Motorola MC74ACT620DW, MC74ACT620N, MC74AC620DW, MC74AC620N Datasheet
5-1
FACT DATA
The MC74AC620/74ACT620 octal bus transceiver is designed for asynchronous
two-way communication between data buses. The device transmits data from bus A
to bus B when T/R
= HIGH, or from bus B to bus A when T/R = LOW. The enable
input can be used to disable the device so the buses are effectively isolated.
• Bidirectional Data Path
• A and B Outputs Sink 24 mA/Source –24 mA
• ′ACT620 Has TTL Compatible Inputs
1920 18 16 15 14
21 3 4 5 6 7
V
CC
13
8
12
9
11
10
GBA
B0B1B2B3B4B5B6B
7
GAB A0A1A2A3A4A5A6A7GND
17
PIN NAMES
A0–A7Side A Inputs or 3-State Outputs
GAB Enable B Outputs
GBA
Enable A Outputs
B0–B7Side B Inputs or 3-State Outputs
TRUTH TABLE
GAB GBA
Applied
Inputs
Valid
Direction
I/P→O/P
Output
H H H A to B L
H H L A to B H
L L H B to A L
L L L B to A H
H = HIGH Voltage Level
L = LOW Voltage Level
OCTAL BIDIRECTIONAL
TRANSCEIVER WITH
3-STATE OUTPUTS
N SUFFIX
CASE 738-03
PLASTIC
DW SUFFIX
CASE 751D-04
PLASTIC
MC74AC620 MC74ACT620
5-2
FACT DATA
MAXIMUM RATINGS*
Symbol Parameter Value Unit
V
CC
DC Supply Voltage (Referenced to GND) –0.5 to +7.0 V
V
in
DC Input Voltage (Referenced to GND) –0.5 to VCC +0.5 V
V
out
DC Output Voltage (Referenced to GND) –0.5 to VCC +0.5 V
I
in
DC Input Current, per Pin ±20 mA
I
out
DC Output Sink/Source Current, per Pin ±50 mA
I
CC
DC VCC or GND Current per Output Pin ±50 mA
T
stg
Storage Temperature –65 to +150 °C
* Maximum Ratings are those values beyond which damage to the device may occur. Functional operation should be restricted to the Recommended
Operating Conditions.
RECOMMENDED OPERATING CONDITIONS
Symbol Parameter Min Typ Max Unit
′AC 2.0 5.0 6.0
VCCSupply Voltage
′ACT 4.5 5.0 5.5
V
Vin, V
out
DC Input Voltage, Output Voltage (Ref. to GND) 0 V
CC
V
VCC @ 3.0 V 150
Input Rise and Fall Time (Note 1)
′AC Devices except Schmitt Inputs
VCC @ 4.5 V 40 ns/V
r
, t
f
′AC Devices except Schmitt Inputs
VCC @ 5.5 V 25
VCC @ 4.5 V 10
tr, t
f
Input Rise and Fall Time (Note 2)
′ACT Devices except Schmitt Inputs
VCC @ 5.5 V 8.0
ns/V
T
J
Junction Temperature (PDIP) 140 °C
T
A
Operating Ambient Temperature Range –40 25 85 °C
I
OH
Output Current — High –24 mA
I
OL
Output Current — Low 24 mA
1. Vin from 30% to 70% VCC; see individual Data Sheets for devices that differ from the typical input rise and fall times.
2. Vin from 0.8 V to 2.0 V; see individual Data Sheets for devices that differ from the typical input rise and fall times.
tr, t
f
Input Rise and Fall Time (Note 2)
Loading...