Motorola MA357, MA351, MA350, MA355, MA353 user Manual

...
Page 1
MA350 Series
Cordless Phone
Start Here>
Page 2
Page 3
Welcome
Format phone number Adjust volume Cancel Turn ringer on (up)
or off (down) Mute or unmute
microphone, delete phone numbers
Chan: Use if you hear interference or static
Redial last called number (up to 32 digits)
Talk: Turn phone on or
off, make or answer a
call, hang up
Earphone jack
Scroll down
Mem: Store phone
number in memory
6
lmn
Flash: Enter settings,
use for custom calling
Put call on hold
Scroll up
Welcome
services
1
Page 4
For a copy of a large-print version of this guide, or
for product-related questions, please contact:
1-800-353-2729 U.S.A.
On the web, please refer to: www.motorola.com/cordless
Congratulations on your purchase of a Motorola product!
Product registration is an important step toward enjoying your new Motorola product. Registering helps us facilitate warranty
Welcome
service, and permits us to contact you should your Motorola product require an update or other service. Registration is not required for warranty coverage. To register your product on­line, visit www.motorola.com/warranty/cordless.
2
1-888-390-6456 TTY (Text Telephone)
1-800-461-4575 Canada
Page 5
Please retain your original dated sales receipt for your records. For warranty service of your Motorola Personal Communications Product, you will need to provide a copy of your dated sales receipt to confirm warranty status
MOTOROLA, the Stylized M Logo, and all other trademarks indicated as such herein are trademarks of Motorola, Inc. ® Reg. U.S. Pat. & Tm. Off. All other product or service names are the property of their respective owners.
© 2002 Motorola, Inc. All rights reserved. Personal Communications Sector 1500 Gateway Blvd., Boynton Beach, FL 33426-8292 6881040B50-B
Welcome
3
Page 6
FCC and Interference
Information . . . . . . . . . . . . . 6
Important Safety
Information . . . . . . . . . . . . 13
Getting Started . . . . . . . . . . 18
Installing the Belt Clip....18
Battery Safety
Instructions ..................19

Contents

Charging the Battery .....20
Installing the Phone
on a Desk ....................23
4
Contents
Installing the Phone
on a Wall..................... 24
Setting Up the Phone.... 28
Using Your Phone . . . . . . . . .31
Making a Call ................ 31
Answering a Call........... 31
Adjusting the Volume.... 31
Ending a Call ................ 32
Redialing a Number ...... 32
If You Hear Interference
on the Line.................. 32
Page 7
Contents
How to Find a Lost
Handset.......................33
Saving a Number in
Memory .......................33
Dialing a Number from
Memory .......................36
Deleting Numbers from
Memory .......................37
Using Caller ID ..............37
Dialing a Number from
the Caller ID List .........38
Deleting Numbers from
the Caller ID List......... 38
Storing a Caller ID
Number in Memory..... 39
Storing and Calling
Emergency Numbers.. 40
Troubleshooting. . . . . . . . . . 41
Motorola Limited Warranty . 45
Contents
5
Page 8

