Moog ACE20C Specsheet
HOUSING
CAMERA
ENCLOSURES_
ENCLOSURES_
AMS90
CORNER HOUSING
AMS180
WALL HOUSING
ACEM20C
INDOOR HOUSING
ACE20
WEDGE HOUSING
Vandal Resistant
Indoor Housings
ACE20, ACEM20, AMS90, AMS180
Moog offers an array of indoor vandal resistant housings. No matter what the application Moog has the solution for any surface be it
wall or ceiling. Designed to house a solid-state camera unit in a compact casing these discrete housings are ideal for environments
were a higher level of security is needed.
Features
•
Easy-to-replace Window Guard™ paint shield allows vandalized viewing window to be quickly and economically restored to clarity
ACE20
•
Easy installation to any type of ceiling
•
Fully adjustable camera bracket for top
or bottom mounting
•
Right-angle BNC connector included for
longer length cameras
ACEM20
•
Easy installation to any type of ceiling
•
Optional 24Vac heater / thermostat for
protected outdoor applications and for
defogging the window
AMS90 / AMS180
•
Mounting hardware fully contained within
unit to guard against tampering
•
Can be mounted with top against ceiling,
while still permitting hinged lid to open for
full access to the unit
•
Rugged, 14-guage cold-rolled steel
construction with welded seams
Vandal Resistant Housings
4.5”
5.75”
3.5”
10.25”
5.5”
2.0”
8.25”
3.0”
8.5”
5.5”
8.25”
2.0”
8.5”
3.0”
3.38”
4.67”
5.44”
10.79”
9.15”
1.56”
8.37”
1.3”
70
20
Vandal Resistant Housings
Rugged, Vandal Resistant Housings:
ACE20
Indoor Surface Mount Wedge: An off-white
polycarbonate ceiling wedge housing with clear
viewing window
ACE20T
Indoor Surface Mount Wedge: An off-white
polycarbonate ceiling wedge housing with tinted
viewing window
ACEM20C
Indoor Steel, Surface Mount: An off-white powder
coat 14-gauge steel ceiling wedge housing with
clear 3/16” polycarbonate window with Window
™
Guard
paint shield
ACEM20CTH
Outdoor Steel, Surface Mount: ACEM20C with
24Vac heater / thermostat
AMS90CT
Indoor Corner Mount: An off-white powder coated
vandal resistant construction; 14-gauge steel
housing for corner mount with barrel / cam
lock, clear .22” thick Lexan
and Window Guard
includes an adjustable bracket for xed camera.
MCL 8” (Maximum Camera Length)
AMS180CT
Wall Mount: An off-white powdercoated vandal
resistant construction; 14-gauge steel housing
for wall mount with barrel / cam lock, clear
.22” thick Lexan
Guard
bracket for xed camera. MCL 8”
®
™
®
™
paint shields. The housing includes
viewing window, and Window
viewing window,
paint shields. The housing
ACE20 / ACE20T:
ACEM20C / ACEM20CTH:
AMS90CT / AMS180CT:
Power Source:
Heater:
(ACE20)
Engineering Specications
The body of the ACE20 housing is constructed from high-impact off-white polycarbonate, and contains a
clear polycarbonate viewing window. The base plate is polycarbonate, and contains three conduit knockouts
on the bottom section for control and video cable. The housing cover has been attached to the base plate, and
secured with two tamper-resistant fasteners.
The body of the housing is constructed of 14-gauge steel, off-white powder coat, and contain a clear 3/16”
polycarbonate window. An easy-to-replace Window Guard
be quickly and economically restored in case of vandalism. The base plate is a 18-gauge steel, and contains
three conduit knockouts on the bottom section and a 7/8” hole on the rear of the base plate for control and
video cable. The housing cover is secured to the base plate with four stainless steel 8 x 32 security screws. An
optional 24Vac heater / thermostat is available for protected outdoor applications and for defogging the window.
The maximum security AMS180 and AMS90 measures (HxWxD) 8.25” x 5.5” x 8.5”. It’s constructed of 14-gauge,
cold-rolled steel and nished in an off-white powder coat. A (WxH) 2”x 3” opening for viewing is covered by a
.22” thick, clear, high-impact Lexan
paint shield that allows clarity of viewing window to be quickly and economically restored in case of vandalism.
The hinged lid can open fully, even when unit is mounted with top in contact with ceiling. The unit comes with an
adjustable camera bracket and barrel /cam lock. An optional 24Vac heater allows the unit to be used in protected
outdoor applications.
®
viewing window with no light reduction. An easy-to-replace Window Guard™
™
paint shield allows clarity of viewing window to
Electrical Specications (ACEM20C)
24Vac, 50/60 Hz
24Vac, 25vA, 1.04 Amps
(ACEM20C)
(AMS90)
Camera Size (ACE20 / ACE20T)
Camera / lens combinations are based on various cameras
tted with a 4mm xed lens (Computar TG0412FCS-3) with a
lens length of 1 ¼” and a 3.5-8mm varifocal lens (Computar
TG223514F- CS-2) with a lens length of 1 ¾”
JVC:
Panasonic:
Philips:
Sanyo:
Sony:
Toshiba:
Other cameras that meet these length requirements
may also be used
(TK-S241V) with 4mm xed
and 3.5-8mm varifocal lens
(WV-BP134, WV-CP234, WV-CP454)
Color CCTV with 4mm xed and
3.5-8mm varifocal lens
LTC (0350/21) with 4mm xed
and 3.5-8mm varifocal lens
(VCC-4324) Day / Night Color
CCD with 4mm xed and
3.5-8mm varifocal lens
(SPT-M124 Black & White) with 4mm
xed and 3.5-8mm varifocal lens
(SSC-C104 Color) with 4mm xed
CCD (IK-527A) with 4mm xed lens
and 3.5-8mm varifocal lens
(AMS180)
©2013 Moog, Inc. All rights reserved.
Product and company names listed are trademarks
or trade names of their respective companies.
Specifications are subject to change, to confirm current
call +1 847.498.0700.
Dimensions are in inches Dimensions are in inchesDimensions are in inches Dimensions are in inches
Sensor and Surveillance Systems
3650 Woodhead Drive Northbrook, IL. USA 60062
+1.847.498.0700 Fax: +1.847.498.1258 www.moogS 3.com
Form 500-XXX 110113
Loading...