Moffat E33D5-2 User Manual

TECHNICAL DATA SHEET FOR

E33D5 DOUBLE STACKED

Half Size Digital / Electric Convection Ovens Double Stacked on a Stainless Steel Base Stand

E33D5/2 - Double stack with adjustable feet base stand E33D5/2C - Double stack with castor base stand

DOUBLE STACK FEATURES

• Two 5 half size sheet pan capacity ovens

• Compact 24” / 610mm width

• Full stainless steel base stand

• Full stainless steel oven spacer frame

• Adjustable feet or castor models

• Guard rail for bottom oven

STANDARD FEATURES

• 5 half size sheet pan capacity

• 5 12” x 20” hotel pan capacity

• 3

/3” / 85mm tray spacing

• Digital display Time and Temperature Controls

• Large easy view 20mm high displays

• Electronic thermostat control

• Electronic timer with countdown or time count modes

• Manual mode and Program mode

NEW

20 programs with 3 stage cooking and stage end alarms

NEW

Core Probe program cooking (optional Core Probe Kit)

• Moisture injection mode (5 levels) and manual injection

• 2 speed bi-directional reversing fan system

• 5.8kW heating power

• Safe-Touch vented side hinged door

• Slam shut door latch

• Pendulum operation door handle

• Porcelain enameled oven chamber

• Plug-in continuous oven door seal

• Dual halogen oven lamps

• Anti-skid 2” / 50mm dia. 3” / 76mm high adjustable stainless steel feet

• 100% recyclable packaging

E33D5/2

E33D5/2C

ACCESSORIES

• Optional M236060 Core Temperature Probe Kit

E33D5/2 E33D5/2C

Units shall be Moffat electrically heated Turbofan convection ovens E.T.L. listed and NSF-4 listed. The ovens shall have a one piece porcelain enameled oven chamber, stainless exterior top and sides. The ovens shall have a vented safe touch side hinged door with slam shut latching and pendulum operation door handle. Oven shall have capacity for 5 half size sheet pans or 5 12” x 20” steam pans. The ovens shall be controlled by an electronic control having separate digital displays and adjusting knobs for time and temperature functions. The ovens controls shall allow both manual and programmed (20 programs) operating modes with programmable moisture injection, 2 speed oven fan, and 3 stage cooking. A core temperature probe M236060 is optional. The ovens shall include dual halogen oven lamps. Ovens shall be double stacked using Double Stacking Kits DSK33 (adjustable feet option) or DSK33C (castor option). Units shall be supplied in 100% recyclable shipping packaging.

Double stack models are supplied as two individual ovens and a double stacking kit for ﬁeld assembly.

Model E33D5/2C shown

E33D5/2

610 mm / 24"

730 mm / 28

E33D5/2C

E33D5/2 E33D5/2C Half Size

Digital / Electric Convection Ovens Double Stacked on a Stainless Steel Base Stand

CONSTRUCTION - OVENS

Porcelain enameled fully welded oven chamber Stainless steel front, sides and top exterior Stainless steel oven fan bafﬂe and oven vent Removable 5 position stainless steel side racks Stainless steel frame side hinged door

0.2” / 5mm thick door outer glass

0.2” / 5mm thick low energy loss door inner glass Stainless steel control panel Aluminised coated steel base and rear panels

CONSTRUCTION - DOUBLE STACKING KIT

All stainless steel construction Welded 1½” / 38mm and 1¼” / 32mm square tube front and rear frame base stand 4 adjustable feet on E33T5/2 4 dia. 3” / 76mm swivel castors with 2 front castors dual wheel and swivel lock on E33T5/2C Stainless steel oven spacer frame Stainless steel bottom oven vent extension

CONTROLS (each oven) Electronic controls with Digital Time and Temperature display, Manual or Program modes Large ¾” / 20mm high LED displays Two individual time and temperature setting control knobs ON/OFF and Oven Lights key Fan LO speed key Timer Start / Stop key Moisture Injection key (5 moisture levels) Programs select key Actual temperature display key Adjustable buzzer / alarm volume Thermostat range 120-500°F Timer range from 180 minutes in countdown mode Timer range up to 999 minutes in time count mode for holding, slow cooking Optional Core Probe temperature range 122-194°F / 50-90°C Over-temperature safety cut-out

CLEANING Stainless steel top and side exterior panels Porcelain enameled oven chamber Fully removable stainless steel oven side racks Removable stainless steel oven fan bafﬂe Easy clean door system with hinge out door inner glass (no tools required) Removable plug-in oven door seal (no tools required)

SPECIFICATIONS Electrical Requirements (each oven)

208V, 60Hz, 1P+N+E, 5.8kW, 27.8A 220-240V, 60Hz, 1P+N+E, 6.0kW, 25A No cordset supplied

Water Requirements (optional - each oven)

Cold water connection ¾” BSP male 550kpa maximum inlet pressure / 150kpa minimum inlet pressure

External Dimensions

Width 24” / 610mm Height 67¾” / 1720mm Depth 28¾” / 730mm

Oven Internal Dimensions

Width 13” / 330mm Height 20¼” / 515mm Depth 22½” / 570mm Volume 3.53ft³ / 0.10m3

Oven Rack Dimensions

Width 13” / 330mm Depth 20

/8” / 530mm

Nett Weight (double stack complete)

344lbs / 156kg

Packing Data (E33D5 ovens each)

205lbs / 93kg Width 25¾” / 655mm Height 31¾” / 805mm Depth 32¾” / 830mm Volume 15.5ft³ / 0.44m3

Packing Data (Stacking Kit)

29lbs / 13kg (DSK33 - adjustable feet) 35lbs / 16kg (DSK33C - castor) Width 30¹/³” / 770mm Height 35” / 890mm Depth 6¾” / 170mm Volume 4.2ft³ 1.2m3

Supplied CKD for assembly on site

INSTALLATION CLEARANCES

Rear 2” / 50mm LH Side 2” / 50mm RH Side* 3” / 75mm * For ﬁxed installations a minimum of 20” / 500mm is required for service

CLEARANCE FROM SOURCES OF HEAT

A minimum distance of 12” / 300mm from the appliance sides is required

Double Stacking Kits

For after market double stacking two E33D5 convection ovens DSK33 - Double stacking kit - adjustable feet DSK33C - Double stacking kit - castor

www.moffat.com

U.S.A.

Moffat Inc

3765 Champion Boulevard

Winston-Salem

North Carolina 27105

Ph Toll Free 1-800-551 8795

Ph 336-661 0257

Fax 336-661 9546

Email sales@moffat.com

www.moffat.com

Manufactured by:

Moffat Limited

16 Osborne Street PO Box 10-001

Christchurch 8081 New Zealand

1720 mm / 67

1072 mm / 42

VENT

13 mm /

359 mm / 14

535 mm / 21"

1267 mm / 49

1093 mm / 43"

555 mm / 21

34 mm / 1

WATER CONNECTION

ELECTRICAL

ENTRY

WATER CONNECTION

ELECTRICAL

ENTRY

381 mm / 15"

" 565 mm / 22

328 mm / 12

29 mm / 1

457 mm / 18"

243 mm / 9

VENT

78 mm / 3

55 mm / 2

Model E33D5/2 shown Model E33D5/2C dimensions are the same

ISO9001

Designed and manufactured by

ISO9001 All Turbofan products are designed and manufactured by Moffat using the internationally recognised ISO9001 quality management system, covering design, manufacture and ﬁnal inspection, ensuring consistent high quality at all times.

In line with policy to continually develop and improve its products, Moffat Limited reserves the right to change speciﬁcations and design without notice.

Quality Management Standard