FCC and Interference Information

This equipment complies with Parts 15 and 68 of the FCC rules and the requirements adopted by the Administrative Council for Terminal Attachments (ACTA).
A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details.
Notification of the Local Telephone Company
On the bottom of this equipment is a label that contains, among other information, a product identifier in the form
FCC and Interference
US:AAAEQ##TXXXX. You must, upon request, provide this information to your telephone company.
6
Page 9
The digits represented by ## in the product identifier indicate the Ringer Equivalency Number (REN) for this equipment. The REN is useful in determining the number of devices you may connect to your telephone line and still have all of these devices ring when your telephone number is called. In most (but not all) areas, the sum of the RENs of all devices connected to one line should not exceed 5. To be certain of the number of devices you may connect to your line as determined by the REN, contact your local telephone company.
Notes:
• This equipment may not be used on coin service provided by the telephone company.
• Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission or corporation commission for information.
FCC and Interference
7
Page 10
• If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this cordless phone does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer.
• Notice must be given to the telephone company upon perma­nent disconnection of your telephone from your line.
• The FCC requires that you connect your cordless telephone to the nationwide telephone network through a modular tele­phone jack (USOC RJ11C/RJ11W or RJ14C/RJ14W).
Rights of the Telephone Company
Should your equipment cause trouble on your line which may harm the telephone network, the telephone company shall,
FCC and Interference
where practicable, notify you that temporary discontinuance of service may be required. Where prior notice is not practical and
8
Page 11
the circumstances warrant such action, the telephone company may temporarily disconnect service immediately. In case of such temporary discontinuance, the telephone company must:
(1) Promptly notify you of such temporary discontinuance; (2) Afford you the opportunity to correct the situation; (3) Inform you of your right to bring a complaint to the Commission pursuant to procedures set forth in Subpart E of Part 68, FCC Rules and Regulations.
The telephone company may make changes in its facilities, equipment, operations, or procedures that could affect the operation of the equipment. If this happens, the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service.
FCC and Interference
9
Page 12
Interference Information
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
• This device may not cause harmful interference; and
• This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
FCC and Interference
with the instructions, may cause harmful interference to radio
10
Page 13
communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment on and off, the user is encouraged to try to correct the interference with one or more of the following measures:
• Reorient or relocate the receiving antenna (that is, the anten-
na for the radio or television that is “receiving” the interfer­ence).
• Reorient or relocate and increase the separation between the
telecommunications equipment and the receiving antenna.
• Connect the telecommunications equipment into an outlet on
a circuit different from that to which the receiving antenna is connected.
11
FCC and Interference
Page 14
If these measures do not eliminate the interference, please consult your dealer or an experienced radio/television technician for additional suggestions. Also, the Federal Communications Commission has prepared a helpful booklet, “How to Identify and Resolve Radio/TV Interference Problems.” This booklet is available from the U.S. Government Printing Office, Washington, D.C. 20402. Please specify stock number 004-000-00345-4 when ordering copies.
The FCC requires this product to be serviced only by Motorola or its authorized service agents. Changes or modifications not expressly approved by Motorola could void not only the user's authority to operate the equipment, but also the limited warranty.
Hearing Aid Compatibility
FCC and Interference
This telephone system meets the FCC standards for hearing aid compatibility.
12
Page 15

Important Safety Information

Follow these safety precautions when using your cordless phone to reduce the risk of fire, electric shock and injury to persons or property:
To reduce risk of fire and shock:
1. Keep all slits and openings of the phone unblocked. Do not
set the phone on a heating register or over a radiator. Ensure that proper ventilation is provided at the installation site.
2. Do not use while wet or while standing in water.
3. Do not use this product near water (for example, near a
bath tub, kitchen sink, or swimming pool).
4. Do not allow anything to rest on the power cord. Place the
power cord so that it will not be walked on.
13
Safety Information
Page 16
5. Never insert objects of any kind into the product slits as
that may result in fire or shock.
6. Unplug this product from the wall outlet before cleaning.
Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
7. Do not disassemble this product. If service or repair work
is required, contact the Motorola address found in the back of this user’s guide.
8. Do not overload wall outlets and extension cords.
9. Avoid using during an electrical storm. Use a surge protec-
tor to protect the equipment.
10. Do not use this cordless phone to report a gas leak, espe-
cially if you are in the vicinity of the gas line.
Safety Information
14
Page 17
Unplug this cordless phone immediately from an outlet if:
• The power cord or plug is damaged or frayed.
• Liquid has been spilled into the product.
• The product has been exposed to rain or water. Do not retrieve
the handset or base until after you have unplugged the power and phone from the wall. Then retrieve the unit by unplugged cords.
• The product has been dropped or the cabinet has been
damaged.
• The product exhibits a distinct change in performance.
15
Safety Information
Page 18
Installation Guidelines
1. Read and understand all instructions and save them for
future reference.
2. Follow all warnings and instructions marked on the prod-
uct.
3. Do not install this product near a bath tub, sink or shower.
4. Operate this phone using only the power source that is
indicated on the marking label. If you are unsure of the power supply to your home, consult with your dealer or local power company.
5. Do not place this product on an unstable cart, stand or
table. This product may fall, causing serious damage to the
Safety Information
product.
16
Page 19
6. Adjust only those controls that are covered by the operat-
ing instructions. Improper adjustment of other controls may result in damage and will often require extensive work to restore the product to normal operation.
7. Clean this product with a soft, damp cloth. Do not use
chemicals or cleaning agents to clean this phone.
8. Use only the power supply that came with this unit. Using
other power supplies may damage the unit.
9. Because cordless phones operate on electricity, you
should have at least one phone in your home that isn’t cordless, in case the power in your home goes out.
10. To avoid interference to nearby appliances, do not place
the base of the cordless phone on or near a TV, microwave oven, or VCR.
17
Safety Information
Page 20

Getting Started

Before you can make or answer calls, you need to install and set up your cordless phone. The next few pages walk you through the installation and setup process.

