Motorola HMSM4150 QUICK START GUIDE

Introduction

Congratulations on your purchase of the Motorola homesight™ Wireless Temperature Sensor. This device senses temperature changes ranging between 14 º and 104 ºF (-10 º to 40 ºC). The immersible External Temperature Probe extends the range of the temperature monitored to -40 º to 140 ºF (-40 º to 60 ºC). This Quick Start Guide describes how to set up and troubleshoot your Temperature Sensor.

Controlling Your Sensor

Using your computer and the Wireless System Controller, you locally manage your home environment with the Motorola homesight System. When configured, the system can notify you of any new events by sending an e-mail when your Temperature Sensor detects an event (a temperature change) that moves beyond the limits you specify.

How It Works

The sensor monitors ambient temperature, and, if the temperature moves beyond your set temperature range, it sends an event to your Wireless System Controller. When the External Temperature Probe is connected to the Temperature Sensor, the internal sensor element is disabled.

Package Contents

Temperature
Wireless
Sensor
HIGH 85 F
LO W 55 F
Antenna External
Temperature
Probe
Controller
Hardware Mounting Kit
Discovery
Tool
AAA
Batteries
AAA
2

Installation Overview

1 Locate the antenna and screw it into the top-right corner of the sensor, just above the air vents, until it is secure.
Note: Sharp objects should be stored out of reach of children to prevent injury.
2 . The
Insert the batteries. On the bottom of the sensor, slide open the door and insert two AAA alkaline batteries back of the battery d inserting batteries.
The sensor does not suppor power saving functionality.
oor of the sensor indicates the polarity (+ and -) of the batteries. Close the door after
t rechargeable NiCad or NiMH batteries. However, the sensor does employ built-in
3 Reg
4
ister your sensor with your Wireless System:
a. In the homesight software, click System Se
b. Select “Device Discovery”
c. Select “Start Discovery.”
d. by “Discovery” and an arrow on the device) and use
Locate the Discovery hole on the sensor (indicated the Discovery Tool to depress the hidden button.
e. stem Controller will find and register your sensor, and details of the device
After a few seconds, the Sy will appear
Mount the sensor.
ttings.
from the menu.
on the screen.
3
p
p

Feature Locator

Bottom
Back
e
o
r
f
s
b
e
ie
r
y r
e
e
t
t
v
a
o
b
c
y
r
w
is
e
e
d
v
n
s
s
c
o
e
g
i
s
e
ti
n
D
P
r
e
r
s
i
n
Battery
compartment
External
temperature
robe
Discovery
button
compartment
External
temperature
Battery
robe

Installation Hints

Please consider the following points when mounting the sensor:
The homesight Wireless Temperature Sensor is constructed of UV-resistant ABS plastic. Do not install the sensor where it is subjected directly to the elements.
This device’s communication range is up to 60 feet (18 m) from the Wireless System Controller in a typical home, depending on the number of obstacles. These can include metal framing, thick walls, and other wireless devices operating at 418 MHz. It is recommended that different positions be tried for optimal results.
4
Loading...
+ 7 hidden pages