Page 1
RFD8500
QUICK START GUIDE
Page 2
2 RFD8500 Quick Start Guide
Zebra reserves the right to make changes to any product to improve reliability, function, or design.
Zebra does not assume any product liability arising out of, or in connection with, the application or use of any
product, circuit, or application described herein. No license is granted, either expressly or by implication,
estoppel, or otherwise under any patent right or patent, covering or relating to any combination, system,
apparatus, machine, material, method, or process in which Zebra products might be used. An implied license
exists only for equipment, circuits, and subsystems contained in Zebra products.
Warranty
For the complete Zebra hardware product warranty statement, go to: http://www.zebra.com/warranty.
Service Information
If you have a problem using the equipment, contact your facility’s Technical or Systems Support. If there is a
problem with the equipment, they will contact the Zebra Global Customer Support Center at:
http://www.zebra.com/support.
For the latest version of this guide, localized translations, and related product guides, visit the Zebra website
at: http://www.zebra.com/support.
Page 3
Introduction
The RFD8500 reader provides Radio Frequency Identification (RFID), with optional bar code scanning
functionality. The unit can be used stand alone, or paired with a Bluetooth® wireless technology enabled host
device (such as a mobile computer and/or smartphone).
Features
RFD8500 Quick Start Guide 3
Page 4
4 RFD8500 Quick Start Guide
Using the RFD8500
To use the RFD8500 for the first time with a mobile computer, or iOS device:
•
Install the battery.
•
Charge the RFD8500.
•
Power on the RFD8500.
•
Pair the RFD8500 over Bluetooth with a mobile device.
•
Install the Demo Application, or the partner application (Android or iOS).
•
Set the region and power level (using the Demo Application, or the partner application).
Installing the Battery
Removing the Battery Cover
1. Depress both battery cover release buttons.
2. Slide back, and remove battery cover.
Page 5
RFD8500 Quick Start Guide 5
1
2
Inserting the Battery
1. Align the three tabs on the bottom of the battery with the three slots in the battery compartment.
2. Press battery towards three battery slots then press down until it locks into place.
Removing the Battery
Press in and remove battery as shown.
Page 6
6 RFD8500 Quick Start Guide
Charging
Before using the RFD8500 for the first time, charge the battery until the LED Power/Charging Indicator turns
solid green. To charge the RFD8500, use the Micro USB c able , cup charger, or cradle. The Thre e Slot Charge
Only cradle can be used to charge any combination of devices including the RFD8500, TC55, and a dual
battery charger.
Pairing
Pairing with an Android Device
To pair with an Android device, such as the TC55:
1. Power on the TC55.
2. Touch the Settings icon.
3. Turn Bluetooth on.
4. Touch Search for Devices to display available discoverable devices.
5. Turn the RFD8500 on and ensure Bluetooth is e nabled. If not, press the Bl uetooth button on th e RFD8500
for one second to make it discoverable. When discoverable, the Bluetooth LED slowly flashes blue.
6. Touch the RFD8500 in the list of available discoverable devices, and press the RFD8500 trigger to pair
when the Bluetooth LED starts flashing fast.
7. Exit the TC55 Device Settings screen, and run the RFID Demo Application.
8. From the Demo Application, select Settings > Readers List, and confirm the RFD8500 serial number with
which you paired is displayed. Select it in the list of Available Readers to connect the RFD8500 to the
TC55.
Page 7
RFD8500 Quick Start Guide 7
Pairing with an iOS Device
To pair with an iOS device, such as the iPhone 6:
1. Power on the iOS device.
2. Touch the Settings icon.
3. Touch Bluetooth to display the Bluetooth Settings screen, and ensure it is on.
4. Turn the RFD8500 on and ensure Bluetooth is e nabled. If not, press the Bluetoo th button on the RFD8500
for one second to make it discoverable. When discoverable, the Bluetooth LED slowly flashes blue.
5. Touch the RFD8500 in the list of available discoverable devices, and press the RFD8500 trigger to pair
when the Bluetooth LED starts flashing fast.
