The Motorola products described in this manual may include
copyrighted Motorola and third-party software stored in
semiconductor memories or other media. Laws in the United
States and other countries preserve for Motorola and
third-party software providers certain exclusive rights for
copyrighted software, such as the exclusive rights to
distribute or reproduce the copyrighted software.
Accordingly, any copyrighted software contained in the
Motorola products may not be modified, reverse-engineered,
distributed, or reproduced in any manner to the extent
allowed by law. Furthermore, the purchase of the Motorola
products shall not be deemed to grant either directly or by
2 Introduction
implication, estoppel, or otherwise, any licence under the
copyrights, patents, or patent applications of Motorola or any
third-party software provider, except for the normal, nonexclusive, royalty-free licence to use that arises by operation
of law in the sale of a product.
While Products specifications and features may be subject to
change without notice, we are making every possible effort
to ensure that user manuals are updated on a regular basis to
reflect product functionality revisions. However, in the
unlikely event that your manual version does not fully reflect
the core functionality of your product, please let us know.
You may also be able to access up-to-date versions of our
manuals in the consumer section of our Motorola web site,
at http://www.motorola.com.
V1050.3G.UG.book Page 3 Tuesday, March 29, 2005 10:39 AM
V1050.3G.UG.book Page 5 Tuesday, March 29, 2005 10:39 AM
Safety and General Information3
3Safety and General Information
IMPORTANT INFORMATION ON SAFE AND EFFICIENT
OPERATION. READ THIS INFORMATION BEFORE USING
YOUR PHONE.
The information provided in this document supersedes the
general safety information in user guides published prior to
December 1, 2002.
3.1 Exposure To Radio Frequency (RF)
Energy
Your phone contains a transmitter and a receiver. When it is
ON, it receives and transmits RF energy. When you
communicate with your phone, the system handling your call
controls the power level at which your phone transmits.
Your Motorola phone is designed to comply with local
regulatory requirements in your country concerning
exposure of human beings to RF energy.
3.2 Operational Precautions
To assure optimal phone performance and make sure human
exposure to RF energy is within the guidelines set forth in the
relevant standards, always adhere to the following
procedures.
3.2.1 External Antenna Care
Use only the supplied or Motorola-approved replacement
antenna. Unauthorised antennas, modifications, or
attachments could damage the phone.
Do NOT hold the external antenna when the phone is IN USE.
Holding the external antenna affects call quality and may
cause the phone to operate at a higher power level than
needed. In addition, use of unauthorised antennas may result
in non-compliance with the local regulatory requirements in
your country.
3.2.2 Phone Operation
When placing or receiving a phone call, hold your phone as
you would a wireline telephone.
Safety and General Information 5
V1050.3G.UG.book Page 6 Tuesday, March 29, 2005 10:39 AM
3.2.3Body-Worn Operation
3.2.3 Body-Worn Operation
To maintain compliance with RF energy exposure guidelines,
if you wear a phone on your body when transmitting, always
place the phone in a Motorola-supplied or approved clip,
holder, holster, case, or body harness for this phone, if
available. Use of accessories not approved by Motorola may
exceed RF energy exposure guidelines. If you do not use one
of the body-worn accessories approved or supplied by
Motorola, and are not using the phone held in the normal use
position, ensure the phone and its antenna are at least 1 inch
(2.5 centimetres) from your body when transmitting.
3.2.4 Data Operation
When using any data feature of the phone, with or without an
accessory cable, position the phone and its antenna at least 1
inch (2.5 centimetres) from your body.
3.2.5 Approved Accessories
Use of accessories not approved by Motorola, including but
not limited to batteries and antenna, may cause your phone
to exceed RF energy exposure guidelines. For a list of
approved Motorola accessories, visit our website at
www.Motorola.com
6 Safety and General Information
.
3.3 RF Energy Interference/Compatibility
Note: Nearly every electronic device is susceptible to RF
energy interference from external sources if inadequately
shielded, designed, or otherwise configured for RF energy
compatibility. In some circumstances your phone may cause
interference.
