Moog ACH13W Specsheet
Aluminum Camera Housing
ACH13
Shown with optional
KFL13 deterrent light kit
15.25"
2.6"
2
U
LISTED
L
®
c
DESCRIPTION
The ACH13 is an outdoor, environmental housing that can
accommodate camera/lens combinations up to 10.5" long and 3.6"
wide. The body is an attractive white finish, accented with black end
caps. Options include heater/blower, sunshield and red flashing light
kit.
FEATURES
• Side hinge for easy access when servicing
• Accepts many lens and camera combinations
• Designed to meet IP65 standards
Outdoor Camera Housings
• Options include 24 VAC heater/blower, sunshield and red flashing
light kit
• Optional DECO1 polycarbonate wall mount isolates camera from
electrical ground
ARCHITECTURAL/ENGINEERING
SPECIFICATIONS
The ACH13 environmental housing shall be constructed from two
extruded aluminum (.08" wall thickness, white finish) halves and two
injection-molded polycarbonate end caps. A clear polycarbonate
viewing window shall be ultrasonically welded to the inside of the front
end cap, creating a watertight seal. The rear end cap shall have
molded standoffs on the inside surface for easy mounting of the
optional blower. The top of the housing shall be hinged from the side
to allow accessibility to the camera by one screw in each end cap.
Access to the camera for adjustment or removal shall be provided via
one screw located in the key hole slot on the aluminum camera sled.
An optional 25 vA heater may be mounted to the inside of the bottom
extrusion, directly behind the viewing window, for defogging and
deicing. Four vent plugs (2 in front, 2 in rear) will create a positive air
flow (front to rear) when the blower is in use. Two watertight strain
relief plugs will be located at the rear of the housing for separate coax
and power cable entry. Optional extruded aluminum sunshield and a
red flashing light kit shall also be available as separate boxed items.
MODELS
ACH13 - Aluminum camera housing with clear window and hinged
opening
ACH13W - ACH13 with DECO1 wall mount
ACH13H - ACH13 with 24 VAC heater/thermostat
ACH13HW - ACH13H with DECO1 wall mount
24-hour technical assistance
1-800-554-1124
2525 Park Central Blvd.
36
Decatur, GA 30035
Phone: (770) 987-7550
1-800-554-1124
U.S. & Canada only
5.5"
.845"
2.4"
4.33"
.5"
13.37"
2"
12.37"
5.93"
1"
2.68"
MODELS (continued)
ACH13HW3 - ACH13H3 with DECO1 wall mount
ACH13HB - ACH13 with 24 VAC heater/blower
ACH13HBW - ACH13HB with DECO1 wall mount
ACH13HB3 - ACH13 with 220 VAC heater/blower
ACH13HBW3 - ACH13HB3 with DECO1 wall mount
ELECTRICAL SPECIFICATIONS
Power Source
ACH13HB - 24 VAC, 50/60 Hz
Heater - 24 VAC, 25 vA, 1.04 Amps
Blower - 24 VAC, input (RECTIFIED), 1.4 vA
Power Source
ACH13HB3 - 220 VAC, 50/60 Hz
Heater - 220 VAC, 25 vA, .12 Amp
Blower - 220 VAC, 1.6 vA
OPTIONS/ACCESSORIES
AC10 - Tamper-resistant screw set
ACH2 - 24 VAC heater/thermostat kit
ACH3 - 220 VAC heater/thermostat
ACB2 - 24 VAC blower/thermostat kit
ACB3 - 220 VAC blower/thermostat kit
ACHY - Sunshield for ACH13 models
DECO1 - Polycarbonate wall mount
WM800 -Wall Mount bracket
CM1200 - Corner Mount bracket
CA1200 - Ceiling Mount bracket
KFL13 - Flashing Light kit
PolEvator™ - Lowering pole
Model Unit Shipping Shipping
Weight Weight Box Dim.
ACH13 4 lbs (1.9 kg) 4 Grd/4 Air 17 x 5 x 6
ACH13HB 5 lbs (2.3 kg) 5 Grd/5 Air 17 x 5 x 6
* Shipping weights depend on box dimensions.
Model Max Camera Length
ACH13 10.5" (26.7 cm)
Spec# Rev. Date Catalog Section VidFax #
6048 0800 2 S48
Due to our continued efforts to advance technology, product specifications
are subject to change without notice.
Fax: (770) 987-9705
1-800-826-0366
VidFax: 1-800-547-5044
Email: info@videolarm.com
www.videolarm.com
Loading...