Installing the Belt Clip

Insert the tabs of the belt clip into the slots on the handset.
Getting Started
18
Page 21

Battery Safety Instructions

• Do not burn, disassemble, mutilate, or puncture the battery. The battery contains toxic materials that could be released, resulting in injury.
Caution:
There is a risk of explosion if you replace the battery with an incorrect battery type. Use only the battery that came with your phone or an authorized replacement recommended by the manu­facturer.
• Keep batteries out of the reach of children.
• Remove batteries if storing over 30 days.
• Do not dispose of batteries in fire, which could result in explosion.
• The rechargeable batteries that power this product must be disposed of properly and may need to be recycled. Refer to your battery’s label for battery type. Contact your local
recycling center for proper disposal methods.
Getting Started
19
Page 22

Charging the Battery

Red Black
1. Remove the battery door.
2. Plug the battery connector into the receptacle in the bat­tery compartment.
3. Insert the battery into the battery compartment and replace the battery door.
Slide
Getting Started
battery door down to remove
20
Page 23
4. Plug the power cord into the back of the phone and into an outlet.
21
Getting Started
Page 24
5. Rest the handset in the base so the
charge/page
lights.
6. Charge the battery for at least 12 hours. Do not plug the phone into the phone jack until the battery is fully charged.
me m
m ute
1
2
3
4
5
6
7
8
9
0
0
0
Getting Started
22
LED
Page 25

Installing the Phone on a Desk

Getting Started
23
Page 26

Installing the Phone on a Wall

1. Remove the twist-tie from the phone cord. Do not unfold the cord.
2. Untuck both ends of the cord.
3. Hold the folded cord at the center and insert it into the back of the bracket.
Getting Started
24
Page 27
4. Plug the phone cord into the phone jack on the wall.
5. Hang the bracket on the phone wall plate.
Getting Started
25
Page 28
6. Plug the other end of the phone cord into the jack on the back of the base.
7. Plug the power cord into a power outlet if it is not already plugged in.
Getting Started
26
Page 29
8. Insert the four tabs on the wall mount into the four slots on the back of the base, then push down.
mem
mute
1
2
3
4
5
6
7
8
9
0
0
0
27
Getting Started
Page 30

Setting Up the Phone

1. Press
flash
.
2. Set the language by pressing the number key indicated on the display.
3. Press
flash
.
If you live in an area with 7-digit dialing and you subscribe to caller ID service with your phone company:
enter your 3-digit area code and press
flash
.
If you live in an area with 10-digit dialing (3-digit area code + 7-digit phone number), or if you do not subscribe to caller ID service with your phone company:
Getting Started
press
flash
to go to the next prompt (do not enter your
area code).
28
Page 31
4. Set the ring sound. Each sound plays as you select it.
\ Ring tone 1 (soft ring) ] Ring tone 2 (loud ring) ^ Musical
5. Press
flash
.
6. Set touch tone or pulse operation. It is recommended that you always choose touch tone dialing unless it is not avail­able in your area.
\ touch tone ] pulse
Press flash. Note: If you select pulse, you can still use touch tone
menu systems. To activate touch tone temporarily for one call, press * before you dial.
29
Getting Started
Page 32
7. At the
Set to Default
prompt, press:
] (no) to save the settings you just entered. Your
settings will be retained after you turn the phone off.
\ (yes) to restore the factory default settings.
Now that you have set up your phone, read the next section of this guide for information on how to make calls and store phone numbers into memory.
CAUTION
The long-term characteristics or the possible physiological effects of Radio Frequency (RF) electromagnetic fields have
Getting Started
not been evaluated by UL. If you are concerned with the risk of RF exposure, you may
want to limit the duration of calls and position the antenna as far away from your body as is practical.
30
Page 33

Using Your Phone

See page 1 for a basic phone diagram.

