Motorola C603 User Manual

Motorola C6

Digital Cordless Phone

For C601, C602, C603 and C604

Warning

Charge the handset for 24 hours before use.

Welcome...

to your new Motorola C6 Digital Cordless Phone!

• All handsets are fully cordless for locating anywhere within range.

• 50 Name and Number phonebook.

• Speakerphone for hands-free conversations.

• Caller ID shows you who’s calling and see details of the last 40 callers in a Calls list.*

• Redial up to 10 of the last numbers called.

• Register up to 5 handsets to a single base and register each handset with up to 4 different bases.

• Make internal calls and transfer external calls between handsets.

• Choose from 10 different ringer melodies for internal and external calls as well as numbers stored in the phonebook.

*You must subscribe to your network provider’s Caller ID or Call Waiting service for these features to work. A

subscription fee may be payable.

Please note that this equipment is not designed for making emergency telephone calls when the power fails. Alternative arrangements should be made for access to emergency services.

Need help?

If you have any problems setting up or using your C6, please contact Customer Services on (65) 68412668. Email: support@alcom.com.sg

Alternatively, you may find the answer in the ‘Help’ section at the back of this guide.

This User Guide provides you with all the information you need to get the most from your phone.

Before you make your first call, you need to set up your phone. Follow the simple instructions in ‘Getting Started’, on the next few pages.

IMPORTANT

Only use the telephone line cord supplied.

This equipment is not designed for making emergency telephone calls when the power fails. Alternative arrangements should be made for access to emergency services.

Got everything?

• C6 handset

• C6 base

• User guide

• 2 x AAA NiMH rechargeable batteries

• Power adaptor for the base

• Telephone line cord

If you have purchased a C6 multiple pack you will also have the following additional items:

