Moog PRIZM 201000, PRIZM 201000-001, PRIZM 201030, PRIZM 201000-002, PRIZM 201030-001 User Manual

Moog Components Group Prizm Fiber Optic USB 1.1 Link Manual February 17, 2009

Prizm Fiber Optic USB 1.1 Link

201000-xxx and 201030-xxx

Users’ Manual

And

Troubleshooting Guide

E-Mail: [e-mail] URL: www.moog.com/components

24/7 Technical Customer Support Hotline: [phone]

Page 1 of 9

(Rev. C)

February 17, 2009

Moog Components Group

Springfield Operations

750 West Sproul Road

Springfield, PA 19064

Tel: [phone] Fax [phone]

Moog Components Group Prizm Fiber Optic USB 1.1 Link Manual February 17, 2009

1 Prizm Fiber Optic USB 1.1 Link (P/N – 201000-xxx and 201030-xxx) Overview ......................................................... 3

1.1 Manual Revision History: ........................................................................................................................ 3

1.2 Prizm Fiber Optic USB 1.1 Link Revision History: .................................................................................. 3

1.3 Prizm Fiber Optic USB 1.1 Link Dash (-) Number Definitions: ............................................................. 4

1.4 Prizm Fiber Optic USB 1.1 Link Specifications: ..................................................................................... 4

1.5 Operation ................................................................................................................................................. 5

1.5.1 Prizm Fiber Optic USB 1.1 Link Indicators, Controls and Connectors: ..........................................................5

1.5.2 Prizm Fiber Optic USB 1.1 Link LED Behavior During Operation................................................................. 5

1.6 Prizm Fiber Optic USB 1.1 Link Adjustment and Troubleshooting ........................................................ 6

1.6.1 POWER SECTION TESTING: ....................................................................................................................... 6

1.6.2 OPTICAL SECTION TESTING:.....................................................................................................................7

1.6.3 DATA SECTION TESTING: ..........................................................................................................................7

2 Appendix A: Optical Considerations ...............................................................................................................................8

2.1 Prizm Fiber Optic USB 1.1 Link Singlemode, Single Fiber Operation ................................................... 8

3 Appendix B. Prizm Fiber Optic USB 1.1 Link Installation and Checkout....................................................................... 9

3.1 General Prizm Fiber Optic USB 1.1 Link Installation Notes................................................................... 9

3.2 Prizm Fiber Optic USB 1.1 Link Installation Checkout Procedure ......................................................... 9

3.3 Prizm Fiber Optic USB 1.1 Link System Installation Checkout Procedure............................................. 9

Page 2 of 9

Moog Components Group Prizm Fiber Optic USB 1.1 Link Manual February 17, 2009

1 Prizm Fiber Optic USB 1.1 Link (P/N – 201000-xxx and 201030-

xxx) Overview

The Prizm Fiber Optic USB 1.1 Link provides a transparent USB 1.1 link over single mode fiber at
distances up to 10 kilometers. The Link consists of two boards, a Local Host and a Remote Hub. Both
boards may be mounted on 3U VME plates and powered from a VME backplane, or alternatively they
may be independently powered via a 2-pin connector.

The Local Host board connects to a standard USB 1.1 Host via an industry standard USB cable. A
single mode fiber optic transceiver on the board provides an SC connection to the Remote Hub end of the
USB Link.

The Remote Hub board carries four USB 1.1 peripheral ports that may be used to interface to various
USB 1.1 peripherals. A second, local USB hub may also be plugged into any of the four provided ports
to allow for additional connectivity. A single mode fiber optic transceiver on the board provides an SC
connection to the Local Host end of the Link.

The Link consists of two PC-104 based cards, (3.55” wide, 3.775” long, .8” high), which have
standard PC-104 mounting holes. Both cards can provide pass through of all PC-104 backplane signals
and may be used in PC-104 based systems or they may be mounted separately and supplied with power
through a 2-pin terminal connector.

1.1 Manual Revision History:

The manual has gone through the following revisions:

Rev A Describes Original Production Units
Rev B Updated board dash numbers
Rev C Updated contact information to reflect Moog Components Group.

1.2 Prizm Fiber Optic USB 1.1 Link Revision History:

The Prizm Fiber Optic USB 1.1 Link (201000-xxx and 201030-xxx) has gone through the following
printed circuit board (PCB) and Assembly revisions:

PCB Revision A/Assembly Revision A Original Boards

Page 3 of 9