Making a Call

Press Talk. When you hear the dial tone, dial the number.

Answering a Call

Press Talk.

Adjusting the Volume

Press to make caller’s voice
louder
softer
Using Your Phone
31
Page 34

Ending a Call

Press Talk or place the phone in the base.

Redialing a Number

Your phone remembers the last number you dialed, even if the call did not connect (for example, if the number was busy). To redial the last called number:
1. Press
2. Press

If You Hear Interference on the Line

Talk
Redial
.
.
If you hear other calls, static, or noise on the line, or if the signal is weak, press chan until you get on a clear channel
Using Your Phone
without interference.
32
Page 35

How to Find a Lost Handset

1. Press the
page
button on the top of the base.
2. Follow the sound to locate the handset.
3. Press

Saving a Number in Memory

page
again to stop the beeping.
Memory dialing makes it easy to dial phone numbers you call frequently. You can store 10 phone numbers in memory. Each phone number can have up to 20 digits.
1. Turn the phone off by pressing
Talk
until you do not hear a
dial tone.
2. Press
3. Press any number key (
mem
.
Ñ
through É) to store the phone
number in that memory location.
4. Press
mem
.
33
Using Your Phone
Page 36
5. Enter the name you want to store. The following table shows how many times to press each letter on the keypad
to enter letters and special characters.
Number of Presses
Using Your Phone
34
Button
1
2
3
4
5
6
7
8
9
1 2 3 4
space - * !
ABC( DEF ) GH I $ JKL ‘ MNO ; PQRS TUV?
WX Y Z
Page 37
6. Press
mem
.
7. Enter the phone number you want to store. To insert a pause in the number (for example, if you have
to dial 9 for a dial tone), press
#
twice (a P appears in the
number). To store the last number you dialed, press
redial
of entering a phone number.
8. Press
mem
.
instead
Using Your Phone
35
Page 38

Dialing a Number from Memory

1. Press â.
2. Press
3. Press the number key (
mem
.
Ñ
through É) to select the
memory location of the phone number you want to call.
You can use memory numbers to simplify calling card calls and other calls that require multiple strings of numbers. For example, if you stored your calling card number in memory location 1, your calling card password in location 2, and the phone number you want to call in location 3, you would press the following keys to call the number in location 3:
â mem \ mem ] mem ^
Using Your Phone
36
Page 39

Deleting Numbers from Memory

1. Press
2. Using
3. Press
4. When
mem
.
ò
and ú, scroll to the number you want to delete.
mute
.
Delete Entry?
the number, or
is displayed, press
c
to cancel the delete and keep the
mute
to delete
number.

Using Caller ID

When you receive a call, the phone displays one of these messages:
• NEW: You received a new call that has not been reviewed.
• REPT: You received a call that you have received on caller ID before.
• No Data: No caller ID information was sent from your phone service
provider.
37
Using Your Phone
Page 40
Your phone can hold up to 40 caller ID entries. To scroll
through the list of calls, press ò or ú.

Dialing a Number from the Caller ID List

1. Turn the phone off by pressing
Talk
until you do not hear a
dial tone.
2. Using
ò
and ú, scroll to the number you want to call.
3. To change from 7-digit dialing to 10-digit dialing or long distance format, press
frmt
until the desired format is
displayed (7, 10, or 11).
4. Press

Deleting Numbers from the Caller ID List

Using Your Phone
1. Using ò and ú, scroll to the number you want to delete.
2. Press
38
â
.
mute
.
Page 41
3. When
Delete Call ID?
delete the number, or
is displayed, press
c
to cancel the delete and keep the
mute
to
number.
To delete all numbers in the caller ID list:
1. Press ò or ú to display a number in the caller ID list.
2. Press and hold
3. Press
mute
mute
until
Delete All?
is displayed.
to delete all caller ID numbers, or c to cancel
the delete and keep the numbers.

Storing a Caller ID Number in Memory

1. Using ò and ú, scroll to the number you want to store.
2. Press
3. Press any number key (
mem
.
Ñ
through É) to store the phone
number in that memory location.
4. Press
mem
.
Using Your Phone
39
Page 42
To call a number stored in memory, see page 36.

