
2. Call to List
3. CLI List
4. Unans List
6. Clear List
5. Schedule
6. To do list
7. Master Reset
8. S/W Version
8. Radio Comm.
1. Bluetooth
1. Headset
2. Network
3. OBEX Push
4. FTP
5. PC Sync
6. My Info
2. IrDA
9. Phone Book
1. View All
2. Recall By Loc
3. Recall By Group
9. Phone Book
4. Recall By Name
5. Add Entry
6. Memory Status
7. View My Num
8. Copy Entries
1. UIM To Phone Select Copy Singer Copy
2. Phone To UIM Select Copy Singer Copy
19
Before Using
Message
1. Read Msgs
1. SMS Inbox
2. UIM
3. Web Alert
2. Send a Msg
1. New Msg
2. SMS Outbox
3. UIM
3. Voice Msgs
4. Message Setup
1. Alert Frequency
2. View Msg
3. Msg Sound
4. Save To
5. Memory Status UIM, Phone
20
U-Max
1. U-Info
2. U-Mail
1. New Mail
2. Inbox
3. Send Box
4. Check New Mail
5. Data Folder
6. Mail Settings
3. U-Magic
1. Applet Info
2. Execute Applet
3. Delete Applet
4. Move Applet
5. Download
6. Wireless Setup
7. New Folder
3. U-Magic
8. Edit Folder
9. Delete Folder
0. Memory Usage
4. U-Map
1. Access
2. Setting GPS On Position Ack Default URL MPC Addr Data Profile
5. UNI-Info
Data Folder
1. Display All
2. User folder
3. My Data
1. My Photo
2. My Video
3. My Record
4. Picture
5. Ring
6. vCard
7. Others
5. Dispaly Icon
󱀣 Internal display screen
Before Using
Current signal strength this indicated by the number of lines shown. Indicates current calling status. This icon appears when a call is in process. WAP connecting mode. Phone Lock setting activated. Disappearing when it is inactivated. Text or voice message received. It disappears when you retrieve new message. Alarm setting activated. Disappearing when you discharge Alarm setting. Indicates Ringer type is Vib Only. Indicates Ringer type is Vib Then Bell. Indicates Ringer type is Lamp. Etiquette mode status. Disappearing when it is inactivated. Indicates battery charge level
Fully charged status shown Low battery Low battery warnning If you connect the data communication cable, it is displayed on the screen. The display caries depending on the Rx mode you have selected at Data setup
Data Received Displayed on screen when you use the earmicrophone. Displayed on screen when Answer Machine is in activation. E-mail received. It disappears when you retrieve new e-mail. Bluetooth function is activated.
Web Alert message received. It disappears when you retrieve new message.
21
Before Using
󱀤
External display screen
Current signal strength this indicated by the number of lines shown. Text or voice message received. It disappears when you retrieve new message. Alarm setting activated. Disappearing when you discharge Alarm setting. Indicates Ringer type is Vib Only. Indicates Ringer type is Vib Then Bell. Indicates Ringer type is Lamp. Etiquette mode status. Disappearing when it is inactivated. Indicates battery charge level
Fully charged status shown Low battery Low battery warnning
■ You can change graphic display of sub LCD after selecting ‘D i s p l a y ’-> ‘Graphic Mode’-> ‘Sub LCD’.
■ The lock function sign is not displayed on the sub LCD.
■ In order to economize the battery, the LCD light becomes off automatically if no key entry is made for the designated time period.
6. Sub-LCD menu
Hold down the press while the folder is closed ▶ Select Photo and
22
󱀣 Select Photo
You can take the picture using sub-lcd display while the folder is shut. (Refer to P.73)
󱀤 Select Video
You can take the video using sub-lcd display while the folder is shut. (Refer to P.83)
󱀥 Select Light
The lamp under the camera is lighted.
● The lamp is on for 1 minute in default. The lamp blinks after 55 seconds.
● P r e s s again to turn off the lamp. Press or to reset the time.
󱀦 Select Cancel
Move sub-lcd idle mode.
Before Using
Select Photo and
Select Video and
Select Light and
Select Cancel and
23
Before Using
7. How to Use Battery
󱀣 Cell Phone and Battery Pack
󱀤 The Battery and UIM Card
I . Installing UIM Card on the Phone
Disconnect the battery pack from the phone and side UIM Card into the rail on the back of the phone.