3.3.1 Facilities
Turn off your phone in any facility where posted notices
instruct you to do so. These facilities may include hospitals
or health care facilities that may be using equipment that is
sensitive to external RF energy.
3.3.2 Aircraft
When instructed to do so, turn off your phone when on
board an aircraft. Any use of a phone must be in accordance
with applicable regulations per airline crew instructions.
V1050.3G.UG.book Page 7 Tuesday, March 29, 2005 10:39 AM
Medical Devices3.3.3
3.3.3 Medical Devices
Pacemakers
Pacemaker manufacturers recommend that a minimum
separation of 6 inches (15 centimetres) be maintained
between a mobile phone and a pacemaker.
Persons with pacemakers should:
• ALWAYS keep the phone more than 6 inches (15
centimetres) from your pacemaker when the phone is
turned ON.
• NOT carry the phone in the breast pocket.
• Use the ear opposite the pacemaker to minimise the
potential for interference.
• Turn OFF the phone immediately if you have any reason
to suspect that interference is taking place.
Hearing Aids
Some digital mobile phones may interfere with some hearing
aids. In the event of such interference, you may want to
consult your hearing aid manufacturer to discuss
alternatives.
Other Medical Devices
If you use any other personal medical device, consult the
manufacturer of your device to determine if it is adequately
shielded from RF energy. Your GP may be able to assist you
in obtaining this information.
3.4 Use While Driving
Check the laws and regulations on the use of phones in the
area where you drive. Always obey them.
When using your phone while driving, please:
• Give full attention to driving and to the road.
• Use hands-free operation, if available.
• Pull off the road and park before making or answering
a call if driving conditions so require.
3.5 Operational Warnings
3.5.1 For Vehicles With an Air Bag
Do not place a phone in the area over an air bag or in the air
bag deployment area. Air bags inflate with great force. If a
Safety and General Information 7
V1050.3G.UG.book Page 8 Tuesday, March 29, 2005 10:39 AM
3.5.2Potentially Explosive Atmospheres
phone is placed in the air bag deployment area and the air
bag inflates, the phone may be propelled with great force and
cause serious injury to occupants of the vehicle.
3.5.2 Potentially Explosive Atmospheres
Turn off your phone prior to entering any area with a
potentially explosive atmosphere, unless it is a phone type
especially qualified for use in such areas and certified as
“Intrinsically Safe.” Do not remove, install, or charge
batteries in such areas. Sparks in a potentially explosive
atmosphere can cause an explosion or fire resulting in bodily
injury or even death.
Note: The areas with potentially explosive atmospheres
referred to above include fuelling areas such as below decks
on boats, fuel or chemical transfer or storage facilities, areas
where the air contains chemicals or particles, such as grain,
dust, or metal powders. Areas with potentially explosive
atmospheres are often but not always posted.
3.5.3 Blasting Caps and Areas
To avoid possible interference with blasting operations, turn
OFF your phone when you are near electrical blasting caps, in
8 Safety and General Information
a blasting area, or in areas posted “Turn off electronic
devices.” Obey all signs and instructions.
3.5.4 Batteries
Batteries can cause property damage and/or bodily injury
such as burns if a conductive material such as jewellery,
keys, or beaded chains touch exposed terminals. The
conductive material may complete an electrical circuit (short
circuit) and become quite hot. Exercise care in handling any
charged battery, particularly when placing it inside a pocket,
bag, or other container with metal objects. Use only
Motorola original batteries and chargers.
Your battery or phone may contain symbols, defined as
follows:
SymbolDefinition
Important safety information will follow.
Your battery or phone should not be
disposed of in a fire.
V1050.3G.UG.book Page 9 Tuesday, March 29, 2005 10:39 AM
Seizures/Blackouts3.6
SymbolDefinition
Your battery or phone may require
recycling in accordance with local laws.
Contact your local regulatory authorities
for more information.
Your battery or phone should not be
thrown in the trash.
LiIon BATT
Your phone contains an internal lithium
ion battery.
3.6 Seizures/Blackouts
Some people may be susceptible to epileptic seizures or
blackouts when exposed to blinking lights, such as when
watching television or playing video games. These seizures
or blackouts may occur even if a person never had a previous
seizure or blackout.
