GM338LS.02.Jun-02
MOTOROLA and the Stylized M Logo are registered in the U.S. Patent and Trademark Office.
All other product or service names are the property of their respective owners.
©Motorola, Inc. 2002.
GENERAL
* Frequency 450-520 Mhz
Channel Capacity Trunking zone capacity:15
Trunking talkgroup capacity: 16
Conventional channel capacity: 16
Power Output 1-25W
Power Supply 13.2Vdc (10.8-15.6Vdc)
Dimensions (HxWxL) 72mm x 185mm x 188mm
Weight 1.43kg
Current Drain:
Standby 0.3A
Rx @ rated, external 8 ohm 1.5A
Transmit 8A @ 25W
Operating Temperature -30 to +60 degC
Storage Temperature -55 to +85 degC
TRANSMITTER
Channel Spacing 12.5/20/25 kHz
Frequency Stability +/- 2.5ppm
Modulation limiting +/- 2.5kHz @ 12.5kHz
+/-4.0 kHz @ 20kHz
+/-5.0 kHz @ 25kHz
FM Hum & Noise -40dB @ 12.5kHz
-45dB @ 20/25kHz
Conducted/ Radiated Emissions - 36dBm < 1 GHz
- 30dBm > 1 GHz
Adjacent Channel Power - 60dB @ 12.5kHz
- 70dB @ 20/25kHz
Audio Response (from 6 dB/oct.
Pre-Emphasis 300 to 3000Hz) ETS300 & CEPT84 Annex 2
Audio Distortion @ 1000Hz, 3% typical
60% Rated max Deviation
RECEIVER
Sensitivity (12dBSINAD) 0.30uV (0.22 uV typical)
Intermodulation > 75dB
Adjacent Channel Selectivity 75dB @ 25 kHz
70 dB @ 20 kHz
65 dB @ 12.5 kHz
Spurious Rejection 75dB @ 20/25 kHz
70 dB @ 12.5 kHz
Rated Audio 3W Internal
7.5W & 13W External
Audio Distortion @ rated audio 3% typical
Hum & Noise -40dB @ 12.5kHz
-45dB @ 20/25kHz
Audio Response (from 6 dB/oct.
Pre-Emphasis 300 to 3000Hz) TIA 603 & ETS300 & CEPT84 Annex 2
Conducted Spurious Emission - 57dBm < 1 GHz
- 47dBm > 1 GHz
* Availability subject to country law and regulations / Specifications
subject to change without notice.
All specifications shown are typical. Radios meet applicable
regulatory requirements.
One-Year Warranty
Each Motorola radio is backed by a one-year warranty on radio parts
and labour.
Accelerated Life Testing
Motorola’s Accelerated Life Testing simulates five years
of hard use in real life, EIA RS-316B in Shock, Vibration,
Dust, Humidity, IP54 for Sealing.
MIL-STD 810C, D and E
Stamp of approval from the U.S. Military for use in
rough environments.
ISO 9001 Standard
Compliance with ISO 9001 Standard - an international
quality system assurance on design, development,
production, installation and servicing of a product.
PORTABLE MILITARY STANDARDS 810C, D & E
810C
Applicable MIL-STD Methods Procedures
Low Pressure 500.1 1
High Temp 501.1 1, 2
Low Temp 502.1 2
Temp. Shock 503.1 1
Solar Radiation 505.1 1
Rain 506.1 2
Humidity 507.1 2
Salt Fog 509.1 1
Dust 510.1 1
Vibration 514.2 8, 10
Shock 516.2 1, 2, 5
810D
Applicable MIL-STD Methods Procedures
Low Pressure 500.2 1
High Temp 501.2 1, 2
Low Temp 502.2 1, 2
Temp. Shock 503.2 1
Solar Radiation 505.2 1
Rain 506.2 2
Humidity 507.2 2, 3
Salt Fog 509.2 1
Dust 510.2 1
Vibration 514.3 1
Shock 516.3 1
810E
Applicable MIL-STD Methods Procedures
Low Pressure 500.3 2
High Temp 501.3 1, 2
Low Temp 502.3 1, 2
Temp. Shock 503.3 1
Solar Radiation 505.3 1
Rain 506.3 2
Humidity 507.3 3
Salt Fog 509.3 1
Dust 510.3 1
Vibration 514.4 1
Shock 516.4 1
For more information contact
Visit us at www.motorola.com.au