Mota GIGA-6000 User Manual

QUICKSTART INSTRUCTIONAL GUIDE

1

Attach landing gear using the
provided screws.

4

Screw on the camera mount to the
drone using the 2 small screws.

2 3

Before installing landing gear
please remove the metal
antenna with the gold end.

Install the provided memory card, now
attach the HD camera to the drone.

Please note the landing gear with the Velcro
straps is for the side with the antennas, please
use this to strap down the loose antennas.

65

Install the rotors. Please make sure that the
correct rotors go on to the motors. Please make
sure the direction of the arrows matches.

7 8

Attach the monitor to the remote control.

Connect the battery in the back of
the monitor.

9

Power on the monitor.

QUICKSTART INSTRUCTIONAL GUIDE

10

Please note that your monitor and
wireless antenna are at the same
frequency.

13 14 15

Power on the HD camera and connect the
micro USB to the camera turn on “TV out”

11 12

Connect the Micro USB Cable to
the HD Camera

You will see the camera display on
the monitor.

Connect the battery to the drone.

Enjoy and fly safely.

QUESTIONS?

MOTA.COM/SUPPORT

Copyright (©) 2016 Mota Group, Inc. All rights reserved.