If you have experienced seizures or blackouts, or if you have
a family history of such occurrences, please consult with
your doctor before playing video games on your phone or
enabling a blinking-lights feature on your phone. (The
blinking-light feature is not available on all products.)
Parents should monitor their children's use of video game or
other features that incorporate blinking lights on the phones.
All persons should discontinue use and consult a doctor if
any of the following symptoms occur: convulsion, eye or
muscle twitching, loss of awareness, involuntary
movements, or disorientation.
To limit the likelihood of such symptoms, please take the
following safety precautions:
• Do not play or use a blinking-lights feature if you are
tired or need sleep.
• Take a minimum of a 15-minute break hourly.
• Play in a room in which all lights are on.
• Play at the farthest distance possible from the screen.
3.7 Repetitive Motion Injuries
When you play games on your phone, you may experience
occasional discomfort in your hands, arms, shoulders, neck,
or other parts of your body. Follow these instructions to
avoid problems such as tendonitis, carpal tunnel syndrome,
or other musculoskeletal disorders:
Safety and General Information 9
V1050.3G.UG.book Page 10 Tuesday, March 29, 2005 10:39 AM
3.7Repetitive Motion Injuries
• Take a minimum 15-minute break every hour of game
playing.
• If your hands, wrists, or arms become tired or sore
while playing, stop and rest for several hours before
playing again.
• If you continue to have sore hands, wrists, or arms
during or after play, stop playing and see a doctor.
10 Safety and General Information
European Union Directives Conformance Statement
Hereby, Motorola declares that this product is in compliance
with
• The essential requirements and other
relevant provisions of Directive 1999/5/EC
• All other relevant EU Directives
IMEI: 350034/40/394721/9
0168
Type: MC2-41H14
The above gives an example of a typical Product Approval
Number.
You can view your product's Declaration of Conformity
(DoC) to Directive 1999/5/EC (the R&TTE Directive) at
www.motorola.com/rtte - to find your DoC, enter the product
Approval Number from your product's label in the "Search"
bar on the Web site
Product
Approval
Number
V1050.3G.UG.book Page 11 Tuesday, March 29, 2005 10:39 AM
Basics4
4Basics
4.1 About This Guide
This guide describes the basic features of your Motorola
mobile phone.
To obtain another copy of this guide, see the Motorola Web
site at:
www.hellomoto.com
A Quick Start Guide for this product is also available.
4.1.1 Optional Features
This label identifies an optional network, SIM
card, or subscription-dependent feature that may
not be offered by all service providers in all
geographical areas. Contact your service provider
for more information.
4.1.2 Optional Accessories
This label identifies a feature that requires an
optional Motorola Original™ accessory.
4.2 Installing the USIM, SIM, or Memory
Cards
Caution: Do not bend or scratch your card. Avoid exposing
your card to static electricity, water, or dirt.
Your 3G USIM (Universal IC Card) contains your phone
number, service details, and contacts list/message memory.
Your phone can use GSM SIM (Subscriber Identity Module)
cards, but not all features will be available.
12
Basics 11
V1050.3G.UG.book Page 12 Tuesday, March 29, 2005 10:39 AM
4.3Memory Card
To show the amount of free space on either the Phone
34
4.3 Memory Card
Insert the Memory Card next to the SIM card (see above)
underneath the phone battery.
The Memory Card provides you with a larger storage
capacity than the Phone Memory. When you download for
example pictures, sounds, video clips or Java applications,
they will be saved to the Memory Card.
Memory or the Memory Card, press
> Phone Status > Storage Devices. Scroll to the desired storage
device and press Details. See “Viewing and Managing
Pictures” on page 29.
If you have a TransFlash removable memory card,
the use of an SD adapter allows you to use it in
other devices that are compatible with SD cards
(for example, digital cameras, laptops,
mp3-players).
M and select Settings
12 Basics
V1050.3G.UG.book Page 13 Tuesday, March 29, 2005 10:39 AM
Battery Tips4.4
4.4 Battery Tips
Battery life depends on the network, signal strength,
temperature, features, and accessories you use.