UIM Card ?
NOTE!!
UIM Card contains your Phone Number, service details, and phonebook/message memory, Caution : Do not bend or scratch your UIM Card. Avoid exposing your UIM Card to static electricity, water, or dirt
24
I . A s s e m b l y
①Fit the battery pack correctly into the groove provided on the lower side of the handset. ②Side it all the way in the arrow direction until a ‘c l i c k ’is heard.
I I .R e m o v a l
①Press the removal button upward. ②Remove the battery pack in the arrow direction from the handset.
Before Using
󱀥 Charging Battery Pack
I. Charging battery on the table dock
The battery is not fully charged when it is supplied. Be sure to charge the battery fully before you use the phone.
■ Connect the DC power cable to the wall outlet.
■ Check if the triangular lamp on the AC cable jack turns on in orange.
■ Connect the AC power cable to the port on the rear of the table dock.
■ Place the handset on the table dock. (There is only on hole on the dock, you cannot recharge two batteries together.)
■ You can recharge the battery without the handset if you mount the batter on the battery case.
■ Battery recharge status is on the triangular lamp on the AC power cable jack.
II. Recharging battery with the AC power cable
■ Connect the DC power cable to the wall outlet.
■ Be sure that the triangular lamp on the DC power cable jack turns on and flickers.
■ Connect the DC power cable jack to the port on the bottom of the handset.
■ Battery recharge status is on the triangular lamp on the AC power cable jack.
󱀦 Battery Pack Charging Progress State
D e s c r i p t i o n
Cable jeck
<In the indicator lamp flickers in red>
■ The charging terminals are not contacted properly. Check to see if the battery pack is clean, and then mack another attempt.
■ The battery pack or any other component is defective. Contact the service center.
Being charged At completion of charging
R e d G r e e n
25
Before Using
<If the indicator lamp lights up in orange>
■ The battery pack is on standby for charging or is being charged in a too hot of cold place.
■ If you place it in room temperature, the indicator lamp will charge into red and charging operation will be resumed.
󱀧 Battery Pack Charging Time
D e s c r i p t i o n 550mAh (V880) 870mAh (V880)
Required Time
■ Recharging time varies by the battery pack and charger status.
■ If AC power voltage applied to the power supply adapter is low, the charging time may become longer.
■ If ambient temperature is too high or low, charging may not be done sufficiently. Always charge the battery in room temperature.
󱀨 Battery Pack Operating Time
T i m e Slot Mode 2
Standard Talk time
■ The slot mode varies according to service areas.
■ Electric currents are consumed more during a call or when using WAP or Game than in standby state, so the the longer call time is, the shorter the standby time becomes.
■ Receiving a call requires the same amount of electric currents as when placing a call.
■ Standby time in ‘NO SERVICE’area becomes shorter.
■ The operating time varies accrding to charging state, temperature(low/high),radio wave condition in the area of use, backlight status.
26
About 110 Min About 120 Min
550mAh (V880) 870mAh (V880)
Slot Mode 1
About 30~50 hours
About 60~80 hours
About 90~120 hoursStandard Standby Time
About 100 Min
Slot Mode 0 Slot Mode 1 Slot Mode 2Slot Mode 0
About 50~80 hours About 100~130 hoursAbout 150~180 hours
About 150 Min
Before Using
󱀩 Low Voltage Alert
■ When the battery pack is almost used up, the phone sounds a ‘warning sound’and ‘ f l a s h e s .
■ If you continue to use your phone in this state, the power of the phone is turned off. lmmediately charge your phone.
■ If ‘ ‘flashes, although you press the button, backlight for display screen and buttons may not be On and the cell phone features are not supported properly. Immediately charge your phone before using again.
󱀪 Battery Pack Care Information
■ Always use the authorized, dedicated charger and battery pack. If an unauthorized battery pack is installed, a
‘Warning! Unauthorized Battery’message is displayed on the Idle display screen.
■ Using and unauthorized charger could cause damage to the battery pack or explosion may result. Never use such a product.
■ Never short-circuit the contact terminals of the battery pack. Explosion may result. Always store the battery pack
in the battery case.
