Moog BMT10C Specsheet

HOUSING

CAMERA ENCLOSURES_

ENCLOSURES_

Tough enough to stop a .44- Magnum bullet!

BMT10C / 2 / 3

Bullet-Resistant Housing

The BMT10 unit by Moog is a bullet-resistant environmental camera housing featuring a 7-gauge steel body and is designed to meet or exceed Level III protection per UL standard 752. An integrated tilt bracket protects all wiring and allows for surface mount applications, plus an innovative camera sled allows the camera to be rotated 360° within the housing to allow for any mount position.

Available Features

•

Accepts many lens and camera combinations up to 10”

•

SP-1250 Lexgard® viewing window, with a Window

™

Guard

paint shield

•

Rotating camera sled allows the housing to be mounted at any angle

•

Constructed from 7-gauge steel for strength and durability

•

Durable, heat reective, white powder-coat nish

•

Thermostatically controlled heater standard

•

Integrated tilt bracket to protect wiring

•

Designed to meet IP65 standards

•

Optional sunshield

• US Patent No. 6,375,369 B1

BMT10C

10.00

254

2.50 64

3.00 76

10.00

254

1.12

4.52

5.10

4.31

13.74

2.24

4.50

5.10

2.62Ø

6.00

BMT10C

Outdoor Camera Housings:

BMT10C

Steel Bullet-Resistant Outdoor housing with Window Guard 115Vac heater / thermostat (Level III).

Tough enough to stop a .44 Magnum bullet

™

paint shield, plus

BMT10C2

Steel Bullet-Resistant Outdoor housing with Window Guard 24Vac heater / thermostat. Tough enough

to stop a .44 Magnum bullet

™

paint shield, plus

BMT10C3

Steel Bullet-Resistant Outdoor housing with Window Guard 220/240Vac heater / thermostat. Tough

enough to stop a .44 Magnum bullet

™

paint shield, plus

Accessories:

WMBMT

Ballistic wall mount for BMT10

VLAY10

Aluminum sunshield for BMT10

BMTWG

Replacement Window Guard

™

paint shield (5 pack)

Window Guard Paint Shield™:

Our exclusive Window Guard™ paint shield protects housing windows from vandals using spray paint or paint ball guns.

Electrical Specications

Power Source

Size (h*w*d): BMT10C:

BMT10C2: BMT10C3:

The ballistic-rated environmental housing shall be constructed from 4.50” diameter steel tubing with a .23” thick wall, and shall include a thermostatically controlled heater. Front end plate shall be made from 7-gauge steel. The viewing window shall be constructed from SP-1250 Lexgard®, 1.25” bullet-resistant plastic with a vandal resistant guard, and shall be bolted to the front end plate. The internal camera bracket, which will rotate 360° inside the housing, shall allow the housing body to be mounted on any angled surface. The enclosure shall have an integrated tilt bracket that protects wiring and also allows for surface mount applications. An optional .090” thick aluminum sunshield will be available. Both the housing and sunshield shall have a heat- reective, white powder coat nish

6.74” x 4.52” x 13.74” 120 Vac, 50/60Hz, 28 VA 24 Vac, 50/60Hz, 28 VA 230 Vac, 50/60Hz, 28 VA

Maximum Camera Length (MCL) Architectural Drawings

Dimensions are in inches (mm)

LISTED

©2013 Moog, Inc. All rights reserved. Product and company names listed are trademarks or trade names of their respective companies. Specifications are subject to change, to confirm current call +1 847.498.0700.

CUL UL

*Some cameras outside of the shown dimensions may be compatible with this housing. Contact Moog for assistance.

Regulatory and Certications

+1.847.498.0700 Fax: +1.847.498.1258 www.moogS3.com

2.50Ø

(64)

Dimensions are in inches (mm)

Sensor and Surveillance Systems

3650 Woodhead Drive Northbrook, IL. USA 60062

(348)

(114)

6.75

(171)

.20

(5)

(28)

(114)

1.19

(30)

(57)

(22)

.88

4.31

(109) (130)

(67)

(152)

Form 500-916 110413