Motorola MBRF20200CT Datasheet
SEMICONDUCTOR TECHNICAL DATA
Order this document
by MBRF20200CT/D
The SWITCHMODE Power Rectifier employs the Schottky Barrier principle in
a large area metal–to–silicon power diode. State–of–the–art geometry features
epitaxial construction with oxide passivation and metal overlay contact. Ideally
suited for use as rectifiers in very low–voltage, high–frequency switching power
supplies, free wheeling diodes and polarity protection diodes.
• Highly Stable Oxide Passivated Junction
• Very Low Forward Voltage Drop
• Matched Dual Die Construction
• High Junction Temperature Capability
• High dv/dt Capability
• Excellent Ability to Withstand Reverse Avalanche Energy
Transients
• Guardring for Stress Protection
• Epoxy Meets UL94, VO at 1/8″
• Electrically Isolated. No Isolation Hardware Required.
• UL Recognized File #E69369
Mechanical Characteristics
• Case: Epoxy, Molded
• Weight: 1.9 grams (approximately)
• Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable
• Lead Temperature for Soldering Purposes: 260°C Max. for 10
Seconds
• Shipped 50 units per plastic tube
• Marking: B20200
2
Motorola Preferred Device
SCHOTTKY BARRIER
RECTIFIER
20 AMPERES
150 and 200 VOL TS
1
3
1
2
3
CASE 221D–02
ISOLATED TO–220
MAXIMUM RATINGS, PER LEG
Rating Symbol Value Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
Average Rectified Forward Current Per Leg
(Rated VR) TC = 125°C Per Package
Peak Repetitive Forward Current, Per Leg
(Rated VR, Square Wave, 20 kHz) TC = 90°C
Nonrepetitive Peak Surge Current
(Surge applied at rated load conditions halfwave, single phase, 60 Hz)
Peak Repetitive Reverse Surge Current (2.0 µs, 1.0 kHz) I
Operating Junction Temperature and Storage T emperature TJ, T
Voltage Rate of Change (Rated VR) dv/dt 10,000 V/µs
V
RRM
V
RWM
V
I
F(AV)
I
FRM
I
FSM
RRM
200 Volts
R
10
20
20 Amps
150 Amps
1.0 Amp
stg
–65 to +150 °C
THERMAL CHARACTERISTICS, PER LEG
Thermal Resistance — Junction to Case R
SWITCHMODE is a trademark of Motorola, Inc.
Preferred devices are Motorola recommended choices for future use and best overall value.
θJC
3.5 °C/W
Amps
Rev 1
Rectifier Device Data
Motorola, Inc. 1996
1
MBRF20200CT
ELECTRICAL CHARACTERISTICS, PER LEG
Rating Symbol Max Unit
Maximum Instantaneous Forward Voltage (1)
(iF = 10 Amp, TC = 25°C)
(iF = 10 Amp, TC = 125°C)
(iF = 20 Amp, TC = 25°C)
(iF = 20 Amp, TC = 125°C)
Maximum Instantaneous Reverse Current (1)
(Rated dc Voltage, TC = 25°C)
(Rated dc Voltage, TC = 125°C)
DYNAMIC CHARACTERISTICS, PER LEG
Capacitance (VR = –5.0 V, TC = 25°C, Freq. = 1.0 MHz) C
(1) Pulse Test: Pulse Width = 300 µs, Duty Cycle ≤ 2.0%
v
F
i
R
T
0.9
0.8
1.0
0.9
1.0
50
500 pF
Volts
mA
100
70
50
20
10
7
5
F
I , INSTANEOUS FORWARD CURRENT (AMP)
2
1
TJ = 150°C
TJ = 125°C
TJ = 100°C
TJ = 25°C
0.2 0.4 0.6 0.8 1
vF, INSTANTANEOUS VOLTAGE (VOLTS)
Figure 1. T ypical Forward Voltage (Per Leg)
10,000
1,000
µ
100
10
R
I , REVERSE CURRENT ( A)
0.1
0.01
TJ = 150°C
TJ = 125°C
TJ = 100°C
1
TJ = 25°C
20 40 60 80 100 120 140 160 180 200
0
VR, REVERSE CURRENT (VOLTS)
Figure 2. T ypical Reverse Current (Per Leg)
2
Rectifier Device Data
Loading...