M
Middle East & North Africa
Personal Communication Sector
GSM V600 - Housing Revisions (Compatibility)
Field Service Information
Our Reference: SI34_6_2004
Date: June 17, 2004
Pages (including this page): 3
Prepared by:
Mohamed Morsy
Customer Services Manager,
Middle East & North Africa
)
Classification:
Motorola Internal Information
Strictly released for Motorola Authorized Service Center Use only.
M
Middle East & North Africa
Date: June 17, 2004
Our Reference: SI34_6_2004
Product/System:
Subject:
Problem:
This is an informational bulletin detailing some recent improvements that have been made to the V600
housings. The purpose of this bulletin is to assist the field with compatibility issues and/or use questions
when replacing the V600 housings in the field.
The 0188416N01 Base F-Hsg has been modified. The new 0188416N02 part number replaces the plastic
flip stop (two raised portions of the F-Hsg that make contact with the flip at the top of the CLI Chrome Ring)
with a new flip stop design and a Sentoprene Flip Stop Pad (similar to V300/V500). Please see images
below. This was a change that had been planned for V600, since Oct. 03, from a pre-launch RASA Issue
highlighted in ALT Testing.
Note: This pre-launch issue has not been highlighted in the field with the various other CLI Lens
issues that we do have. The new flip stop does not reduce the CLI Lens issues that have been
highlighted in the field. Please reference SI28_4_2004
V600
GSM V600 - Housing Revisions (Compatibility)
FIELD SERVICE INFORMATION
for more details on these issues.
“Old” 0188416N01 F-Hsg “New” 0188416N02 F-Hsg
The 0188441N01 Base R-Hsg has been modified. The new 0188441N02 part number has additional
clearance for the new flip stop design, added RF Coupler for improved RF Stability, and some housing fit
features to the screw bosses. See images below.
“Old” 0188441N01 R-Hsg “New” 0188441N02 R-Hsg
Classification:
Motorola Internal Information
Strictly released for Motorola Authorized Service Center Use only.