• Always use Motorola Original batteries and
battery chargers. The warranty does not
cover damage caused by non-Motorola
batteries and/or chargers.
• New batteries or batteries stored for a long time may
take more time to charge.
• When charging your battery, keep it near room
temperature.
• When storing your battery, keep it uncharged in a cool,
dark, dry place, such as a refrigerator.
• Never expose batteries to temperatures below -10°C
(14°F) or above 45°C (113°F). Always take your phone
with you when you leave your vehicle.
• It is normal for batteries to gradually wear down and
require longer charging times. If you notice a change in
your battery life, it is probably time to purchase a new
battery.
Contact your local recycling centre for proper battery
disposal.
Warning: Never dispose of batteries in a fire because
they may explode.
Before using your phone, please read the battery safety
information in the Safety and General Information section
included in this guide.
Basics 13
V1050.3G.UG.book Page 14 Tuesday, March 29, 2005 10:39 AM
4.5Installing the Battery
4.5 Installing the Battery
Your phone is designed to use only
Motorola Original™ batteries and accessories.
12
3
14 Basics
4.6 Using Your Charger
The battery charger shipped with this device is specifically
designed for use with Motorola 3G mobile phones. Inserting
a non-compatible charger might cause the phone to shut
down and begin charging at a very slow rate. When an
incompatible charger is attached, you might not be able to
make and receive calls.
Please use only the following charger kits with this device:
• CH620 rapid charger, kit number CFPN1108AB,
including:
- SPN5195A charger (SPN5049A in plastic bag)
- SYN7455A UK plug & SYN7456A Euro plug
• VC600 in car rapid charger, kit number CFLN1306AB –
(includes: SYN0707B)
4.7 Charging the Battery
New batteries are shipped partially charged. Before using
your phone, please install and fully charge the battery as described below. Some batteries perform best after several
full charge/discharge cycles.
V1050.3G.UG.book Page 15 Tuesday, March 29, 2005 10:39 AM
Turning Your Phone On4.8
Action
1 Plug the travel
charger into your
phone with the
release tab facing
up.
2 Plug the other end of the travel charger into the
appropriate electrical outlet.
3 When your phone indicates Charge Complete, press the
release tab and remove the travel charger.
Tip: You can safely leave the travel charger connected to
your phone after charging is complete. This will not damage
the battery.
4.8 Turning Your Phone On
Action
1 Open your phone.
2 Press and hold
for 2 seconds to
turn on the phone.
3 If necessary, enter your SIM card PIN code and press
the OK key to unlock the SIM card.
Caution: If you enter an incorrect PIN code 3 times in
a row, your SIM card is disabled and your phone
displays SIM Blocked.
4 If necessary, enter your four-digit unlock code and
press OK key to unlock the phone.
Tip: The unlock code is originally set to 1234. Your
service provider may change this number before you
receive your phone.
Power
Key
Basics 15
V1050.3G.UG.book Page 16 Tuesday, March 29, 2005 10:39 AM
4.9Adjusting Volume
4.9 Adjusting Volume
Press the up or down
volume keys to:
• increase or decrease
earpiece volume
during a call
• increase or decrease speakerphone volume during a
call
• turn off an incoming call alert
• increase or decrease the ringer volume setting when
the home screen is visible
Tip: At the lowest volume setting, press the down
volume key once to switch to vibrate alert. Press it
again to switch to silent alert. Press the up volume key
to cycle back to vibrate alert, then ring alert.
16 Basics
Volume
Keys
4.10 Making a Call
To make video calls, see page 35.
PressTo
1 keypad keysdial the phone number
2make the call
3end the call and “hang up” the phone
Tip: You can also close the phone to end the call.
Note: You can make an emergency call even when the phone
is locked, or when a SIM card is not inserted (see page 55).
when you are finished
4.11 Answering a Call
When you receive a call, your phone rings and/or vibrates
and displays an incoming call message.
When Open to Answer is On, open the phone to answer the call.