Storing and Calling Emergency Numbers

If you store an emergency number (such as 911) or make a test call to an emergency number stored in memory, remain on the line and briefly explain to the dispatcher the reason for the call. This should be performed in off-peak hours, such as early morning or late evening.
Using Your Phone
40
Page 43

Troubleshooting

What to do if...
The phone doesn’t work at all (no lights, no dial tone)
• Check the power and phone connections. Is the power cable plugged in at both ends? Phone cable?
• Check the battery. Is it charged? Does it fit properly?
No dial tone • Check the items listed above.
• Move closer to the base.
• Verify dial tone using another phone. If you have no dial tone on that phone, call your phone company.
• Disconnect the phone and reconnect it at a different phone and power outlet.
Troubleshooting
41
Page 44
You can’t receive calls
Troubleshooting
42
• Check the battery. Is it charged? Does it fit properly?
• Verify that the handset ringer is turned on.
• Move closer to the base.
• Unplug other phones. You may have too many phones on your telephone line to allow all of them to ring.
Page 45
The signal is weak or has noise or static
You hear other calls on your line
• Press chan to select a different channel.
• Check the battery and power.
• Move closer to the base.
• Move the base to a different power outlet (especially if the phone is sharing an outlet with an appliance).
• Press chan to select a different channel.
• Hang up. Place the handset into the base. Wait 30 seconds then try again.
• Disconnect the base from power and phone.
Troubleshooting
43
Page 46
The battery won’t charge
The battery loses charge faster than normal
Troubleshooting
Troubleshooting
44
• Check the base. Is it properly connected? Are its contacts clean and dry?
• Check the battery contacts. Make sure the battery is connected properly.
• Is it an old battery? Replace the battery.
• Is it a new battery? A new battery needs to be charged at least 12 hours before use to maintain normal talk time.
• Is it an old battery? Replace the battery.
Page 47