■ Always charge or store the battery pack in room temperature. Charging would not be done sufficiently and the indicator lamp changes into orange if you change the battery pack in a too hot place(in a car in summer or near open flames)or a too cold
place. If it is stored over an extended period of time, its capacity level becomes lower, shortening its operating time.
■ Never disassemble the battery pack or place it near open flames.
■ Store the charger and battery pack in the area out of children’s reach.
■ Never give a strong impact to your phone or let it drop. Malfunctions or short life may result.
■ Any foreign matters in contact with the metallic part of contact terminals on the charger and battery pack may interfere with charging process. Always keep them clean.
■ The chargeable battery pack is a consumable item. Repeated switching between charging and discharging reducess its service life slowly. If the battery operating time is reduced to a half level compared to that when purchased, replace it with a new one.
27
Before Using
8. Precautions When Using
■ If the lamp flickers while you are charging your phone and battery, charging operation fails. If you leave it in such a state, the charger may malfunction.
■ Always use authorized, dedicated battery pack and charger. Using an unauthorized battery pack or charger rejects the services offered by Motorola.
■ Do not use the charger to charge phones and batteries of different models. Problems may result.
■ Never use them in a humid, hot atmosphere. If your phone becomes damp, malfunction may result. If submerged, it may be beyond repair. Never turn the power ON with your phone wet. Instead, remove the battery pack and contact the nearest service center for repair.
■ Never disassemble or alter your phone. Unauthorzed disassembly may reject free service offered by Motorola.
■ If you sit down with your phone stored in a hip pocket, use care not to give a strong impact to it. It may be broken.
■ Avoid cleaning your phone with chemical solutions such as solvent or thinner.
■ Use care not to give an impact or vibration to your phone. When not in use, it should be stored in a safe place.
■ Use the authorized handsfree kit. Otherwise, malfunction may result. Especially, products having strong magnetism may be a direct cause for malfunction of cell phone, which will reject the free service offered by Motorola.
■ In order to prevent any harm to human body, do not hold the battery in the mouth and do not use the damaged battery.
■ Keep the handset away from any magetic product such as credit card, phone card that may be damaged by the electro magnetic field of the handset.
■ Keep the handset away from any heating facility such as stove, microwave or oven.
■ Do not apply excessive force to the handset to protect appearance and internal parts of the handset.
■ Do not hold the strap and turn the handset round not to hurt anyone.
■ Be sure that the handset is not held between the automatic doors of a bus or subway train.
28
Basic Operation
1. Power ON and OFF 3 0
2. Placing a Call 3 0
3. Receiving a Call 3 5
4. Unanswered Call 3 9
Basic Operation
1. Power ON and OFF
󱀣 Power ON
Press
■ The service lamp is on, displaying China Unicom and user-set graphic. And then, the initial screen is displayed.
󱀤 Power OFF
Press and hold
■ The graphic disappears and the power is turned off.
■ A graphic can be downloaded from WAP and changed in ‘Graphic Mode’under ’D i s p l a y ’.
Graphic may be displayed late depending upon the capacity of the downloaded graphic.
2. Placing a Call
Enter a desired area code and phone number ▶
■ The phone automatically redials if the call is not connected.
30
Basic Operation
󱀣 Placing a call from Phone Book
Use search to select a desired person to call. (see P.88~90 Searching Phone Number)
■ P r e s s i n g with a person to call selected connects the call to the number set to ‘Representative Number’
among the items with phone numbers stored.
■ P r e s s from Standby display to select ‘View All’,
‘Recall By Loc’, ‘Recall By Group’, ‘Recall By Name’i n
Select a person to call ▶Select an item to call ▶
󱀤
Turbo Dial
Press and hold a location to call on Idle Mode connects a call to the representative number of the appropriate location number is 17, Press the dial button and press and hold . (see P.121)
i n g
󱀥 Electronic Dialing
You can use this function conveniently by entering a few numbers in advance according to the audio announcement when using ARS(for telebanking service or voice message confirmation). To cancel electronic dial, press [ C A N C E L ] .
Input key
P
The numbers after‘P’can be sent only if the
‘Phone Book’.
Operating Method
[NEXT]
is pressed.
Enter Phone Number
T
The numbers after‘T’are sent shortly after.
▶ E n t e r‘P’or ‘T’and then a number to be dialed electronically ▶
31
Loading...
+ 150 hidden pages