Moog 907-GBE2 BROCHURE

Fiber Optic Multiplexers
907-GBE2
Dual Gigabit Ethernet Media Converter
Description
head” congurations, or any application that requires simultaneous yet dedicated point-to-point “switchless” connections over ber. The 907-GBE2 may be used as a standalone card or optically integrated into a 907 system stack via CWDM modules. Optical power budgets are typically 20 - 26 dB over 10 km of singlemode ber. Enhanced diagnostics are provided by on-board LEDs and through a dedicated Ethernet link when used with the diagnostics card (907-DIAG-E) and corresponding graphical user interface (GUI) software.
Features
• Two independent (switchless) 1000 Mbps Ethernet links
• Single optical transceiver running with 2500, 1250 or 625 Mbaud optical link (switch settable)
• Wavelength selectable/interchangeable SFP transceivers
• Rugged design for marine environment, including 6000 psi
pressure tolerant version
• Diagnostics embedded in optical link for remote access
Typical Applications
• Remotely Operated Vehicles (ROVs) and Tether Management Systems
• Pipe Inspection Robots
• Bomb Disposal Robots
• Video Security Systems
• Tactical Networks and Defense Systems
• Industrial Process Control
Benets
• Reduces cost and size by replacing two GbE media converters
with a single card and single optical transceiver
• Switchless design provides low latency and compatibility with non-standard packets often used by sonars and other proprietary data link
• Supports operation over multimode ber with lower optical rate
settings
• Supports a wide range of optical options, including CWDM wavelengths for combining multiple cards on a single optical ber
• Simplies troubleshooting with remote diagnostics and GUI
Moog Components Group, Halifax Operations
77 Frazee Avenue, Dartmouth, Nova Scotia, Canada B3B 1Z4
www.moog.com/marine • email: mcg@moog.com
• +1.888.302-2263 • +1.902.468.2263 • Fax +1.902.468.2249
Fiber Optic Multiplexers
Data
No. Copper Ports
Data Rates
Formats
Total Throughput
Latency (Remote + Console)
Options
Optical
Optical Fiber
Baud Rate
Format
Wavelengths
Flux Budget
Options
Electrical
Power Supply
Current Draw
Power Used
Voltage Protection
Current Protection
2 (non-switched, independent)
1000 Mbps only
1000Base-T
~ 500/1000/2000 Mbps, via switch setting (0.01% used for embedded diagnostics)
< 25 us (not including ber)
Standalone version; support for jumbo
frames. Contact Moog for details.
1 or 2 singlemode (9/125 um)
625, 1250 or 2500 Mbaud
AME-EP (Moog proprietary)
1310/1550 nm standard (CWDM optional)
20 dB min. standard (others available)
CWDM wavelengths for combining
multiple 907 cards on one singlemode
ber; bidirectional transceivers; extended temperature; multimode ber
+5 VDC +/-10%, regulated input required
1 A typical (1.5 A max.), all ports active
5 W typical (7.5 W max.), all ports active
Overvoltage and reverse polarity
Time delay fuse (3 A)
Diagnostics
LEDs
Ethernet to PC
Mechanical
Dimensions
Weight
Enclosures
Stacking Spacers
Stacking Pins
Connectors
Optical
Data (Ethernet)
Power
Stacking Header
Environmental
Temperature
Humidity
Shock
Vibration
Options
Power (electrical), optical link, optical fault, optical speed, PHY Rx/Tx activity, port rate
Available through 907-DIAG-E card
PC/104 (form factor only)
125 g (0.27 lb), including SFP
Contact Moog for custom enclosures
0.72 inch standoffs required when stacked
Short pins on PC/104 for standalone options Long pins on PC/104 for CWDM options
(standard)
Dual LC (SFP)
2 x RJ-45
2-pin Molex, 0.156 inch pin spacing
PC/104 (for stacking 907 cards only)
-10 to +60 °C (ambient, operational)
-40 to +85 °C (ambient, storage)
85% RH, non-condensing
30 g, 11 ms, per ISO 13628-6 Q1 level
5 g, 25 - 1000 Hz, per ISO 13628-6 Q1 level
6000 psi pressure tolerant version; extended temperature; stress screened or qualied
units
907 GBE2 Dimensions
Dimensions in inches [mm]
Specications and information are subject to change without prior notice. Please refer to the website for the latest information / updates. © 2010 Moog Inc. MS3035. 3/10
Loading...