Motorola Limited Warranty

for Consumer Products, Accessories, and Software Purchased in the United States or Canada
What Does this Warranty Cover?
Subject to the exclusions contained below, Motorola, Inc. warrants its telephones and consumer two-way radios that operate via Family Radio Service or General Mobile Radio Service (“Products”), Motorola-branded or certified accessories sold for use with these Products (“Accessories”) and Motorola software contained on CD-Roms or other tangible media and sold for use with these Products (“Software”) to be free from defects in materials and workmanship under normal consumer usage for the period(s) outlined below. This limited warranty is a consumer’s exclusive remedy, and applies as follows to new Motorola Products, Accessories and Software purchased by consumers in the
45
Warranty
Page 48
United States or Canada, which are accompanied by this written warranty:
Products and Accessories
as defined above, unless otherwise provided for below. Length of coverage: one (1) year from the date of purchase by the first consumer purchaser of the product unless otherwise provided for below.
Decorative Accessories and Cases.
Decorative covers, bezels, PhoneWrap™ covers and cases. Length of coverage: limited lifetime warranty for the lifetime of ownership by the first consumer purchaser of the product.
Monaural Headsets.
Warranty
mono sound through a wired connection. Length of coverage: limited
Ear buds and boom headsets that transmit
lifetime warranty for the lifetime of ownership by the first consumer purchaser of the product.
Consumer Two-Way Radio Accessories.
Length of coverage:
Ninety (90) days from the date of purchase by the first consumer
46
Page 49
purchaser of the product.
Products and Accessories that are Repaired or Replaced
. Length of coverage: The balance of the original warranty or for ninety (90) days from the date returned to the consumer, whichever is longer.
Software.
Applies only to physical defects in the media that embodies the copy of the software (e.g. CD-ROM, or floppy disk). Length of coverage: ninety (90) days
from the date of
purchase.
Exclusions
Normal Wear and Tear.
Periodic maintenance, repair and replacement of parts due to normal wear and tear are excluded from coverage.
Batteries.
Only batteries whose fully charged capacity falls below 80% of their rated capacity and batteries that leak are covered by this limited warranty.
Abuse & Misuse.
Defects or damage that result from: (a)
47
Warranty
Page 50
improper operation, storage, misuse or abuse, accident or neglect, such as physical damage (cracks, scratches, etc.) to the surface of the product resulting from misuse; (b) contact with liquid, water, rain, extreme humidity or heavy perspiration, sand, dirt or the like, extreme heat, or food; (c) use of the Products or Accessories for commercial purposes or subjecting the Product or Accessory to abnormal usage or conditions; or (d) other acts which are not the fault of Motorola, are excluded from coverage.
Use of Non-Motorola Products and Accessories.
damage that result from the use of Non-Motorola branded or
Warranty
certified Products, Accessories, Software or other peripheral
Defects or
equipment are excluded from coverage.
Unauthorized Service or Modification.
Defects or damages resulting from service, testing, adjustment, installation, maintenance, alteration, or modification in any way by
48
Page 51
someone other than Motorola, or its authorized service centers, are excluded from coverage.
Altered Products.
Products or Accessories with (a) serial numbers or date tags that have been removed, altered or obliterated; (b) broken seals or that show evidence of tampering; (c) mismatched board serial numbers; or (d) nonconforming or non-Motorola housings, or parts, are excluded from coverage.
Communication Services.
Defects, damages, or the failure of Products, Accessories or Software due to any communication service or signal you may subscribe to or use with the Products, Accessories or Software is excluded from coverage.
Software Embodied in Physical Media.
No warranty is made that the software will meet your requirements or will work in combination with any hardware or software applications provided by third parties, that the operation of the software
49
Warranty
Page 52
products will be uninterrupted or error free, or that all defects in the software products will be corrected.
Software NOT Embodied in Physical Media.
Software that is not embodied in physical media (e.g. software that is downloaded from the internet), is provided
“as is” and
without warranty.
Who is Covered?
This warranty extends to the first end-user purchaser, only.
What will Motorola Do?
Motorola, at its option, will at no charge repair, replace or refund the purchase price of any Products, Accessories or
Warranty
Software that does not conform to this warranty. We may use functionally equivalent reconditioned/refurbished/pre-owned or new Products, Accessories or parts. No data, software or applications added to your Product, Accessory or Software, including but not limited to personal contacts, games and ringer
50
Page 53
tones, will be reinstalled. To avoid losing such data, software and applications please create a back up prior to requesting service.
How to Obtain Warranty Service or Other Information
USA
Canada
TTY
For
Phones Two-Way Radios Pagers
All Products
TTY
Accessories
1-800-331-6456
1-800-353-2729
1-800-548-9954
1-800-461-4575
1-888-390-6456
and
Software
, please call the telephone number
designated above for the product with which they are used.
You will receive instructions on how to ship the Products, Accessories or Software, at your expense, to a Motorola Authorized Repair Center.
51
Warranty
Page 54
To obtain service, you must include: (a) a copy of your receipt, bill of sale or other comparable proof of purchase; (b) a written description of the problem; (c) the name of your service provider, if applicable; (d) the name and location of the installation facility (if applicable) and, most importantly; (e) your address and telephone number.
What Other Limitations Are There?
ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF
Warranty
THIS LIMITED WARRANTY, OTHERWISE THE REPAIR, REPLACEMENT, OR REFUND AS PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. IN
52
Page 55
NO EVENT SHALL MOTOROLA BE LIABLE, WHETHER IN CONTRACT OR TORT (INCLUDING NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT, ACCESSORY OR SOFTWARE, OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATA, SOFTWARE OR APPLICATIONS OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE ABILITY OR INABILITY TO USE THE PRODUCTS, ACCESSORIES OR SOFTWARE TO THE FULL EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW.
Some states and jurisdictions do not allow the limitation or exclusion of incidental or consequential damages, or limitation on the length of an implied warranty, so the above limitations or exclusions may not apply to you. This
53
Warranty
Page 56
warranty gives you specific legal rights, and you may also have other rights that vary from state to state or from one jurisdiction to another.
Laws in the United States and other countries preserve for Motorola certain exclusive rights for copyrighted Motorola software such as the exclusive rights to reproduce and distribute copies of the Motorola software. Motorola software may only be copied into, used in, and redistributed with, the Products associated with such Motorola software. No other use, including without limitation disassembly of such Motorola software or exercise of the exclusive rights reserved for
Warranty
Motorola, is permitted.
54
Page 57
motorola.com
@6881040B50@
6881040B50-B
Loading...