To set Opento Answer, press
> Answer Options > Open to Answer.
M > Settings > In-Call Setup
V1050.3G.UG.book Page 17 Tuesday, March 29, 2005 10:39 AM
Changing the Call Alert4.12
If Open to Answer is Off:
PressTo
1
or
Divert or divert the call to your voicemail or call
2end the call and “hang up” the phone
answer the call
divert number, as though your line
was busy
when you are finished
4.12 Changing the Call Alert
To set your Ring Style, press M > Settings > Ring Styles (see
page 51).
Shortcut: In the home screen, press the down volume key to
switch the alert for incoming calls and other events to vibrate
alert, then silent alert. Press the up volume key to reset ring
alert.
4.13 Viewing Your Phone Number
To view your phone number from the home screen, press
M#.
While you are on a call, press M > My Tel. Numbers.
Note: Your phone number must be stored on your SIM card
to use this feature. To store your phone number on the SIM
card, see page 51. If you do not know your phone number,
contact your service provider.
Basics 17
V1050.3G.UG.book Page 18 Tuesday, March 29, 2005 10:39 AM
4.14Entering Text
4.14 Entering Text
Some features require you to enter information.
Entry Details
Name: John Smith
Press S to
scroll down to
other options.
Press
key to save
changes.
18 Basics
No.: 2125551212
Type: Work
Store To: Phone
Voice Name:
Speed #: 2
Category: General
Ringer ID: Continental
DoneCancel
Done
Press
changes.
$
Cancel
key to exit without making
Highlighted
Option
The message centre lets you compose and send text
messages.
For indicator
descriptions,
see following
section.
Flashing
cursor
indicates
insertion point.
Vh
Send toInsert
Press Send to to enter the
recipient.
Msg
M
450
Press
M
open submenu.
Press
Insert
to insert a
quick note,
picture, or
sound.
4.14.1 Choosing a Text Entry Mode
Multiple text entry modes make it easy for you to enter
names, numbers, and messages. The mode you select
remains active until you select another mode.
to
V1050.3G.UG.book Page 19 Tuesday, March 29, 2005 10:39 AM
Choosing a Text Entry Mode4.14.1
# in any text entry screen to select one of the
Press
following entry modes:
PrimaryThe primary text entry mode (see the
following section).
NumericEnter numbers only (see page 24).
SymbolEnter symbols only (see page 24).
SecondaryThe secondary text entry mode (see
Alternatively, you can select a text entry mode in any text
entry screen by pressing
below to set).
M > Entry Mode.
Setting Up a Text Entry Mode
Press M > Entry Setup from any text entry screen. Select
Primary Setup or Secondary Setup, and choose:
iTAPLet the phone predict each word as
you press keys (see page 22).
TapEnter letters and numbers by pressing
a key one or more times.
Tap ExtendedEnter letters, numbers, and symbols
by pressing a key one or more times.
NoneHide the Secondary setting (only
available for Secondary Setup).
Using Capitalisation
Press 0 in any text entry screen to change text case. The
following indicators show capitalisation status:
= no capital letters= capitalise next letter
only
= all capital letters
Text Entry Mode Indicators
When you select the Primary or Secondary text entry mode, the
following indicators identify the text entry setting:
PrimarySecond.
Tap, no capital letters
Tap, capitalise next letter
only
Basics 19
V1050.3G.UG.book Page 20 Tuesday, March 29, 2005 10:39 AM
4.14.2Using Tap Mode
PrimarySecond.
Tap, all capital letters
iTAP, no capital letters
iTAP, capitalise next letter
only
iTAP, all capital letters
Two other indicators identify Numeric (Ã) or Symbol (Ä)
entry modes.
4.14.2 Using Tap Mode
This is the standard mode for entering text on your phone.
Regular Tap mode cycles through the letters and number of
the key you press. Tap Extended also cycles through additional
symbols as shown in the chart on page 22.
20 Basics
PressTo
1 A keypad key one
or more times
2 keypad keysenter remaining characters
In a text entry screen, you can press
modes. If Tap or Tap Extended is not available as the Primary or
Secondary entry mode, see page 19.
select a letter, number, or symbol
Tip: Press
word completion, or
a space.
