Moffat E32D5-P8M User Manual

E32D5 / P8M

TECHNICAL DATA SHEET FOR

E32D5 ON THE P8M Proofer/Holding Cabinet

Full Size Digital / Electric Convection Oven
8 Tray Manual / Electric Proofer/Holding Cabinet

STANDARD FEATURES

• Full size sheet pan capacity

• 5 tray Oven / 8 tray Proofer

• Compact 28

• Low unit height 61

• Side hinged doors (standard LH hinge)
Optional RH hinge (field convertible)

• Dual halogen lamps in Oven and Proofer

• Proofer with dual function Proof and Holding modes

OVEN

1

• 3

/3”/ 85mm tray spacing

• Electronic digital display Time and Temperature Controls

• Manual mode and Program mode
20 programs with 3 stage cooking and stage end alarms

NEW

Core Probe program cooking (optional Core Probe Kit)

NEW

Moisture injection mode (5 levels) and manual injection

NEW

2 speed bi-directional reversing fan system

NEW

• Safe-Touch vented door

• Porcelain enameled oven chamber

• Plug-in continuous oven door seal

• 5 oven wire racks supplied

• 100% recyclable packaging

PROOFER

• 3”/ 76mm tray spacing

• Auto water fill system with optional integrated water filter kit

• Continuous door seal

• Low velocity circulation fan system

• Mechanical thermostat and Humidity level control

• Cabinet temperature display thermometer

• 4 dia. 3” / 76mm castors with 2 front castors dual wheel
and swivel lock, 2 rigid rear castors

• 100% recyclable packaging

ACCESSORIES

• Optional M236060 Core Temperature Probe Kit

• Optional 3M Cuno water filter kit complete with
cartridge and connection fittings

• Installs in pre-fitted rear housing of cabinet for
flush rear installation

7

/8” / 735mm width

3

/8” / 1560mm

E32D5 Unit shall be a Moffat electrically heated Turbofan convection oven E.T.L. listed and NSF-4 listed. The oven shall have a one piece porcelain enameled oven

chamber, stainless top and sides and safe touch vented easy clean side hinged door that offers field reversible hinging. Oven shall have capacity for five full size sheet pans.
The oven shall be controlled by an electronic control having separate digital displays and adjusting knobs for time and temperature functions. The oven control shall allow both
manual and programmed operating modes with programmable moisture injection, 2 speed oven fan, and 3 stage cooking. A core temperature probe M236060 is optional.
The unit shall include dual halogen oven lamps. Unit shall be supplied in 100% recyclable shipping packaging.

P8M Unit shall be a Moffat electrically heated Turbofan Proofer and Holding Cabinet ETL Listed and NSF-4 listed. The proofer and holding cabinet shall have double skin

construction with stainless steel interior and exterior sides, front and top. Door shall be side hinged and field reversible. Unit shall have capacity for up to 16 half size sheet
pans or 8 full size sheet pans. A single speed fan shall gently and evenly circulate air around the cabinet. Cabinet shall be controlled by a mechanical thermostat and humidity
via a control of the water tank. A thermometer shall indicate the cabinet temperature. Proofer and holding cabinet shall be mounted on castors, with two rigid castors at
rear and two swivel castors dual swivel and wheel lock and front. Proofer and Holding Cabinets shall be fitted with NEMA 5-15P cordsets. Unit shall be supplied in 100%
recyclable shipping packaging.

735 mm /28

7

8

" 810mm/31

7

8

"

306mm/12"

VENT

65 mm /2

1

2

"

/1"
/4"

E32D5 / P8M

E32D5 Full Size Digital / Electric Convection Oven - 2 speed fan
P8M Full Size Manual / Electric Proofer/Holding Cabinet

CONSTRUCTION - Oven (E32D5)

Porcelain enameled fully welded oven chamber
Stainless steel front, sides and top exterior
Stainless steel frame side hinged door

0.2” / 5mm thick door inner and outer glass
Stainless steel control panel
Aluminized coated steel base and rear panels

CONSTRUCTION - Proofer (P8M)

304 stainless steel interior cabinet
Stainless steel front, sides and top exterior
Stainless steel interior side racks
Stainless steel frame side hinged door

