Moffat E22M3-2 User Manual

TECHNICAL DATA SHEET FOR

E22M3 DOUBLE STACKED

Half Size Manual / Electric Convection Ovens Double Stacked on a Stainless Steel Base Stand

E22M3/2 - Double stack with adjustable feet base stand

E22M3/2C - Double stack with castor base stand

DOUBLE STACK FEATURES

• Two 3 half size sheet pan capacity ovens

• Compact 24”/ 610mm width

• Full stainless steel base stand

• Full stainless steel oven spacer frame

• Adjustable feet or castor models

• Guard rail for bottom oven

OVEN FEATURES (each)

• 3 half size sheet pan capacity

/8”/ 70mm tray spacing

• 2

• Single direction low-velocity fan

• 1.5kW heating power

• 110-120V plug-in 15A NEMA 5-15P cordset ﬁtted

• Porcelain enameled oven chamber

• Plug-in continuous oven door seal

• Safe-Touch vented drop down door

• Stay-Cool door handle

• Heavy-duty door hinges

• Easy clean door glass system

• Mechanical thermostat 150-500°F / 50-260°C

• 60 minute timer with time up alarm

• 3 oven wire racks supplied

E 2 2 M 3 / 2

E 2 2 M 3 / 2 C

Model E22M3/2C shown

E22M3/2 E22M3/2C

E22M3 ovens shall be Moffat electrically heated Turbofan convection ovens E.T.L. listed and NSF-4 listed. The ovens shall have a one piece porcelain enameled oven chamber, stainless top and sides and safe touch vented easy clean drop down door. Ovens shall have capacity for three half size sheet pans. The ovens shall have a single direction low velocity fan system. The ovens shall be controlled by a mechanical thermostat with a range of 150-500°F / 50-260°C, and 60 minute bake timer. Ovens shall be ﬁtted with a NEMA 5-15P cordset. Ovens shall be double stacked using Double Stacking Kits DSK2223 (adjustable feet option) or DSK2223C (castor option). Units shall be supplied in 100% recyclable shipping packaging.

Double stack models are supplied as two individual ovens and a double stacking kit for ﬁeld assembly.

137 mm / 5

E 2 2 M 3 / 2 E 2 2 M 3 / 2 C

E22M3/2 E22M3/2C Half Size

Manual / Electric Convection Ovens Double Stacked on a Stainless Steel Base Stand

CONSTRUCTION - OVENS

Porcelain enameled fully welded oven chamber Stainless steel front, sides and top exterior Stainless steel oven fan bafﬂe Removable 3 position chrome plated wire side racks Oven racks chrome plated wire (3 supplied) Stainless steel frame drop down hinged door

0.2” / 5mm thick door outer glass

0.2” / 5mm thick low energy loss door inner glass Heavy-duty counterbalanced door hinges Wear resistant powder coated welded door handle Stainless steel control panel Aluminized coated steel base and rear panels

CONSTRUCTION - DOUBLE STACKING KIT

All stainless steel construction Welded 1½” and 1¼” square tube front and rear frame base stand 4 adjustable feet on E22M3/2 4 dia. 3” / 76mm swivel castors with 2 front castors dual wheel and swivel lock on E22M3/2C Stainless steel oven spacer frame Aluminized steel bottom oven vent extension

CONTROLS (each oven) Power ON control panel indicator Mechanical thermostat 150-500°F / 50-260°C Heating ON control panel indicator Manual 60 minute timer Time-Up control panel indicator and buzzer

CLEANING Stainless steel top and sides continuous exterior panel Porcelain enameled oven chamber Fully removable chrome plated oven side racks Removable stainless steel oven fan bafﬂe Easy clean door system with hinge out door inner glass (no tools required) Removable plug-in oven door seal (no tools required)

SPECIFICATIONS Electrical Requirements (each oven)

110-120V, 50/60Hz, 1-phase, 1.5kW, 12A NEMA 5-15P cordset ﬁtted

External Dimensions

Width 24” / 610mm Height 57½” / 1461mm (E22M3/2) 60¾” / 1543mm (E22M3/2C) Depth 25

/8” / 645mm

Oven Internal Dimensions (each oven)

Width 19½” / 495mm Height 10” / 250mm Depth 13

/8” / 340mm

Volume 1.48ft³ / 0.042m3

Oven Rack Dimensions

Width 18” / 460mm Depth 13” / 330mm

Nett Weight (double stack complete)

192lbs / 87kg

Packing Data (E22M3 ovens each)

106lbs / 48kg 12ft³ / 0.34m3 Width 29½” / 750mm Height 27¾” / 705mm Depth 25” / 635mm

Packing Data (Stacking Kit)

33lbs / 15kg (DSK2223 - adjustable feet) 40lbs / 18kg (DSK2223C - castor)

2.8ft³ / 0.08m3 Width 23 Height 33 Depth 6

/4” / 590mm

/8” / 840mm

/4” / 160mm

Supplied CKD for assembly on site

Double Stacking Kits

For after market double stacking two E22M3 convection ovens DSK2223 - Double stacking kit - adjustable feet DSK2223C - Double stacking kit - castor

www.moffat.com

U.S.A.

Moffat Inc

3765 Champion Boulevard

Winston-Salem

North Carolina 27105

Ph Toll Free 1-800-551 8795

Ph 336-661 0257

Fax 336-661 9546

Email sales@moffat.com

www.moffat.com

Manufactured by:

Moffat Limited

16 Osborne Street PO Box 10-001

Christchurch 8081 New Zealand

Designed and manufactured by

ISO9001 All Turbofan products are designed and manufactured by Moffat using the internationally recognised ISO9001 quality management system, covering design, manufacture and ﬁnal inspection, ensuring consistent high quality at all times.

In line with policy to continually develop and improve its products, Moffat Limited reserves the right to change speciﬁcations and design without notice.

ISO9001

Quality Management Standard

VENT

192 mm / 7

55 mm / 2

488 mm / 19

330 mm / 13"645 mm / 25

1 /

mm 7

7 /

m m

0 9 1

610 mm / 24"

8 3 /

m m 2

8 9

7 1

/ m m 4

569 mm / 22

VENT

ELECTRICAL

ENTRY

9 3 /

ELECTRICAL

ENTRY

mm 2

01 1

" 9 1

/ m m 4

8 4