查询MMSZ5221BT1供应商
MOTOROLA
SEMICONDUCTOR
TECHNICAL DATA
Designer’s Data Sheet
Three complete series of Zener Diodes are offered in the convenient, surface mount
plastic SOD-123 package. These devices provide a convenient alternative to the leadless
34 package style.
• 500 mW Rating on FR-4 or FR-5 Board
• Package Designed for Optimal Automated Board Assembly
• Corrosion Resistant Finish, Easily Solderable
• ESD Rating of Class 3 (exceeding 16 kV) per the Human Body Model
• Small Package Size for High Density Applications
• Available in 8 mm Tape and Reel
Add “T1” to the device number to order the 7 inch/3000 unit reel.
Add “T3” to the device number to order the 13 inch/10,000 unit reel.
• Wafer Fab Location: Phoenix, Arizona
Assembly/Test Location: Seremban, Malaysia
MMSZ5221BT1 thru MMSZ5270BT1
• General Purpose, Medium Current
• Wide Voltage Range — 2.4 to 91 Volts
PLASTIC SURFACE
MOUNT
ZENER DIODES
500 MILLIWATTS
1.8–91 VOLTS
12
1: CATHODE
2: ANODE
CASE 425, STYLE 1
PLASTIC
DEVICE RATING
Power Dissipation on FR-4 or FR-5 Board
Derate above TL = 75°C
Thermal Resistance Junction to Lead
Thermal Resistance Junction to Ambient
Junction Temperature Range T
Storage Temperature Range T
Lead Solder Temperature – Maximum (10 sec. duration) — 260 °C
[1]
FR-4 or FR-5 = 3.5 x 1.5 inches, using the Motorola minimum recommended footprint as shown in Figure 11.
[2]
Thermal Resistance measurement obtained via Infrared Scan Method
Designer’s Data for “Worst Case’’ Conditions — The Designer’s Data Sheet permits the design of most circuits entirely from the information presented. Limit curves — representing
boundaries on device characteristics — are given to facilitate “worst case’’ design.
Designer’s is a trademark of Motorola, Inc.
Thermal Clad is a trademark of the Bergquist Company.
Preferred devices are Motorola recommended choices for future use and best overall value.
(TA = 25°C unless otherwise noted)
Rating
[1]
[2]
[2]
Symbol Value Unit
R
R
P
—
θJL
θJA
stg
D
J
500
6.7
150
340
–55 to +150 °C
–55 to +150 °C
mW
mW/°C
°C/W
Motorola TVS/Zener Device Data
500 mW Leadless (SOD-123) Data Sheet
7-1
MMSZ5221BT1 Series
Test
I
mA
[1]
), (VF = 0.9 V Max. @ IF = 10 mA for all types)
Max Reverse
Leakage
Current
Z
ZT
@ IZ = I
Ω
Max Zener
Impedance
@ IZK = 0.25 mA
ZT
[3]
Z
ZK
Ω
@
µA
ELECTRICAL CHARACTERISTICS
Type
Number
MMSZ5221BT1
MMSZ5222BT1
Marking
C1 2.4 2.28 2.52 20 30 1200 100 1
C2 2.5 2.38 2.63 20 30 1250 100 1
(TA = 25°C unless otherwise noted
Zener Voltage
VZ @ I
ZT
Volts
[1] [2]
Current
Nom Min Max
MMSZ5223BT1 C3 2.7 2.57 2.84 20 30 1300 75 1
MMSZ5224BT1 C4 2.8 2.66 2.94 20 30 1400 75 1
MMSZ5225BT1
C5 3.0 2.85 3.15 20 30 1600 50 1
MMSZ5226BT1 D1 3.3 3.14 3.47 20 28 1600 25 1
MMSZ5227BT1 D2 3.6 3.42 3.78 20 24 1700 15 1
MMSZ5228BT1 D3 3.9 3.71 4.10 20 23 1900 10 1
MMSZ5229BT1
MMSZ5230BT1
MMSZ5231BT1
MMSZ5232BT1
D4 4.3 4.09 4.52 20 22 2000 5 1
D5 4.7 4.47 4.94 20 19 1900 5 2
E1 5.1 4.85 5.36 20 17 1600 5 2
E2 5.6 5.32 5.88 20 11 1600 5 3
