Moog ACEM20CT Specsheet
HOUSING
ENCLOSURES_
AMS90
CORNER HOUSING
AMS180
WALL HOUSING
INDOOR HOUSING
WEDGE HOUSING
ACEM20C
ACE20
Vandal-Resistant Indoor Housings
ACE20, ACEM20, AMS90, AMS180
Moog Videolarm offers an array of indoor vandal-resistant housings. No matter what the application Moog Videolarm has the solution for
any surface be it wall or ceiling. Designed to house a solid-state camera unit in a compact casing these discrete housings are ideal for
environments were a higher level of security is needed.
CERTIFIED
Key Features
•
Easy-to-replace Window Guard™ paint shield allows vandalized viewing window to be quickly and economically restored to clarity
ACE20
•
Easy installation to any type of ceiling
•
Fully adjustable camera bracket for top or
bottom mounting
•
Right-angle BNC connector included for
longer length cameras
•
ACEM20
•
Easy installation to any type of ceiling
•
Optional 24VAC heater/thermostat for
protected outdoor applications and for
defogging the window
AMS90/AMS180
•
Mounting hardware fully contained within unit
to guard against tampering
•
•
•
Can be mounted with top against ceiling,
while still permitting hinged lid to open for
full access to the unit
•
Rugged, 14-guage cold-rolled steel
construction with welded seams
•
• •
• • • •
VANDAL-RESISTANT HOUSINGS_
RUGGED, VANDAL-RESISTANT HOUSINGS:
ACE20
Indoor Surface Mount Wedge: An off-white
polycarbonate ceiling wedge housing with clear
viewing window
ACE20T
Indoor Surface Mount Wedge: An off-white
polycarbonate ceiling wedge housing with tinted
viewing window
ACEM20C
Indoor Steel, Surface Mount: An off-white
powder coat 14-gauge steel ceiling wedge
housing with clear 3/16” polycarbonate
window with Window Guard™ paint shield
ACEM20CTH
Outdoor Steel Surface Mount:
ACEM20C with 24VAC heater/thermostat
© 2009-2010, Moog Videolarm, Inc. All Rights Reserved
Product and company names listed are trademarks or trade names of their respective companies.
AMS90CT
Indoor Corner Mount: An off-white
powder coated vandal resistant
construction; 14-gauge steel housing for
corner mount with barrel/cam lock, clear
.22” thick Lexan
®
viewing window, and
Window Guard™ paint shields. Includes
an adjustable bracket for xed camera.
MCL 8” (Maximum Camera Length)
AMS180CT
Wall Mount: An off-white powder coated
vandal resistant construction; 14-gauge
steel housing for wall mount with
barrel/cam lock, clear .22” thick Lexan
viewing window, and Window Guard™
paint shields. Includes an adjustable
bracket for xed camera. MCL 8”
®
SPECIFICATIONS:
ACE20
ACE20T:
ACEM20C
ACEM20CTH:
AMS90CT
AMS180CT:
CAMERA SIZE SPECIFICATIONS (ACE20/ACE20T)
NOTE:
JVC
Panasonic
Philips
Sanyo
Sony
Toshiba
NOTE:
Electrical Specications (ACEM20C)
Power Source:
Heater:
500 -701 + 07-06-2010
The body of the ACE20 housing is constructed from high-impact off-white polycarbonate, and contains a clear polycarbonate viewing window. The base plate is polycarbonate, and contains three
conduit knockouts on the bottom section for control and video cable. The housing cover has been attached to the base plate, and secured with two tamper-resistant fasteners.
The body of the housing is constructed of 14-gauge steel, off-white powder coat, and contain a clear 3/16” polycarbonate window. An easy-to-replace Window Guard™ paint shield allows clarity of
viewing window to be quickly and economically restored in case of vandalism. The base plate is a 18-gauge steel, and contains three conduit knockouts on the bottom section and a 7/8” hole on the
rear of the base plate for control and video cable. The housing cover is secured to the base plate with four stainless steel 8 x 32 security screws. An optional 24VAC heater/thermostat is available for
protected outdoor applications and for defogging the window.
The maximum security AMS180 and AMS90 measures 8.25”h X 5.5”w X 8.5”d. It’s constructed of 14-gauge, cold-rolled steel and nished in an off-white powder coat. A 2”w X 3”h opening for
viewing is covered by a .22” thick, clear, high-impact Lexan® viewing window with no light reduction. An easy-to-replace Window Guard™ paint shield that allows clarity of viewing window to be
quickly and economically restored in case of vandalism. The hinged lid can open fully, even when unit is mounted with top in contact with ceiling. The unit comes with an adjustable camera bracket
and barrel/cam lock. An optional 24VAC heater allows the unit to be used in protected outdoor applications.
Camera/lens combinations are based on
various cameras tted with a 4mm xed lens
(Computar TG0412FCS-3) with a lens length of
1 1/4” and a 3.5-8mm varifocal lens Computar
TG223514FCS-2) with a lens length of 1 3/4”.
(TK-S241V) with 4mm xed and 3.5-8mm varifocal lens
(WV-BP134, WV-CP234, WV-CP454) Color CCTV with
4mm xed and 3.5-8mm varifocal lens
LTC (0350/21) with 4mm xed and 3.5-8mm varifocal lens
(VCC-4324) Day/Night Color CCD with 4mm xed
and 3.5-8mm varifocal lens
(SPT-M124 Black & White) with 4mm xed and 3.5-8mm
varifocal lens (SSC-C104 Color) with 4mm xed
CCD (IK-527A) with 4mm fixed lens & 3.5-8mm varifocal lens
Other cameras that meet these length requirements
may also be used.
24VAC, 50/60 Hz
24VAC, 25vA, 1.04 Amps
Engineering Specications
Architectural Drawings (AMS90)
4.5”
Dimensions are in inches
5.75”
3.5”
5.5”
10.25”
Dimensions are in inches
(AMS90)
8.25”
2.0”
(AMS180)(ACEM20C)
5.5”
8.25”
Dimensions are in inchesDimensions are in inches
2.0”
4.67”
5.44”
3.38”
1.56”
10.79”
9.15”
70
1.3”
20
8.37”
Moog Videolarm, 2525 Park Central Boulevard, Decatur, GA 30035 USA + 1.800.554.1124 www.videolarm.com
8.5”
3.0”
8.5”
3.0”
Loading...