• C6 handset & charger

• 2 x AAA NiMH rechargeable batteries

• Power adaptor for the charger

1. Getting started ................................................6

2. Getting to know your phone ..........................9

3. Using the phone............................................13

3.1 Switch the handset on / off ................................ 13

3.2 Calls................................................................... 13

3.2.1 Make a call ............................................ 13

3.2.2 Preparatory dialling ............................... 13

3.2.3 End a call .............................................. 13

3.2.4 Receive a call ........................................ 13

3.3 Adjust the earpiece volume ............................... 13

3.4 Secrecy.............................................................. 13

3.5 Intercom............................................................. 14

3.5.1 Make an internal call ............................. 14

3.5.2 Receive an internal call ......................... 14

3.5.3 Transfer a call ....................................... 14

3.5.4 3-way conference call ........................... 14

3.6 Hands-free speakerphone................................. 15

3.6.1 Make a hands-free call .......................... 15

3.6.2 Answer a call hands-free ...................... 15

3.6.3 Switch to hands-free during a call ......... 15

3.7 Redial ................................................................ 15

3.7.1 View or dial an entry ............................. 15

3.7.2 Copy a Redial list number to

the phonebook ...................................... 15

3.7.3 Delete an entry ...................................... 16

3.7.4 Delete the entire Redial list ................... 16

3.8 Lock/unlock the keypad ......................................16

3.9 Paging/Find handset ..........................................16

4. Phonebook.................................................... 17

4.1 Store a name and number..................................17

4.2 View or dial an entry ...........................................17

4.3 Edit a name and number ....................................18

4.4 Delete an entry ...................................................18

5. Handset settings .......................................... 19

5.1 Handset ringer volume .......................................19

5.2 Handset ringer melody .......................................19

5.3 Auto answer .......................................................19

5.4 Handset name ....................................................19

5.5 Language ...........................................................20

5.6 Key beep ............................................................20

5.7 Battery low warning beep...................................20

5.8 Out of range warning beep .................................20

5.9 Keypad lock using the menu ..............................21

6. Base settings ................................................21

6.1 Base ringer volume ............................................21

6.2 Base ringer melody ............................................21

6.3 Change base PIN code ......................................22

6.4 Dial mode ...........................................................22

6.5 Recall mode .......................................................22

6.6 Restore default settings ......................................22

6.7 Emergency default .............................................23

6.8 Eco mode ...........................................................23

6.9 Default settings .................................................. 24

7. Clock & alarm ............................................... 24

7.1 Set the date ........................................................ 24

7.2 Set the time ........................................................24

7.3 Set alarm ............................................................ 25

7.4 Switch off alarm ring........................................... 25

8. Caller ID and the Calls list........................... 25

8.1 Caller ID ............................................................. 25

8.2 Calls list ..............................................................26

8.2.1 View the Calls list .................................. 26

8.2.2 Dial a number in the Calls list ................ 26

8.2.3 Modify and dial a number in the

Calls list ................................................. 26

8.2.4 Copy a Calls list number to

the phonebook .......................................27

8.2.5 Delete an entry ...................................... 27

8.2.6 Delete the entire Calls list ...................... 27

9. Using additional handsets .......................... 28

9.1 Registering an additional handset......................28

9.2 Register a different make of handset to

your C6 base ......................................................29

9.3 Select a base .....................................................29

9.4 De-register a handset.........................................29

10. Help................................................................30

11. General information .....................................31

1. Getting started

WARNING

Do not place your C6 in the bathroom or other humid areas.

Location

You need to place your C6 base within 2 metres of the mains power and telephone wall sockets so that the cables will reach. The socket-outlet shall be installed near the equipment and shall be easily accessible.

Make sure that it is at least 1 metre away from other electrical appliances to avoid interference. Your C6 works by sending radio signals between the handset and base. The strength of the signal depends on where you place the base. Placing it as high as possible ensures the best signal.

HANDSET RANGE

The unit has a range of up to 300 metres outdoors when there is a clear line of sight between the base and handset. Any obstruction between the base and handset will reduce the range significantly. With the base indoors and the handset either indoors or outdoors, the range will normally be up to 50 metres. Thick concrete walls can severely affect the range.

SIGNAL STRENGTH

The icon on your handset indicates that you are within range of the base. When out of range of the base, the icon flashes. If you are on a call, you will hear a warning beep.

6 Getting started

The line will hang up if the handset moves out of range of the base. Move closer to the base. The handset will automatically reconnect to the base.

Setting up

IMPORTANT

The base station must be plugged into the mains power at all times. Do not connect the telephone line cord into the wall socket until the handset is fully charged. Use only the power adaptor and telephone line cord supplied with the product.

WHICH POWER ADAPTOR?

The power adaptor with a clear connecter is for the base unit and the power adaptor with a red colour connecter is for the charger unit (for multi-pack only).

Connecting the base

Plug the telephone line cord into the socket marked

on the underside of the base.

Plug the power adaptor with clear connecter into the socket marked plug the other end into the mains power wall socket. Switch on the mains power.

on the underside of the base and

Installing and charging the handset

Remove the battery cover from the back of the handset and insert the 2 x AAA NiMH rechargeble batteries supplied. Please note the ’+’ and ’-’ markings inside the battery compartment and insert in the correct direction.

Slide the battery cover back into place.

If you are charging the batteries for the first time, place the handset on the base to charge for at least 24 hours continuously.

When the handset is fully charged, icon will appear steadily on the display. Plug the other end of the telephone line cord (make sure that one end is already plugged into the base) into the telephone wall socket.

Connecting the handset and charger (for multi-pack only)

If you have purchased a multiple pack, you will need to carry out this process for all the handsets and chargers.

Plug the power adaptor with red connecter into the socket marked on the underside of the charger and plug the other end into the mains power wall socket.

Getting started 7

Slide the battery cover back into place.

If you are charging the batteries for the first time, place the handset on the charger to charge for at least 24 hours continuously.

When the handset is fully charged, icon will appear steadily on the display. The display will show the time and handset number (e.g. 2) to indicate that it is registered to the base.

IMPORTANT

Warning! Use only the approved rechargeable Ni-MH battery cells (2 x AAA Ni-MH 550mA rechargeable batteries) supplied with your C6.

BATTERY LOW WARNING

If icon flashes on the display and you hear a warning beep every minute during a call, you will need to recharge the handset before you can use it again.

When charging, icon will scroll on the display.

BATTERY PERFORMANCE

In ideal conditions, fully charged batteries should give up to 12 hours talk time and up to 250 hours standby time on a single charge*.

Note that new batteries do not reach their full capacity until they have been put to normal use for several days.

To keep your batteries in the best condition, leave the handset off the base for a few hours at a time.

Running the batteries right down at least once a week will help them last as long as possible.

The charge capacity of rechargeable batteries will reduce with time as they wear out, giving the handset less talk/ standby time. Eventually they will need to be replaced.

After charging your handset for the first time, subsequent charging time is about 6–8 hours a day. Batteries and handset may become warm during charging. This is normal.

* All talk and standby times are approximate and depend on features selected and usage pattern.

8 Getting started

Date and time

If you have subscribed to Caller ID Service, the date and time is set automatically for all handsets when you receive your first call.

