Moffat E40AC User Manual

4517 BS ACSeries specs V3 24/6/05 10:52 AM Page 17

TECHNICAL SPECIFICATION SHEET FOR

BLUE SEAL ELECTRIC COMBI STEAMER

AC SERIES E40AC DD 40 x 1/1GN or 20 x 2/1

General features:

- Direct steam injection system

- Stainless steel construction

- Hygienic rounded corners in oven cavity

- Pivoting fan suction panel

- Front removable control panel for easy
servicing

- Hygienic plug-in door seal for easy to
remove day-to-day cleaning

- Adjustable door hinges

- Self draining door condensate drip tray

- Hand shower

- Oven lights

- Oven door handle with progressive brake
mechanism

- Cool to touch double glazed door

- Hinged inner glass for easy cleaning

- Constant self-diagnosis for error
recognition

- Includes trolley with front brake castors

Standard features:

- Electronic manual control panel with
cooking modes

- Electronic thermostat 30°C - 300°C

- Electronic timer

- Auto-reversing fan rotation

- Cavity fast cool down which automatically
stops at 50°C

- Automatic cavity cool down between high
temperature cycles and the next cycle
featuring a lower temperature

- Manual humidifier or programmable

- Manual vent to evacuate the excess humidity

- Automatic quenching of vapours into the
oven drain

- Cavity clean program

- Energy saving device for a reduced energy
consumption

Optional features:

- Interchangeable core probes with external
socket

- Marine and special voltages

- Connection for an external printer
(type RS232)

- Connection for energy saving system

Cooking programmes:

Steaming 30°C - 130°C

- For steaming, stewing and
poaching

Combination 30°C - 300°C

- For roasting and baking

Convection 30°C - 300°C

- For grilling, quick roasting,
baking, toasting and gratinating

Regeneration (Reheating)

- Pre-set Programs

R1 for reheating of plated meals

R2 for reheating of gastronorm
containers

RP reheating with manual setting
of time and temperature

Optional : Core probe 30°C - 130°C

4517 BS ACSeries specs V3 24/6/05 10:52 AM Page 18

TECHNICAL SPECIFICATION SHEET FOR

BLUE SEAL ELECTRIC COMBI STEAMER

AC SERIES E40AC DD 40 x 1/1GN or 20 x 2/1

Dimensions

Width 1290mm
Depth 895mm
Height 1950mm
Weight 395kg

Packed Dimensions

Width 1420mm
Depth 1220mm
Height 2250mm
Weight 505kg

Shelves

1/1 GN 40
2/1 GN 20
Shelf Spacings 67mm

Installation requirements

(for precise installation
instructions, please refer to the
unit’s installation manual).

Power connection requirements

Multi pole circuit breaker and all
pole disconnection isolator switch
installed near the appliance.

Supply line voltage;
400-415V ~ 50Hz, 3P+N+E

Special voltage options available
on request.

Power Connection

Total (kW) 61.8
Convection power (kW) 60
Rated Current (A) (400V) 90

IPX5 spray-proof and hose proof.

Installation clearances

- rear 25mm

- right 500mm*

- left 50mm

*Clearance required on fixed
installations for service
accessibility.

If heat sources are located near
the RH side of the AC combi,
ensure that a minimum distance
of 400mm is maintained.

Install in accordance with local
body regulations only on horizontal
surfaces and not against
combustible walls.

Water connection requirements

- Cold water

- Flow pressure (2 to 6 bar)

- soft water connection*

- shut-off valve with return flow
inhibitor and dirt filter

- water supply R3/4

- R50 waste water connection

(*Water softener may be required.
Please refer to installation manual
for water treatment values.)

Australia

www.moffat.com.au

New Zealand

www.moffat.co.nz

Australia
Moffat Pty Limited

Victoria/Tasmania

740 Springvale Road
Mulgrave, Victoria 3170
Telephone [phone]
Facsimile 03-9518 3833
[e-mail]

New South Wales

Telephone [phone]
[e-mail]

South Australia

Telephone [phone]
[e-mail]

Queensland

Telephone [phone]
[e-mail]

Western Australia

Telephone [phone]
[e-mail]

New Zealand
Moffat Limited

Christchurch

Telephone [phone]
[e-mail]

Auckland

Telephone [phone]
[e-mail]

Optional Extras

SC Core temperature probe

KST40 Extra roll-in trolley to suit 40AC DD

KPT40 Plate banqueting trolley to suit 40AC DD

CPT40 Thermal cover for plate banqueting system to suit 40AC DD

A = WATER CONNECTION R3/4

(SOFTENED WATER) refer to installation

manual for water treatment values.
B = WATER CONNECTION R
C = DRAIN CONNECTION Ø50
D = ELECTRICAL CONNECTION ENTRY
E = HIGH/LOW PRESSURE RELIEF VENT
F = OVEN VENT Ø80

3

/4

In line with policy to continually develop
and improve its products, Moffat Limited
reserves the right to change
specifications and design without notice.

Printed in China
© Copyright Moffat Ltd
Moffat/4517-E40/BH/3.5M/6.05