Moffat E32D5 User Manual

E32D5 / P12M

TECHNICAL DATA SHEET FOR

E32D5 ON THE P12M Proofer/Holding Cabinet

Full Size Digital / Electric Convection Oven 12 Tray Manual / Electric Proofer/Holding Cabinet

STANDARD FEATURES

• Full size sheet pan capacity

• 5 tray Oven / 12 tray Proofer

• Compact 28

• Low unit height 69

• Side hinged doors (standard LH hinge) Optional RH hinge (ﬁeld convertible)

• Dual halogen lamps in Oven and Proofer

• Proofer with dual function Proof and Holding modes

OVEN

• 3

/3”/ 85mm tray spacing

• Electronic digital display Time and Temperature Controls

• Manual mode and Program mode 20 programs with 3 stage cooking and stage end alarms

NEW

Core Probe program cooking (optional Core Probe Kit)

NEW

Moisture injection mode (5 levels) and manual injection

NEW

2 speed bi-directional reversing fan system

NEW

• Safe-Touch vented door

• Porcelain enameled oven chamber

• Plug-in continuous oven door seal

• 5 oven wire racks supplied

• 100% recyclable packaging

PROOFER

• 2

/8”/ 74mm tray spacing

• Auto water ﬁll system with optional integrated water ﬁlter kit

• Continuous door seal

• Low velocity circulation fan system

• Mechanical thermostat and Humidity level control

• Cabinet temperature display thermometer

• 4 dia. 3” / 76mm castors with 2 front castors dual wheel and swivel lock, 2 rigid rear castors

• 100% recyclable packaging

ACCESSORIES

• Optional M236060 Core Temperature Probe Kit

• Optional 3M Cuno water ﬁlter kit complete with cartridge and connection ﬁttings

• Installs in pre-ﬁtted rear housing of cabinet for ﬂush rear installation

/8” / 735mm width

/8” / 1775mm

E32D5 Unit shall be a Moffat electrically heated Turbofan convection oven E.T.L. listed and NSF-4 listed. The oven shall have a one piece porcelain enameled oven

chamber, stainless top and sides and safe touch vented easy clean side hinged door that offers ﬁeld reversible hinging. Oven shall have capacity for ﬁve full size sheet pans. The oven shall be controlled by an electronic control having separate digital displays and adjusting knobs for time and temperature functions. The oven control shall allow both manual and programmed operating modes with programmable moisture injection, 2 speed oven fan, and 3 stage cooking. A core temperature probe M236060 is optional. The unit shall include dual halogen oven lamps. Unit shall be supplied in 100% recyclable shipping packaging.

P12M Unit shall be a Moffat electrically heated Turbofan Proofer and Holding Cabinet ETL Listed and NSF-4 listed. The proofer and holding cabinet shall have double

skin construction with stainless steel interior and exterior sides, front and top. Door shall be side hinged and ﬁeld reversible. Unit shall have capacity for up to 24 half size sheet pans or 12 full size sheet pans. A single speed fan shall gently and evenly circulate air around the cabinet. Cabinet shall be controlled by a mechanical thermostat and humidity via a control of the water tank. A thermometer shall indicate the cabinet temperature. Proofer and holding cabinet shall be mounted on castors, with two rigid castors at rear and two swivel castors dual swivel and wheel lock and front. Proofer and Holding Cabinets shall be ﬁtted with NEMA 5-20P cordsets. Unit shall be supplied in 100% recyclable shipping packaging.