If you do not have Caller ID service, you can set the date and time manually.

Set the date manually

Press m, scroll d to

The display shows

Press m to select.

Enter the date (e.g. 12--08 for 12th of August) and press

DATE-TIME

DATE SET

and press m.

m to confirm.

Set the time manually

Press m, scroll d to

Scroll d to

Enter the time in 24 hour format (e.g. 18--30 for 6:30pm) and press

Your C6 is now ready for use.

CLOCK SET

m to confirm.

DATE-TIME

and press m.

and pressm.

2. Getting to know your phone

Overview of your handset

E F

A Earpiece B Display

See page 10 for an overview of the display icons.

C Secrecy / Clear / Back

During a call, press to switch Secrecy on/off, page 13. In menu mode, press to return to previous menu or press and hold to return to standby. In editing mode, press to delete characters and digits. When viewing the redial/calls list, press to delete the displayed entry or press and hold to delete all entries.

D Menu / OK

Press to open the Menu, page 11. Press to select menu options and to confirm a displayed option.

E Redial / Up

In standby mode, press to open the redial list, page 15. During a call, press to increase earpiece volume, page 13. When the phone is ringing, press to increase the handset ringer volume, page 19.

Press to scroll through the menu options, redial list, calls list and phonebook entries.

F Calls list / Down

In standby mode, press to open the calls list, page 26. During a call, press to decrease earpiece volume, page 13. When the phone is ringing, press to decrease the handset ringer volume, page 19. Press to scroll through the menu options, redial list, calls list and phonebook entries.

G Phonebook / Exit

In standby mode, press to open the phonebook menu, page 17. When viewing the redial/calls list or when editing, press to exit and return to standby.

Getting to know your phone 9

H Hands-free

During a call, press to switch hands-free on and off, page 15.

I Talk / End call

Press to make, receive and end calls, page 13.

J * / Keypad lock

Press and hold to lock the keypad, page 16. To unlock, press any key and fo llow the on screen instructions.

K Intercom

Used to make internal calls and transfer calls to other C6 handsets registered to the base, page 14.

L Recall / Power on/off

Use with switchboard/PABX services and some network services.

Press and hold to switch the handset on/off, page 13.

Handset LCD Display

Eco mode

Circle around appears when Eco mode is ON

Time or Handset name

In standby mode, press and hold

handset idle screen between handset name or time.

10 Getting to know your phone

Battery status

Scrolls when charging

0 to switch

Display icons

Flashes to indicate an incoming external call

External call in progress

Flashes to indicate an incoming internal call

Internal call in progress

3-way call in progress or transfer an external call to another C6 handset registered to the base

Eco mode is ON

Flashes to indicate new voicemail messages received

Off when you have no voicemail messages

Indicates signal strength Flashes when handset is not registered to the base or if you go out of range

Hands-free mode is ON

Menu is opened

Phonebook is opened

Flashes to indicate new calls list entries received*

Answered call (when viewing the Calls list)*

Unanswered call (when viewing the Calls list)*

Keypad is locked

Displayed number is longer than 12 digits

The approximate power levels of your battery are indicated as follows:

Battery is fully charged

Battery is partially charged

Battery is running low Flashes when battery is almost fully discharged

* For this feature to work, you must subscribe to Caller ID Service from your network operator. A subscription fee may be payable.

Overview of the base

Getting to know your phone 11

APaging Key

In standby mode, press to ring the handset(s), page 16. Press and hold to enter registration mode when registering handsets, page 28.

Navigating the menus

Your C6 has an easy to use menu system.

Each menu has a list of options, which you can see on the menu map on the following page.

When the handset is switched on and in standby:

Press m to open the main menu.

Then use u or d buttons to scroll through the available options.

Press m to select an option. To return to the previous menu level, press To exit the menu and return to standby, press and hold

NOTE

If no buttons are pressed for 30 seconds, the handset returns to standby automatically.

Menu map

PHONEBOOK SETUP HANDSET DATE - TIME REGISTER

ADD ENTRY

MODIFY ENTRY

DELETE ENTRY

12 Getting to know your phone

BASE VOLUME

BASE MELODY

DEL HANDSET

PIN CODE

DIAL MODE

RECALL

DEFAULT

ECO MODE

BEEP

INT RING VOL

EXT RING VOL

INT MELODY

EXT MELODY

AUTO ANSWER

NAME

LANGUAGE

KEYLOCK ?

DATE SET

CLOCK SET

ALARM SET

SELECT BASE

REG BASE

+ 26 hidden pages