6. Exit the iPhone Device Settings screen and run the RFID Demo Application.
7. From the Demo Application, select Settings > Readers List and confirm the RFD8500 serial number with
which you paired is displayed. Select it in the list of Available Readers to connect the RFD8500 to the
iPhone.
Using the Locate Device Bar Code
The Locate Device bar code appears on the RFD8500 unde r the antenna comp artment. When you p air several
RFD8500 devices with your Android or iOS device via Bluetooth, use the serial number represented by the
Locate Device bar code to identify a specific paired RFD8500.
Page 8
8 RFD8500 Quick Start Guide
1
2
1
2
Inserting the Mobile Computer into the RFD8500
Remove the RFD8500 battery cover. Remove the plastic tip from the cover. Attach the mobile computer to its
case accessory. Attach the mobile computer case to the RFD8500 battery cover. Slide the battery cover onto
the RFD8500 until it locks in place. The battery cover buttons secure the mobile computer to the RFD8500.
Removing the Mobile Computer from the RFD8500
To remove the mobile computer, press the battery cover release buttons, and pull the mobile computer back
and up.
Page 9
RFD8500 Quick Start Guide 9
LED/Beeper Indicators
Condition Power LED Beeper
Power State Indicator (Power Button)
Low battery (20%) Solid amber No beep
Lower battery
(equal to, or less than 10%)
Critical battery (less than 5%) Solid red, then turns off Descending
Charging Blinking amber Short beep when charger is
Charged Solid green One beep
Charging error Fast blink red One beep, or repeated
Power on
Solid red Short beep sounds repeat
ONLY when the device is
NOT connected to a charger
AND when the unit is active
(not in low power mode, or
off mode)
high/medium/low beeps
before automatically
powering off
connected
beeps
•
Green if battery charge > 20%
•
Amber if battery charge between
10% - 20%
•
Red if battery charge < 10%
Low/medium/high beeps
Mode Indicator (Mode Button)
RFID mode Off Short high button
confirmation beep
Bar code mode Solid green Short high button
confirmation beep
Decode/RFID Read Indicator
Good decode Solid green Short low beep
Transmit error Solid red for 2 seconds No beep for RFID/four beeps
for scanner read
Good RFID read Solid green (for each read) Short medium beep
RFID error Solid red No beep
Other error message Solid red No beep
BT Indicator (BT Button)
BT turning off Off Long beep
Page 10
10 RFD8500 Quick Start Guide
Condition Power LED Beeper
BT on/not connected Off No beep
BT discoverable Medium flash (40 seconds only) No beep
BT on/pairing in process Fast flash No beep
BT application connected Solid blue Short low/high beeps
BT out of range Slow flash (40 seconds only) Short high/low beeps
Page 11
Scanning with the RFD8500 (Imager Units Only)
012345
012345
CORRECT
WRONG
ags
To scan bar codes:
1. Set the RFD8500 to bar code mode.
2. Aim the device at the bar code.
3. Press the trigger on the handle. The scan/deco d e LED lights, and a beep sounds to indicate a successful
decode.
RFD8500 Quick Start Guide 11
Page 12
12 RFD8500 Quick Start Guide
AVOID BENDING
Optimum Body Posture
for Low Scanning
Optimum Upright
Body Posture
Optimum Body Posture
for High Scanning
AVOID REACHING
Use a ladder
Alternate left
and right hand
Taking breaks and task rotation recommended
AVOID EXTREME
WRIST ANGLES
Optimum RFID Body Posture
Page 13
Zebra Technologies Corporation
Lincolnshire, IL U.S.A.
http://www.zebra.com
Zebra and the stylized Zebra head are trademarks of ZIH Corp., registered in many jurisdictions
worldwide. All other trademarks are the property of their respective owners.
©2015 ZIH Corp and/or its affiliates. All rights reserved.
MN002225A01EN Revision B - October 2015
Page 14
14 RFD8500 Quick Start Guide
Loading...