S right to accept a
* to insert
# to switch entry
V1050.3G.UG.book Page 21 Tuesday, March 29, 2005 10:39 AM
Using Tap Mode4.14.2
When you enter text with Tap or Tap Extended, the soft key
functions change.
K
Block cursor
indicates
highlighted
character.
After 2 seconds,
character is
accepted and
cursor moves to
next position.
Msg
Vh
T
Send toCancel
Press
recipient.
Send to
M
to enter the
449
Press
delete character
to left of
insertion point.
Press
Cancel
exit without
storing
changes.
to
to
When you enter 3 or more characters in a row, your phone
may guess the rest of the word. For example, if you enter prog
you might see:
Flashing
cursor
indicates
insertion point.
If you want a different word (such as progress), continue
pressing keypad keys to enter the remaining characters.
Vh
This is a prog ram
Send toCancel
Msg
433
Press
S
right
to accept
program
, or
press
*
to
reject it and
enter a space
after
prog
.
M
Basics 21
V1050.3G.UG.book Page 22 Tuesday, March 29, 2005 10:39 AM
4.14.3Using iTAP™ Mode
Character Chart
Use this chart as a guide for entering characters with
Note: This chart may not reflect the exact character set
available on your phone. In an email address or URL editor,
1 first shows common characters for that editor.
Tap Text Entry Rules
• Press a keypad key repeatedly to cycle through its
characters.
• Press
• The first character of every sentence is capitalised. If
• If you enter or edit information and do not want to save
S left or right to move the flashing cursor to
the left or right in a text message.
necessary, press
lowercase before the cursor moves to the next
position.
the changes, press to exit without saving.
S down to force the character to
4.14.3 Using iTAP™ Mode
iTAP™ software provides a predictive text entry mode that
lets you enter a word using one keypress per letter. This can
be faster than Tap, because your phone combines the
keypresses into common words.
V1050.3G.UG.book Page 23 Tuesday, March 29, 2005 10:39 AM
Using iTAP™ Mode4.14.3
For example, if you press
that match your keypresses display:
Press C to
delete
character to
left of
insertion
point.
Press
Select
to
lock
highlighted
combination.
If you want a different word (such as Progress), continue
pressing keypad keys to enter the remaining characters.
7764, letter combinations
433
c
Press
to accept
Program
Press
to highlight
another
combination.
Press
enter
space.
Msg
Vh
This is a prog ram
prog spoi proh proi
SelectCancel
Press
without stroing changes.
Cancel
M
to exit
S
S
*
Prog
up
.
right
to
and a
Entering Words
In a text entry screen, you can press # to switch entry
modes. An indicator shows which mode is active (see
page 19). If iTAP mode is not available as the Primary or
Secondary entry mode, see page 19.
PressTo
1 keypad keys (one
press per letter)
2
S left or right highlight the combination you
3 Select key
or
show possible letter
combinations at the bottom of
the screen
want
lock a highlighted combination
You can press keypad keys to
add more letters to the end of
the combination.
Basics 23
V1050.3G.UG.book Page 24 Tuesday, March 29, 2005 10:39 AM
4.14.4Using Numeric Mode
PressTo
*
If you enter a word your phone does not recognise, the
phone stores it to use as one of your word options. When
you fill memory space for unrecognised words, your phone
deletes the oldest words to add new words.
enter the highlighted
combination when it spells a
word
A space is automatically inserted
after the word.
4.14.4 Using Numeric Mode
In a text entry screen, press # to switch entry modes until
the à (Numeric) indicator displays.
Press keypad keys to enter the numbers you want. When you
finish entering numbers, press
mode.
24 Basics
# to switch to another entry
4.14.5 Using Symbol Mode
In a text entry screen, press # to switch entry modes until
the Ä (Symbol) indicator displays.
PressTo
1 keypad keys (one
press per symbol)
2
S left or righthighlight the symbol you want
3 Select keyenter the highlighted symbol
Symbol Chart
Use this chart as a guide for entering characters with symbol
mode.