Moog 907-HDM BROCHURE

Fiber Optic Multiplexers

907-HDM

High Denition Video Multiplexer

Description

The Model 907-HDM is a singlemode High Denition (HD) Video Multiplexer with on-board serial data and (optional) USB channels. The HD-SDI video stream is coupled with serial channels available for pan, tilt, or zoom/lens control of the HD camera. The on-board USB option is available for extracting high quality still images from HD cameras with this feature. A wide range of expansion cards are available in a variety of formats, including RS-232/485/422, TTL, Ethernet, CANBus, analogue sonar, hydrophone, audio, and Tritech ARCNET. The 907-HDM may be used as a standalone card or optically integrated into a 907 system stack via CWDM modules.

Optical power budgets are typically 20 - 26 dB over 10 km of singlemode ber. Enhanced diagnostics are provided by on-board LEDs and through a dedicated Ethernet link when used with our diagnostics card (907-DIAG-E) and corresponding graphical user interface (GUI) software.

Features

• Optional USB daughter card

• Wavelength selectable/interchangeable SFP transceivers

• Rugged design for marine environment

• Diagnostics embedded in optical link for remote access

Typical Applications

• Remotely Operated Vehicles (ROVs) and Tether Management Systems

• Pipe Inspection Robots

• Bomb Disposal Robots

• Video Security Systems

• Tactical Networks and Defense Systems

• Industrial Process Control

Benets

• Provides HD camera control and video feed with a reliable small form-factor card

• Supports a wide range of optical options, including CWDM wavelengths for combining multiple cards on a single optical ber

• Simplies troubleshooting with remote diagnostics and GUI

Moog Components Group, Halifax Operations

77 Frazee Avenue, Dartmouth, Nova Scotia, Canada B3B 1Z4

www.moog.com/marine • email: mcg@moog.com

• 888-302-2263 • +1-902-468-2263 • Fax +1-902-468-2249

Fiber Optic Multiplexers

Video

No. of Channels 1

Format HD-SDI (SMPTE-292M)

Data Rate 1483 or 1485 Mbps

Input Buffer Adaptive cable EQ

Output Voltage 800 mVpp nominal

Impedance 75 Ohms, input/output

Data

Serial Channels 2 x RS-232/485/422 120 kbaud

bidirectional, isolated (4 x RS-232 optional)

USB (Optional) Console has one port, remote has four

ports, USB 1.1 (12 Mbps)

Options Expansion cards for Ethernet, serial data,

Tritech ARCNET, MS-900, Hydrophone/ Analog, CANBUS and Ethernet Diagnostics

Optical

Optical Fiber 1 or 2 singlemode (9/125 um)

Baud Rate 3 Gbaud

Wavelengths 1310/1550 nm standard

(CWDM optional)

Flux Budget 20 dB min. standard (others available)

Options CWDM wavelengths for combining multiple

907 cards on one singlemode ber; bidirectional transceivers

Electrical

Power Supply +5 VDC +/-10%, regulated input required

Current Draw 1.2 A typical (2 A max.)

Power Used 6 W typical (10 W max.)

Voltage Protection Overvoltage and reverse polarity

Current Protection Time delay fuse

Mechanical

Dimensions PC/104 (form factor only)

Weight 125 g (0.27 lb), including SFP

Enclosures Contact Moog for custom enclosures

Stacking Spacers 0.625 inch standoffs (no USB), adapter card kit

(with USB). Contact Moog for stacking options.

Stacking Pins Short pins on PC/104 standard for all

wavelengths

Connectors

Optical Dual LC (SFP)

Video Mini SMB, 75 Ohm

Data (Serial) 2 x 6-pin Molex for serial data

Data (USB) 4 x type A remote/1 type B console

Power 1 x 2-pin Molex

Stacking Header PC/104 (for stacking 907 cards only)

Environmental

Temperature -10 to +60 °C (operational)

-20 to +85 °C (storage)

Humidity 85% relative, non-condensing

Shock 30 g, 11 ms, per ISO 13628-6 Q1 level

Vibration 5 g, 25 - 1000 Hz, per ISO 13628-6 Q1 level

907-HDM Dimensions

Dimensions in inches [mm]