Motorola Numeric Pager: LS350
Turn the pager on by pressing and releasing the
Read Button
(black button with green stripe border) on the front of
the unit. The unit will activate the power on chime, and
eventually display the
Standby Screen
. This screen
displays the time and date with and the Motorola icon
above the time on the display screen.
NOTE:
The Motorola icon is the on symbol. If it is not
present you will not be able to receive pages. Refer to
the
LS350 User's Guide for complete feature and programming
capabilities.
To turn the pager off, from the Standby Screen press
Button (gray button with circle imprint) twice. Then
press the
press the
Read Button until “PAGE OFF”
Select Button
(gray button with check imprint).
is displayed. Now
Menu
The screen will now display the time and date without the
Motorola icon.
To scroll through stored messages turn on the pager.
Press the
Read Button to display the number of new
messages. Continue pressing the button to display
messages until
Press the Menu Button twice until
displayed. Then press the
displayed. Now press the
“END” is displayed. To clear the messages,
“GO FOLDER” is
Read Button until “DEL ALL MS GS”
Select Button to complete the
is
deletion.
CAUTION!
The above procedure will not delete unread messages. The
pager will give an audible reminder alert every two
minutes until all the messages are read.
The
Motorola numeric pager, LS350, operates off of a
standard AAA battery. Turn unit off when not in use to
prolong battery life.
Note: Please refer to the enclosed
LS350
pamphlets for
further detail on operation and maintenance of your
pagers.
Pager System: How To Send Messages
How To Send A Page
1) To send a page using the keypad, enter the number of
the pager to be paged and then press the
“PAGE”
key. The
pager unit will vibrate or sound an alert depending on
the mode that you have chosen and the
be blinking. Press the
Read Button. The display will show
Motorola
icon will
the current number of new pages being held in memory.
See Diagram 1.
Number of New Pages
NNn
2) Press the
Read Button
NEW: 1
Diagram 1
again. The display will show the
room number from which the message was sent. See Diagram
2.
Room 10 has sent a Page.
3) Press the
Select Button and the message’s time stamp will
10
Diagram 2
display. See Diagram 3.
Page received at 11:01 AM
11:01A
Diagram 3
4) Continue to press the Read Button till
The pager will now return to the
Standby Screen.
“END” displays.
How To Send A Numerical Message
1) To send a page plus a message using the keypad, enter
the number of the pager to be paged. Now press the
“
MESSAGE” key, a numerical message (up to four digits)
and finally the “
PAGE
” key.
2) The pager unit will vibrate or sound an alert
depending on the mode that you have chosen. Press the
Read Button
. The display will show the current number of
new pages being held in memory. See Diagram 4.
Number of New Pages
NEW: 1
Diagram 4
3) Press the
Read Button on the front of the pager. The
display will show the room number and numerical message.
See Diagram 5.
Room 10 has sent a message code 1234.
10: 1234
Diagram 5
4) Press the Select Button and the message’s time stamp will
display. See Diagram 6.
Page received at 1:15 PM
1:15P
Diagram 6
How To Send An All Page
1) To send an
All Page
using the keypad, enter the number 0
or an assigned sub group number (91-99). Then press the
PAGE
“
” key. All pager units or pagers of an assigned sub
group will vibrate or sound an alert depending on the
mode that you have chosen and the
Motorola
icon will be
blinking.
Press the
Read Button
. The display will show the current
number of new pages being held in memory. See Diagram 7.
Number of New Pages
NEW: 1
Diagram 7
2) Press the
display will show the room number from which the
Read Button on the front of the pager. The
All Page
was sent. See Diagram 9.
Room 10 has sent an
10
All Page.
Diagram 9
4) Press the
Select Button and the message’s time stamp will
display. See Diagram 10.
Page received at 2:25 PM
2:25P
Diagram 10
Note: Please refer to the LS350 User's Guide for further
detail on protecting, selective deleting, and erasing
messages.
How To Set Timer with Call Back Feature
1) To set the timer using the keypad, enter the number of
minutes you would like the timer to count down. Then
press the
would like to
Now press the
"Message" key and enter the pager number you
Call Back
"Timer"
to the room you are timing down in.
key.
2) After the timer has timed down the selected pager will
vibrate or sound an alert depending on the mode that you
have chosen and the
Motorola
icon will be blinking.
Press the
Read Button. The display will show the current
number of new pages being held in memory. See Diagram
11.
Number of New Pages
NEW: 1
Diagram 11
3) Press the Select Button on the front of the pager. The
display will show the room number that the time down
procedure occurred in. See Diagram 8.
Room 6 has sent a Call Back Page.
6
Diagram 8
4) Press the Select Button again and message’s time stamp
will display. See Diagram 12.
1st Page received at 2:25 PM
1: 2:25P
Diagram 12
Note: Please refer to the LS350 User's Guide for further
detail on protecting, selective deleting, and erasing
messages.•
Loading...