MOTA Battery Case for iPhone5-5s User Manual

Built-in Li-polymer battery with 2000 mAh capacity nearly

doubles the battery life time of your iPhone 5.

Protective IC Circuit efficiently prevents short-circuits,

over-charges, and malfunctions.

Tip:

To charge both your MOTA Battery Case and your iPhone 5,

and sync with iTunes (optional), insert your iPhone 5 into the

battery case and connect to computer using the provided

charging cable.

Connect the provided Micro USB charging cable to any USB

power source such as a computer to beging charging.

Charge the battery case until battery lights at the bottom of the

case indicate full.

Press and hold the on/off button on the MOTA Battery Case for

3 seconds to charge your iPhone.

Turning the battery case off when iPhone is fully charged will

significantly save the charging capacity. Press ON/OFF (hold for 3

seconds) to power off the battery case.

Be cautious of excessive drops, abrasions, or other impacts to

the power pack. Please stop using immediately if any abnormal

events occur.

It is recommended to use the included USB Cable to charge the

power pack, other cable may result in compatibility issues.

It is normal for the power pack to become warm when charging

due to high output.

Do not connect the power pack to iPhone if it has not been

used or charged for a long time.

iPhone® is a registered trademark of Apple® Inc.

Mota® is not affiliated to Apple® Inc.

MOTA® is a trademark of UNorth® LLC.

Copyright © 2013 by UNorth, LLC. All Rights Reserved.

www.MOTA.com