Moog 907-GBES BROCHURE

Fiber Optic Multiplexers
907-GBES
Gigabit Ethernet Media Converter
Description
The 907-GBES may be used as a standalone card or optically integrated into a 907 system stack via CWDM modules. Optical power
budgets are typically 20 - 26 dB over 10 km of singlemode ber.
Enhanced diagnostics are provided by on-board LEDs and through a dedicated Ethernet link when used with diagnostics card (907-DIAG-E) and corresponding graphical user interface (GUI) software.
Features
• Ethernet switch with four 10/100/1000 Mbps RJ-45 copper ports and one 1.25 Gbaud optical port
• Wavelength selectable/interchangeable SFP transceivers
• Rugged design for marine environment, including 6000 psi
pressure tolerant version
• Diagnostics embedded in optical link for remote access
Typical Applications
• Remotely Operated Vehicles (ROVs)
and Tether Management Systems
• Pipe Inspection Robots
• Bomb Disposal Robots
• Video Security Systems
• Tactical Networks and
Defense Systems
• Industrial Process Control
Benets
• Provides multi-port Ethernet to optical conversion with a reliable
small form-factor card
• Congures RJ-45 ports automatically to link with connected
Ethernet device
• Supports a wide range of optical options, including CWDM
wavelengths/transceivers for combining multiple cards on
a single optical ber
• Optical and on-board remote diagnostics simplify troubleshooting
when used with the 907-DIAG-E
Moog Components Group, Halifax Operations
77 Frazee Avenue, Dartmouth, Nova Scotia, Canada B3B 1Z4
www.moog.com/marine • email: mcg@moog.com
• +1.888.302-2263 • +1.902.468.2263 • Fax +1.902.468.2249
Fiber Optic Multiplexers
Data
No. Copper Ports
Data Rates
Formats
Total Throughput
Latency (Remote + Console)
Options
Optical
Optical Fiber
Baud Rate
Format
Wavelengths
Flux Budget
Options
Electrical
Power Supply
Current Draw
Power Used
Voltage Protection
Current Protection
4 (switched)
10/100/1000 Mbps
10/100/1000 BaseT
~ 1000 Mbps (0.01% used for embedded diagnostics)
< 0.1 ms (single channel) < 10 ms (10 Mbps port, all ports active)
typical, per RFC 2544
Managed switch options for VLAN, port
mirroring, quality of service, etc. Contact Moog for details.
1 or 2 singlemode (9/125 um)
1.25 Gbaud
AME-EP (Moog proprietary)
1310/1550 nm standard (CWDM optional)
20 dB min. standard (others available)
CWDM wavelengths for combining multiple 907 cards on one singlemode
ber; bidirectional transceivers; extended temperature; 2.5 Gbaud optical link
+5 VDC +/-10%,
regulated input required
1.2 A typical (2 A max.), all ports active
6 W typical (10 W max.), all ports active
Overvoltage and reverse polarity
Time delay fuse (3 A)
Diagnostics
LEDs
Ethernet to PC
Mechanical
Dimensions
Weight
Enclosures
Stacking Spacers
Stacking Pins
Connectors
Optical
Data (Ethernet)
Power
Stacking Header
Environmental
Temperature
Humidity
Shock
Vibration
Options
Power (electrical), over temperature limit, optical link valid, PHY Rx/Tx activity, Ethernet port link speed
Available through 907-DIAG-E card
PC/104 (form factor only)
125 g (0.27 lb), including SFP
Contact Moog for custom enclosures
0.72 inch standoffs required when stacked
Short pins on PC/104 standard for all wavelengths
Dual LC (SFP)
4 x RJ-45
2-pin Molex, 0.156 inch pin spacing
PC/104 (for stacking 907 cards only)
-10 to +60 °C (ambient, operational)
-40 to +85 °C (ambient, storage)
85% RH, non-condensing
30 g, 11 ms, per ISO 13628-6 Q1 level
5 g, 25 - 1000 Hz, per ISO 13628-6 Q1 level
6000 psi pressure tolerant version; extended temperature; stress screened or qualied
units
907 GBES Dimensions
Dimensions in inches [mm]
Specications and information are subject to change without prior notice. Please refer to the website for the latest information / updates.
© 2010 Moog Inc. MS3033 3/10
Loading...