MMSZ5233BT1 E3 6.0 5.70 6.30 20 7 1600 5 3.5
MMSZ5234BT1
E4 6.2 5.89 6.51 20 7 1000 5 4
MMSZ5235BT1 E5 6.8 6.46 7.14 20 5 750 3 5
MMSZ5236BT1 F1 7.5 7.13 7.88 20 6 500 3 6
MMSZ5237BT1 F2 8.2 7.79 8.61 20 8 500 3 6.5
MMSZ5238BT1 F3 8.7 8.27 9.14 20 8 600 3 6.5
MMSZ5239BT1 F4 9.1 8.65 9.56 20 10 600 3 7
MMSZ5240BT1
F5 10 9.50 10.50 20 17 600 3 8
MMSZ5241BT1 H1 11 10.45 11.55 20 22 600 2 8.4
MMSZ5242BT1
H2 12 11.40 12.60 20 30 600 1 9.1
MMSZ5243BT1 H3 13 12.35 13.65 9.5 13 600 0.5 9.9
MMSZ5244BT1 H4 14 13.30 14.70 9.0 15 600 0.1 10
MMSZ5245BT1
MMSZ5246BT1
H5 15 14.25 15.75 8.5 16 600 0.1 11
J1 16 15.20 16.80 7.8 17 600 0.1 12
MMSZ5247BT1 J2 17 16.15 17.85 7.4 19 600 0.1 13
MMSZ5248BT1
J3 18 17.10 18.90 7.0 21 600 0.1 14
MMSZ5249BT1 J4 19 18.05 19.95 6.6 23 600 0.1 14
MMSZ5250BT1 J5 20 19.00 21.00 6.2 25 600 0.1 15
MMSZ5251BT1 K1 22 20.90 23.10 5.6 29 600 0.1 17
MMSZ5252BT1
K2 24 22.80 25.20 5.2 33 600 0.1 18
MMSZ5253BT1 K3 25 23.75 26.25 5.0 35 600 0.1 19
MMSZ5254BT1 K4 27 25.65 28.35 4.6 41 600 0.1 21
MMSZ5255BT1 K5 28 26.60 29.40 4.5 44 600 0.1 21
[1]
Nominal zener voltage is measured with the device junction in thermal equilibrium at TL = 30°C ± 1°C.
[2]
All part numbers shown indicate a VZ tolerance of ±5%.
[3]
ZZT and ZZK are measured by dividing the AC voltage drop across the device by the AC current applied. The specified limits are for I
Z(AC)
= 0.1 I
, with the AC frequency = 1 kHz.
Z(DC)
Test
V
R
Volts
500 mW Leadless (SOD-123) Data Sheet
7-2
Motorola TVS/Zener Device Data
MMSZ5221BT1 Series
Test
I
mA
[1]
), (VF = 0.9 V Max. @ IF = 10 mA for all types)
Max Reverse
Leakage
Current
Z
ZT
@ IZ = I
Ω
Max Zener
Impedance
@ IZK = 0.25 mA
ZT
[3]
Z
ZK
Ω
@
µA
ELECTRICAL CHARACTERISTICS
Type
Number
MMSZ5256BT1
Marking
M1 30 28.50 31.50 4.2 49 600 0.1 23
(TA = 25°C unless otherwise noted
Zener Voltage
VZ @ I
ZT
Volts
[1] [2]
Current
Nom Min Max
MMSZ5257BT1 M2 33 31.35 34.65 3.8 58 700 0.1 25
MMSZ5258BT1 M3 36 34.20 37.80 3.4 70 700 0.1 27
MMSZ5259BT1 M4 39 37.05 40.95 3.2 80 800 0.1 30
MMSZ5260BT1 M5 43 40.85 45.15 3.0 93 900 0.1 33
MMSZ5261BT1
N1 47 44.65 49.35 2.7 105 1000 0.1 36
MMSZ5262BT1 N2 51 48.45 53.55 2.5 125 1100 0.1 39
MMSZ5263BT1 N3 56 53.20 58.80 2.2 150 1300 0.1 43
MMSZ5264BT1 N4 60 57.00 63.00 2.1 170 1400 0.1 46
MMSZ5265BT1 N5 62 58.90 65.10 2.0 185 1400 0.1 47
MMSZ5266BT1 P1 68 64.60 71.40 1.8 230 1600 0.1 52
MMSZ5267BT1 P2 75 71.25 78.75 1.7 270 1700 0.1 56
MMSZ5268BT1 P3 82 77.90 86.10 1.5 330 2000 0.1 62
MMSZ5269BT1 P4 87 82.65 91.35 1.4 370 2200 0.1 68
MMSZ5270BT1 P5 91 86.45 95.55 1.4 400 2300 0.1 69
[1]
Nominal zener voltage is measured with the device junction in thermal equilibrium at TL = 30°C ± 1°C.
[2]
All part numbers shown indicate a VZ tolerance of ±5%.
[3]
ZZT and ZZK are measured by dividing the AC voltage drop across the device by the AC current applied. The specified limits are for I
Z(AC)
= 0.1 I
, with the AC frequency = 1 kHz.
Z(DC)
Test
V
R
Volts
Motorola TVS/Zener Device Data
500 mW Leadless (SOD-123) Data Sheet
7-3