Motorola CB200-U, CB200-M User Manual

CB200-M
User Guide
CB200-U CB200-M
User Guide
1
2
TABLE OF CONTENTS
RF Safety & FCC...............................................................................................................................
Safety & Information........................................................................................................................
Electromagnetic Interference Compliance.......................................................................................
Industry Canada Compliance............................................................................................................
Computer Software Copyrights........................................................................................................
Documentation Copyrights...............................................................................................................
Battery Installation............................................................................................................................
Controls Interface ............................................................................................................................
LCD Display........................................................................................................................................
LCD Wakeup......................................................................................................................................
Scrolling Menu.................................................................................................................................
Frequency Selection..........................................................................................................................
Code Selection...................................................................................................................................
Message Recording..........................................................................................................................
Message Playback............................................................................................................................
Volume Adjusting..............................................................................................................................
4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
TABLE OF CONTENTS
3
LCD Contrast......................................................................................................................................
User Defined Frequencies.................................................................................................................
Software Version..............................................................................................................................
Call Cycles.........................................................................................................................................
Cycle Delay........................................................................................................................................
Inverted Codes..................................................................................................................................
Changing VHF to MURS...................................................................................................................
RF Busy Delay....................................................................................................................................
Mounting the Device........................................................................................................................
Frequency Tables - UHF ...................................................................................................................
Frequency Tables - VHF....................................................................................................................
Frequency Tables - MURS................................................................................................................
CTCSS Code Tables...........................................................................................................................
Notes.................................................................................................................................................
4
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Howev er, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
Federal Communications Commision 445 12th Street, SW Washington, DC 20554 1-888-225-5322 (1-888-CALL FCC) Voice: toll free 1-888-835-5322 (1-888-TELL FCC) TTY: toll free
RF SAFETY & FCC COMPLIANCE
The CB200 requires care in mounting and servicing. Observing the following precautions will ensure the proper function and safety of the unit.
CAUTION!
• Do not screw through the device to mount to a surface.
• Keep the Callbox away from water, high moisture, and high temperatures.
• This equipment contains potentially hazardous voltages.
• Do not attempt to disassemble the unit.
• Except for the batteries, this unit contains absolutely no user serviceable components and all service should be completed only by qualified service personnel.
• Do not dispose of batteries in fire. The batteries may explode.
• Do not open or mutilate the batteries, they contain dangerous electrolytes.
• Operating this unit in any capacity other than its intended purpose may result in system failure and possible injury and voids any and all warranty.
5
6
ELECTROMAGNETIC INTERFERENCE (EMI) COMPLIANCE
NOTE: Nearly every electronic device is susceptible to electromagnetic interference (EMI) if
inadequately shielded, designed, or otherwise configured for electromagnetic compatibility.
This device complies with part 15 of the FCC Rules and Industry Canada License-exempt RSS standard(s). Operation is subject to the following conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation of the device.
(3) Changes or modifications made to this device, not expressly approved by Motorola, could void the authority of the user to operate this equipment.
EMI COMPATIBILITY
INDUSTRY CANADA COMPLIANCE
Industry Canada (IC) statement (Canada) / Déclaration de Canada d’industrie (IC) (Canada)
IC RF Exposure Statement / Déclaration d’exposition d’IC RF
This device meets the IC requirements for RF exposure in public or uncontrolled environments.
Cet appareil est conforme aux conditions de la IC en matière de RF dans des environnements publics ou incontrôlée.
IC Warning / Avertissement d’IC This device complies with Industry Canada license exempt RSS standard(s). Operation is subject to the following two conditions: 1. this device may not cause interference, and 2. this device must accept any interference, including interference that may cause undesired operation of the device.
Cet appareil est conforme avec Industrie Canada RSS standard exempts de licence (s). Son utilisation est soumise à Les deux conditions suivantes: 1. cet appareil ne peut pas provoquer d’interférences et 2. cet appareil doit accepter Toute interférence, y compris les interférences qui peuvent causer un mauvais fonctionnement du dispositive.
7
COMPUTER SOFTWARE COPYRIGHTS
8
The Motorola Solutions products described in this manual may include copyrighted Motorola Solutions computer programs stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola Solutions certain exclusive rights for copyrighted computer programs including, but not limited to, the exclusive right to copy or reproduce in any form the copyrighted computer program. Accordingly, any copyrighted Motorola computer programs contained in the Motorola Solutions products described in this manual may not be copied, reproduced, modified, reverse-engineered, or distributed in any manner without the express written permission of Motorola Solutions. Furthermore, the purchase of Motorola Solutions products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents or patent applications of Motorola Solutions, except for the normal nonexclusive license to use that arises by operation of law in the sale of a product.
DOCUMENTATION COPYRIGHTS
No duplication or distribution of this document or any portion thereof shall take place without the express written permission of Motorola Solutions. No part of this manual may be reproduced, distributed, or transmitted in any form or by any means, electronic or mechanical, for any purpose without the express written permission of Motorola Solutions.
DISCLAIMER
The information in this document is carefully examined, and is believed to be entirely reliable. However, no responsibility is assumed for inaccuracies. Furthermore, Motorola Solutions reserves the right to make changes to any products herein to improve readability, function, or design. Motorola Solutions does not assume any liability arising out of the applications or use of any product or circuit described herein; nor does it cover any license under its patent rights, nor the rights of others.
9
10
INSTALLING THE BATTERIES
The CB200 uses six (6) AA batteries.
1. Remove the battery holder from
cardboard packaging.
2. Orient the battery holder with the
four copper contacts pointed towards you.
3. Insert the batteries following
battery sled sticker.
4. Insert battery holder into
bottom of device with the four contacts first.
5. Replace the battery holder cover.
BATTERY
HOLDER
BATTERY HOLDER
COVER
COPPER
CONTACT
BATTERY
HOLDER
-
+
CONTROL INTERFACE
Available Controls and Components
1. Menu Button
2. Enter Button
3. Esc Button
4. Display
5. Microphone
6. Wake Up Button
7. Call Button
11
12
Initial Power-Up
Once the batteries are installed in the unit, the Call Button blinks and LCD display shows
Interface ENA.
If the USB Serial Interface is not to be used, press the ESC button to exit this mode. The default status screen will be shown on the display. If nothing is pressed, the unit will en­ter sleep mode after 60 seconds and the screen will clear.
LCD DISPLAY
INTERFACE ENA
-ESC to EXIT-
Status Screen
The Status Screen toggles the current Frequency and CTCSS setting continuously.
Freq No: 6
MHZ:467.8750
Freq No: 6
MHZ:467.8750
Loading...
+ 28 hidden pages