/ 2

735 mm /28

" 810 mm /31

5 m

m /

15"

306 mm / 12"

VENT

65 mm /2

25 mm /1"

100 mm /3

135

ELECTRICAL

ENTRY

ELECTRICAL

ENTRY

WATERINLET

0 m

80 mm /3

E32D5 / P12M

E32D5 Full Size Digital / Electric Convection Oven - 2 speed fan P12M Full Size Manual / Electric Proofer/Holding Cabinet

CONSTRUCTION - Oven (E32D5)

Porcelain enameled fully welded oven chamber Stainless steel front, sides and top exterior Stainless steel frame side hinged door

0.2” / 5mm thick door inner and outer glass Stainless steel control panel Aluminized coated steel base and rear panels

CONSTRUCTION - Proofer (P12M)

304 stainless steel interior cabinet Stainless steel front, sides and top exterior Stainless steel interior side racks Stainless steel frame side hinged door

0.2” / 5mm thick door glass Stainless steel control panel Aluminized coated steel base and rear panels

CONTROLS - Oven (E32D5) Electronic controls with Digital Time and Temperature display, Manual or Program modes Large ¾” / 20mm high LED displays Two individual time and temperature setting control knobs ON/OFF and Oven Lights key Fan LO speed key Timer Start/Stop key Moisture Injection key (5 levels) Programs select key Actual temperature display key Adjustable buzzer/alarm volume Thermostat range 150-500°F / 50-260°C Timer range from 180 minute in countdown mode / 999 minute in count-up mode Optional Core Probe temperature range 122-194°F / 50-90°C Over-temperature safety cut-out

CONTROLS - Proofer (P12M) Off / Proof / Holding mode selector switch Mechanical thermostat 32-185°F / 20-85°C Humidity level control Cabinet temperature thermometer Auto-ﬁll water system standard

CLEANING Stainless steel top and side exterior panels Porcelain enameled oven chamber Fully removable stainless steel oven and proofer side racks Removable stainless steel oven fan bafﬂe Easy clean door system with hinge out door inner glass (no tools required) Removable plug-in oven door seal (no tools required)

SPECIFICATIONS Electrical Requirements Oven (E32D5)

208V, 60Hz, 1-phase, 5.8kW, 28A 220-240V, 50/60Hz, 1-phase, 6.5W, 27A No cordset supplied

Proofer (P12M)

110-120V, 50/60Hz, 1-phase, 1.95kW, 15.6A NEMA 5-20P cordset ﬁtted

Water Requirements

Cold water connection ¾” GHT male 80psi maximum inlet pressure / 20psi minimum inlet pressure Connection to oven optional

External Dimensions

Width 28 Height 69” / 1775mm Depth 31

/8” / 735mm

/8” / 810mm

Nett Weight Oven (E32D5)

196lbs / 89kg

Proofer (P12M)

194lbs / 88kg

Packing Data Oven (E32D5)

231lbs / 105kg

20.1ft³ / 0.57m3 Width 29 Height 32” / 665mm Depth 36

/8” / 760mm

/8” / 925mm

Proofer (P12M)

236lbs / 107kg

32.1 ft³ / 0.91m3 Width 30” / 760mm Height 51” / 1295mm Depth 36

/8” / 925mm

INSTALLATION CLEARANCES

Rear 2” / 50mm LH Side 2” / 50mm RH Side* 3” / 75mm * For ﬁxed installations a minimum of 20” / 500mm is required for service

CLEARANCE FROM SOURCES OF HEAT

A minimum distance of 12” / 300mm from the appliance sides is required

www.moffat.com

U.S.A.

Moffat Inc

3765 Champion Boulevard

Winston-Salem

North Carolina 27105

Ph Toll Free 1-800-551 8795

Ph 336-661 0257

Fax 336-661 9546

Email sales@moffat.com

www.moffat.com

Manufactured by:

Moffat Limited

16 Osborne Street PO Box 10-001

Christchurch 8081 New Zealand

ISO9001

Quality Management Standard

Designed and manufactured by

ISO9001 All Turbofan products are designed and manufactured by Moffat using the internationally recognised ISO9001 quality management system, covering design, manufacture and ﬁnal inspection, ensuring consistent high quality at all times.

In line with policy to continually develop and improve its products, Moffat Limited reserves the right to change speciﬁcations and design without notice.