0.2” / 5mm thick door glass
Stainless steel control panel
Aluminized coated steel base and rear panels

CONTROLS - Oven (E32D5)
Electronic controls with Digital Time and Temperature display,
Manual or Program modes
Large ¾” / 20mm high LED displays
Two individual time and temperature setting control knobs
ON/OFF and Oven Lights key
Fan LO speed key
Timer Start/Stop key
Moisture Injection key (5 levels)
Programs select key
Actual temperature display key
Adjustable buzzer/alarm volume
Thermostat range 150-500°F / 50-260°C
Timer range from 180 minute in countdown mode /
999 minute in count-up mode
Optional Core Probe temperature range 122-194°F / 50-90°C
Over-temperature safety cut-out

CONTROLS - Proofer (P8M)
Off / Proof / Holding mode selector switch
Mechanical thermostat 32-185°F / 20-85°C
Humidity level control
Cabinet temperature thermometer
Auto-fill water system standard

CLEANING
Stainless steel top and side exterior panels
Porcelain enameled oven chamber
Fully removable stainless steel oven and proofer side racks
Removable stainless steel oven fan baffle
Easy clean door system with hinge out door inner glass (no
tools required)
Removable plug-in oven door seal (no tools required)

SPECIFICATIONS
Electrical Requirements
Oven (E32D5)

208V, 60Hz, 1-phase, 5.8kW, 28A
220-240V, 50/60Hz, 1-phase, 6.5W, 27A
No cordset supplied

Proofer (P8M)

110-120V, 50/60Hz, 1-phase, 1.45kW, 11.6A
No cordset supplied

Water Requirements

Cold water connection ¾” GHT male
80psi maximum inlet pressure / 20psi minimum inlet pressure
Connection to oven optional

External Dimensions

Width 28
Height 61¾” / 1560mm
Depth 31

7

/8” / 735mm

7

/8” / 810mm

Nett Weight
Oven (E32D5)

196lbs / 89kg

Proofer (P8M)

171lbs / 77.5kg

Packing Data
Oven (E32D5)

231lbs / 105kg

20.1ft³ / 0.57m3
Width 29
Height 32” / 815mm
Depth 36

7

/8” / 760mm

3

/8” / 925mm

Proofer (P8M)

210lbs / 95.3kg

26.8 ft³ / 0.76m3
Width 30” / 760mm
Height 42½” / 1080mm
Depth 36

3

/8” / 925mm

INSTALLATION CLEARANCES

Rear 2” / 50mm
LH Side 2” / 50mm
RH Side* 3” / 75mm
* For fixed installations a minimum of 20” / 500mm is required
for service

CLEARANCE FROM SOURCES OF HEAT

A minimum distance of 12” / 300mm from the appliance sides
is required

www.moffat.com

U.S.A.

Moffat Inc

3765 Champion Boulevard

Winston-Salem

North Carolina 27105

Ph Toll Free 1-800-551 8795

Ph 336-661 0257

Fax [phone]

Email [e-mail]

www.moffat.com

Manufactured by:

Moffat Limited

16 Osborne Street PO Box 10-001

Christchurch 8081 New Zealand

"

8

3

1
6
/

m
m
0

6
5
1

ELECTRICAL

ENTRY

WATERINLET

WATERINLET

1

80 mm /3

"

ELECTRICAL

ENTRY

136mm/5

8

3

"

8

"
0

"

8

"

4

1

4

/

1

1

"

1

4

m

36

1

/

/

2

m

3

6

m

/

mm

1
0

3

1

0 m

8

mm

2

92

20
8

"

4

3

/ 4

mm
0

2
1

"
5
1
/

mm
1

VENT

38

"

8

5

2
2
/

m
m
5

7
5

25 mm

100 mm

Designed and manufactured by

ISO9001
All Turbofan products are designed and
manufactured by Moffat using the
internationally recognised ISO9001
quality management system, covering
design, manufacture and final inspection,
ensuring consistent high quality at all times.

In line with policy to continually develop
and improve its products, Moffat Limited
reserves the right to change specifications
and design without notice.

© Copyright Moffat Ltd
Moffat 1419 / 7.14

ISO9001

Quality
Management
Standard